In mechanical engineering, the Beale number is a parameter that characterizes the performance of Stirling engines. It is often used to estimate the power output of a Stirling engine design. For engines operating with a high temperature differential, typical values for the Beale number are in the range 0.11−0.15; where a larger number indicates higher performance.

This article does not cite any sources. (November 2018)

The Beale number can be defined in terms of a Stirling engine's operating parameters:

${\displaystyle B_{n}={\frac {Wo}{PVF}}}$

where:

• B_n is the Beale number
• Wo is the power output of the engine (watts)
• P is the mean average gas pressure (Pa) or (MPa, if volume is in cm³)
• V is swept volume of the power piston (m³, or cm³, if pressure is in MPa)
• F is the engine cycle frequency (Hz)

To estimate the power output of an engine, nominal values are assumed for the Beale number, pressure, swept volume and frequency, then the power is calculated as the product of these parameters, as follows:

${\displaystyle Wo=B_{n}PVF}$

• West number

• Stirling Engine Performance Calculator
• Beale number calculator

This thermodynamics-related article is a stub. You can help Wikipedia by expanding it.

• v
• t
• e

This article about a mechanical engineering topic is a stub. You can help Wikipedia by expanding it.

• v
• t
• e