Minimum level of demand on an electrical grid over a span of time
The base load[1] (also baseload) is the minimum level of demand on an electrical grid over a span of time, for example, one week. This demand can be met by unvarying power plants,[2]dispatchable generation,[3] or by a collection of smaller intermittent energy sources,[4] depending on which approach has the best mix of cost, availability and reliability in any particular market. The remainder of demand, varying throughout a day, is met by dispatchable generation which can be turned up or down quickly, such as load following power plants, peaking power plants, or energy storage.
Power plants that do not change their power output quickly, such as large coal or nuclear plants, are generally called baseload power plants.[2][5][6] Historically, most or all of base load demand was met with baseload power plants, whereas new capacity based around renewables often employs flexible generation.[7]
While historically large power grids used unvarying power plants to meet the base load, there is no specific technical requirement for this to be so. The base load can equally well be met by the appropriate quantity of intermittent power sources and dispatchable generation.[3][4]
The desirable attribute of dispatchability applies to some gas plants, wind (through blade pitch)[citation needed] and hydroelectricity. Grid operators also use curtailment to shut plants out of the grid when their energy is not needed.[11][12]
Economics
Grid operators solicit bids to find the cheapest sources of electricity over short and long term buying periods.[13]
Coal and nuclear power plants do not change production to match power consumption demands since it is more economical to operate them at constant production levels, and not all power plants are designed for it. However, some nuclear power stations, such as those in France, are physically capable of being used as load following power plants and do alter their output, to some degree, to help meet varying demands.[16][moved resource?][17][moved resource?]
Some combined-cycle plants usually fuelled by gas, can provide baseload power,[18] as well as being able to be cost-effectively cycled up and down to match more rapid fluctuations in consumption.
Donald G. Fink, H. Wayne Beatty (ed), Standard Handbook for Electrical Engineers, Eleventh Edition, Mc-Graw Hill, 1978 ISBN9780070209749, pp. 12-16 through 12-18
This article uses material from the Wikipedia article Base-load, and is written by contributors.
Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.