Flash_pan

Flash pan

Flash pan

Firearm component

The flash pan or priming pan is a small receptacle for priming powder, found next to the touch hole on muzzle-loading guns. Flash pans are found on gonnes, matchlocks, wheellocks, snaplocks, snaphances, and flintlocks.

A matchlock firearm with its flash pan visible at center as a U-shaped depression

Development

The flash pan was at first attached to the gun barrel, but was later moved to the lock plate of the gun. A small amount of finely ground gunpowder is placed in the flash pan and ignited. The flash of flame travels through the touch hole igniting the main charge of propellant inside the barrel. Unlike the cannon, it was not necessary (or desirable) to place priming in the touch hole itself. The flash alone, and not particles of burning powder, was enough to ignite the main charge.

"Flash in the pan"

The ignition of the main charge from the flash pan was not a guaranteed operation, however, and sometimes it failed. In those cases the spark would flash in the pan, but the gun would fail to fire. This led by the end of the 17th century to the expression "flash in the pan" to mean a failure after a brief and showy start, or momentary sensation of no real importance.[1]

Flash in the pan

See also

Notes

  1. [1]
    Elkanah Settle, in Reflections on several of Mr. Dryden's plays (1687,) had this to say: "If Cannons were so well bred in his Metaphor as only to flash in the Pan, I dare lay an even wager that Mr. Dryden durst venture to Sea." "The Phrase Finder: Flash in the pan". Retrieved 2012-04-18.


This firearms-related article is a stub. You can help Wikipedia by expanding it.
Share this article:

This article uses material from the Wikipedia article Flash_pan, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.