Whim_gin

Whim (mining)

Whim (mining)

Mining device


A whim, also called a whim gin or a horse capstan, is a device similar to a windlass which is used in mining for hauling materials to the surface. It comprises a capstan or a wide drum with a vertical axle. A rope is wound around the drum, with both ends traversing several pulleys and hanging down the mine shaft. As the drum is turned around, one end of the rope is lowered, carrying an empty bucket, while the other one is raised, carrying a full load.[1][2][3]

A large horse whim at a historic silver mine in Germany

The major benefit of a whim is that its operation can be performed at a distance from the shaft, thus resolving some of the congestion. Early whims were horse-powered, but later they were powered by waterwheels or steam engines, including the most advanced Cornish engines. Whims were used in coal mines until the end of the nineteenth century.[4]

Horse whims were also used to power team boats.[5]

The gin wheel at Nottingham Industrial Museum dating from 1844, is a wooden drum, set on a vertical pole within a wooden frame, with a horizontal shaft from the drum for attaching to a horse. Before joining the other exhibits at Nottingham Industrial Museum, the whim was used at Langton and Pinxton Collieries.[citation needed]


References

Citations

  1. "A Whim-gin". victorianweb.org. Retrieved 14 December 2010.
  2. Henry Moseley (1869). The Mechanical Principles of Engineering and Architecture. New York, Wiley & Halstead. pp. 202–203.
  3. Jones 2011, p. 145.
  4. Kenneth Hudson (1979). World industrial archaeology. CUP Archive. pp. 43–44.

General and cited sources


Share this article:

This article uses material from the Wikipedia article Whim_gin, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.