In geometry, a Coxeter–Dynkin diagram (or Coxeter diagram, Coxeter graph) is a graph with numerically labeled edges (called branches) representing a Coxeter group or sometimes a uniform polytope or uniform tiling constructed from the group.

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article may be too technical for most readers to understand. (December 2022) This article needs additional citations for verification. (December 2023)

Dynkin diagrams are closely related objects, which differ from Coxeter diagrams in two respects: firstly, branches labeled "4" or greater are directed, while Coxeter diagrams are undirected; secondly, Dynkin diagrams must satisfy an additional (crystallographic) restriction, namely that the only allowed branch labels are 2, 3, 4, and 6. Dynkin diagrams correspond to and are used to classify root systems and therefore semisimple Lie algebras.^[1]

A Coxeter group is a group that admits a presentation:

$${\displaystyle \langle r_{0},r_{1},\dots ,r_{n}\mid (r_{i}r_{j})^{m_{i,j}}=1\rangle }$$

where the m_i,j are the elements of some symmetric matrix M which has 1s on its diagonal.^{[lower-alpha 1]} This matrix M, the Coxeter matrix, completely determines the Coxeter group.

Since the Coxeter matrix is symmetric, it can be viewed as the adjacency matrix of an edge-labeled graph that has vertices corresponding to the generators r_i, and edges labeled with m_i,j between the vertices corresponding to r_i and r_j. In order to simplify these diagrams, two changes can be made:

• Edges that are labeled with 2 can be omitted, with the missing edges being implied to be 2s. A label 2 indicates that the corresponding two generators commute; 2 is the smallest number that can be used to label an edge.
• Edges labeled 3 can be left unlabeled, with the implication that an unlabeled edge acts as a 3.

The resulting graph is a Coxeter-Dynkin diagram that describes the considered Coxeter group.

Every Coxeter diagram has a corresponding Schläfli matrix (so named after Ludwig Schläfli), A, with matrix elements a_i,j = a_j,i = −2 cos(π/p_i,j) where p_i,j is the branch order between mirrors i and j; that is, π/p_i,j is the dihedral angle between mirrors i and j. As a matrix of cosines, A is also called a Gramian matrix. All Coxeter group Schläfli matrices are symmetric because their root vectors are normalized. A is closely related to the Cartan matrix, used in the similar but directed graph: the Dynkin diagram, in the limited cases of p = 2,3,4, and 6, which are generally not symmetric.

The determinant of the Schläfli matrix is called the Schläflian;^{[citation needed]} the Schläflian and its sign determine whether the group is finite (positive), affine (zero), or indefinite (negative).^[2] This rule is called Schläfli's Criterion.^{[3][failed verification]}

The eigenvalues of the Schläfli matrix determine whether a Coxeter group is of finite type (all positive), affine type (all non-negative, at least one is zero), or indefinite type (otherwise). The indefinite type is sometimes further subdivided, e.g. into hyperbolic and other Coxeter groups. However, there are multiple non-equivalent definitions for hyperbolic Coxeter groups. We use the following definitions:

• A Coxeter group with connected diagram is hyperbolic if it is neither of finite nor affine type, but every proper connected subdiagram is of finite or affine type.
• A hyperbolic Coxeter group is compact if all its subgroups are finite (i.e. have positive determinants), and paracompact if all its subgroups are finite or affine (i.e. have nonnegative determinants).

Finite and affine groups are also called elliptical and parabolic respectively. Hyperbolic groups are also called Lannér, after F. Lannér who enumerated the compact hyperbolic groups in 1950,^[4] and Koszul (or quasi-Lannér) for the paracompact groups.

Rank 2 Coxeter groups

The type of a rank 2 Coxeter group, i.e. generated by two different mirrors, is fully determined by the determinant of the Schläfli matrix, as this determinant is simply the product of the eigenvalues: finite (positive determinant), affine (zero determinant), or hyperbolic (negative determinant) type. Coxeter uses an equivalent bracket notation which lists sequences of branch orders as a substitute for the node-branch graphic diagrams. Rational solutions [p/q], , also exist, with gcd(p,q) = 1; these define overlapping fundamental domains. For example, 3/2, 4/3, 5/2, 5/3, 5/4, and 6/5.

More information Type, Finite ...

Type	Finite					Affine	Hyperbolic
Geometry					...
Coxeter diagram Bracket notation	[ ]	[2]	[3]	[4]	[p]	[∞]	[∞]	[iπ/λ]
Order	2	4	6	8	2p	∞
Mirror lines are colored to correspond to Coxeter diagram nodes. Fundamental domains are alternately colored.

Close

More information , ...

Rank 2 Coxeter group diagrams
Order p	Group	Coxeter diagram		Schläfli matrix
				${\displaystyle \left[{\begin{matrix}2&a_{12}\\a_{21}&2\end{matrix}}\right]}$	Determinant ${\displaystyle (4-a_{21}a_{12})}$
Finite (Determinant > 0)
2	I2(2) = A1×A1		[2]	${\displaystyle \left[{\begin{smallmatrix}2&0\\0&2\end{smallmatrix}}\right]}$	4
3	I2(3) = A2		[3]	${\displaystyle \left[{\begin{smallmatrix}2&-1\\-1&2\end{smallmatrix}}\right]}$	3
3/2			[3/2]	${\displaystyle \left[{\begin{smallmatrix}2&1\\1&2\end{smallmatrix}}\right]}$
4	I2(4) = B2		[4]	${\displaystyle \left[{\begin{smallmatrix}2&-{\sqrt {2}}\\-{\sqrt {2}}&2\end{smallmatrix}}\right]}$	2
4/3			[4/3]	${\displaystyle \left[{\begin{smallmatrix}2&{\sqrt {2}}\\{\sqrt {2}}&2\end{smallmatrix}}\right]}$
5	I2(5) = H2		[5]	${\displaystyle \left[{\begin{smallmatrix}2&-\phi \\-\phi &2\end{smallmatrix}}\right]}$	${\displaystyle (5-{\sqrt {5}})/2}$ ≈ 1.38196601125
5/4			[5/4]	${\displaystyle \left[{\begin{smallmatrix}2&\phi \\\phi &2\end{smallmatrix}}\right]}$
5/2			[5/2]	${\displaystyle \left[{\begin{smallmatrix}2&1-\phi \\1-\phi &2\end{smallmatrix}}\right]}$	${\displaystyle (5+{\sqrt {5}})/2}$ ≈ 3.61803398875
5/3			[5/3]	${\displaystyle \left[{\begin{smallmatrix}2&\phi -1\\\phi -1&2\end{smallmatrix}}\right]}$
6	I2(6) = G2		[6]	${\displaystyle \left[{\begin{smallmatrix}2&-{\sqrt {3}}\\-{\sqrt {3}}&2\end{smallmatrix}}\right]}$	1
6/5			[6/5]	${\displaystyle \left[{\begin{smallmatrix}2&{\sqrt {3}}\\{\sqrt {3}}&2\end{smallmatrix}}\right]}$
8	I2(8)		[8]	${\displaystyle \left[{\begin{smallmatrix}2&-{\sqrt {2+{\sqrt {2}}}}\\-{\sqrt {2+{\sqrt {2}}}}&2\end{smallmatrix}}\right]}$	${\displaystyle 2-{\sqrt {2}}}$ ≈ 0.58578643763
10	I2(10)		[10]	${\displaystyle \left[{\begin{smallmatrix}2&-{\sqrt {(5+{\sqrt {5}})/2}}\\-{\sqrt {(5+{\sqrt {5}})/2}}&2\end{smallmatrix}}\right]}$	${\displaystyle (3-{\sqrt {5}})/2}$ ≈ 0.38196601125
12	I2(12)		[12]	${\displaystyle \left[{\begin{smallmatrix}2&-{\sqrt {2+{\sqrt {3}}}}\\-{\sqrt {2+{\sqrt {3}}}}&2\end{smallmatrix}}\right]}$	${\displaystyle 2-{\sqrt {3}}}$ ≈ 0.26794919243
p	I2(p)		[p]	${\displaystyle \left[{\begin{smallmatrix}2&-2\cos(\pi /p)\\-2\cos(\pi /p)&2\end{smallmatrix}}\right]}$	${\displaystyle 4\sin ^{2}(\pi /p)}$
Affine (Determinant = 0)
∞	I2(∞) = ${\displaystyle {\tilde {I}}_{1}}$ = ${\displaystyle {\tilde {A}}_{1}}$		[∞]	${\displaystyle \left[{\begin{smallmatrix}2&-2\\-2&2\end{smallmatrix}}\right]}$	0
Hyperbolic (Determinant ≤ 0)
∞			[∞]	${\displaystyle \left[{\begin{smallmatrix}2&-2\\-2&2\end{smallmatrix}}\right]}$	0
∞			[iπ/λ]	${\displaystyle \left[{\begin{smallmatrix}2&-2\cosh(2\lambda )\\-2\cosh(2\lambda )&2\end{smallmatrix}}\right]}$	${\displaystyle -4\sinh ^{2}(2\lambda )\leq 0}$

Close

Geometric visualizations

The Coxeter–Dynkin diagram can be seen as a graphic description of the fundamental domain of mirrors. A mirror represents a hyperplane within a given dimensional spherical, Euclidean, or hyperbolic space. (In 2D spaces, a mirror is a line; in 3D, a mirror is a plane.)

These visualizations show the fundamental domains for 2D and 3D Euclidean groups, and for 2D spherical groups. For each, the Coxeter diagram can be deduced by identifying the hyperplane mirrors and labelling their connectivity, ignoring 90-degree dihedral angles (order 2; see footnote [a] below).

Coxeter groups in the Euclidean plane with equivalent diagrams. Here, domain vertices are labeled as graph branches 1, 2, etc., and are colored by their reflection order (connectivity). Reflections are labeled as graph nodes R1, R2, etc. Reflections at 90 degrees are inactive in the sense that, together, they generate no new reflections;[lower-alpha 2] they are therefore not connected to each other by a branch on the diagram. Parallel mirrors are connected to each other by an ∞ labeled branch. The square of the prismatic group ${\displaystyle {\tilde {I}}_{1}}$×${\displaystyle {\tilde {I}}_{1}}$ is shown as a doubling of the ${\displaystyle {\tilde {C}}_{2}}$ triangle around its R2 side*, but can also be created as a rectangular domain from doubling the ${\displaystyle {\tilde {G}}_{2}}$ triangle around its R2 side*. The ${\displaystyle {\tilde {A}}_{2}}$ triangle is a doubling of the ${\displaystyle {\tilde {G}}_{2}}$ triangle around its R3 side*. *(this side disappears by doubling around itself)
Many Coxeter groups in the hyperbolic plane can be extended from the Euclidean cases as a series of hyperbolic solutions.
Coxeter groups in 3-space with diagrams. Mirrors (triangle faces) are labeled by opposite vertex: 0, ..., 3. Branches are colored by their reflection order. ${\displaystyle {\tilde {C}}_{3}}$ fills 1/48 of the cube. ${\displaystyle {\tilde {B}}_{3}}$ fills 1/24 of the cube. ${\displaystyle {\tilde {A}}_{3}}$ fills 1/12 of the cube.	Coxeter groups in the sphere with equivalent diagrams. One fundamental domain is outlined in yellow. Domain vertices (and graph branches) are colored by their reflection order.

In constructing uniform polytopes, nodes are marked as active by a ring if a generator point is off the mirror, creating a new edge between a generator point and its mirror image. An unringed node represents an inactive mirror that generates no new points. A ring with no node is called a hole.

Two orthogonal mirrors can be used to generate a square, , seen here with a red generator point and 3 virtual copies across the mirrors. The generator has to be off both mirrors in this orthogonal case to generate an interior. The ring markup presumes active rings have generators equal distance from all mirrors, while a rectangle can also represent a nonuniform solution.

Coxeter–Dynkin diagrams can explicitly enumerate nearly all classes of uniform polytope and uniform tessellations. Every uniform polytope with pure reflective symmetry (all but a few special cases have pure reflectional symmetry) can be represented by a Coxeter–Dynkin diagram with permutations of markups. Each uniform polytope can be generated using such mirrors and a single generator point: mirror images create new points as reflections, then polytope edges can be defined between points and a mirror image point. Faces are generated by the repeated reflection of an edge eventually wrapping around to the original generator; the final shape, as well as any higher-dimensional facets, are likewise created by the face being reflected to enclose an area.

To specify the generating vertex, one or more nodes are marked with rings, meaning that the vertex is not on the mirror(s) represented by the ringed node(s). (If two or more mirrors are marked, the vertex is equidistant from them.) A mirror is active (creates reflections) only with respect to points not on it. A diagram needs at least one active node to represent a polytope. An unconnected diagram (subgroups separated by order-2 branches, or orthogonal mirrors) requires at least one active node in each subgraph.

All regular polytopes, represented by Schläfli symbol {p, q, r, ...}, can have their fundamental domains represented by a set of n mirrors with a related Coxeter–Dynkin diagram of a line of nodes and branches labeled by p, q, r, ..., with the first node ringed.

Uniform polytopes with one ring correspond to generator points at the corners of the fundamental domain simplex. Two rings correspond to the edges of simplex and have a degree of freedom, with only the midpoint as the uniform solution for equal edge lengths. In general k-ring generator points are on (k-1)-faces of the simplex, and if all the nodes are ringed, the generator point is in the interior of the simplex.

The special case of uniform polytopes with non-reflectional symmetry is represented by a secondary markup where the central dot of a ringed node is removed (called a hole). These shapes are alternations of polytopes with reflective symmetry, implying that every other vertex is deleted. The resulting polytope will have a subsymmetry of the original Coxeter group. A truncated alternation is called a snub.

• A single node represents a single mirror. This is called group A₁. If ringed this creates a line segment perpendicular to the mirror, represented as {}.
• Two unattached nodes represent two perpendicular mirrors. If both nodes are ringed, a rectangle can be created, or a square if the point is at equal distance from both mirrors.
• Two nodes attached by an order-n branch can create an n-gon if the point is on one mirror, and a 2n-gon if the point is off both mirrors. This forms the I₁(n) group.
• Two parallel mirrors can represent an infinite polygon I₁(∞) group, also called Ĩ₁.
• Three mirrors in a triangle form images seen in a traditional kaleidoscope and can be represented by three nodes connected in a triangle. Repeating examples will have branches labeled as (3 3 3), (2 4 4), (2 3 6), although the last two can be drawn as a line (with the 2 branches ignored). These will generate uniform tilings.
• Three mirrors can generate uniform polyhedra; including rational numbers gives the set of Schwarz triangles.
• Three mirrors with one perpendicular to the other two can form the uniform prisms.

The duals of the uniform polytopes are sometimes marked up with a perpendicular slash replacing ringed nodes, and a slash-hole for hole nodes of the snubs. For example, represents a rectangle (as two active orthogonal mirrors), and represents its dual polygon, the rhombus.

Examples with polyhedra and tilings

For example, the B₃ Coxeter group has a diagram: . This is also called octahedral symmetry.

There are 7 convex uniform polyhedra that can be constructed from this symmetry group and 3 from its alternation subsymmetries, each with a uniquely marked up Coxeter–Dynkin diagram. The Wythoff symbol represents a special case of the Coxeter diagram for rank 3 graphs, with all 3 branch orders named, rather than suppressing the order 2 branches. The Wythoff symbol is able to handle the snub form, but not general alternations without all nodes ringed.

More information Uniform octahedral polyhedra, Symmetry: [4,3], (*432) ...

Uniform octahedral polyhedra
Symmetry: [4,3], (*432)							[4,3]+ (432)	[1+,4,3] = [3,3] (*332)		[3+,4] (3*2)
{4,3}	t{4,3}	r{4,3} r{31,1}	t{3,4} t{31,1}	{3,4} {31,1}	rr{4,3} s2{3,4}	tr{4,3}	sr{4,3}	h{4,3} {3,3}	h2{4,3} t{3,3}	s{3,4} s{31,1}
		=	=	=				= or	= or	=
Duals to uniform polyhedra
V43	V3.82	V(3.4)2	V4.62	V34	V3.43	V4.6.8	V34.4	V33	V3.62	V35

Close

The same constructions can be made on disjointed (orthogonal) Coxeter groups like the uniform prisms, and can be seen more clearly as tilings of dihedrons and hosohedra on the sphere, like this [6]×[] or [6,2] family:

More information Uniform hexagonal dihedral spherical polyhedra, Symmetry: [6,2], (*622) ...

Uniform hexagonal dihedral spherical polyhedra
Symmetry: [6,2], (*622)							[6,2]+, (622)	[6,2+], (2*3)
{6,2}	t{6,2}	r{6,2}	t{2,6}	{2,6}	rr{6,2}	tr{6,2}	sr{6,2}	s{2,6}
Duals to uniforms
V62	V122	V62	V4.4.6	V26	V4.4.6	V4.4.12	V3.3.3.6	V3.3.3.3

Close

In comparison, the [6,3], family produces a parallel set of 7 uniform tilings of the Euclidean plane, and their dual tilings. There are again 3 alternations and some half symmetry version.

More information Symmetry: [6,3], (*632), [6,3]+ (632) ...

Uniform hexagonal/triangular tilings v t e
Symmetry: [6,3], (*632)							[6,3]+ (632)	[6,3+] (3*3)
{6,3}	t{6,3}	r{6,3}	t{3,6}	{3,6}	rr{6,3}	tr{6,3}	sr{6,3}	s{3,6}
63	3.122	(3.6)2	6.6.6	36	3.4.6.4	4.6.12	3.3.3.3.6	3.3.3.3.3.3
Uniform duals
V63	V3.122	V(3.6)2	V63	V36	V3.4.6.4	V.4.6.12	V34.6	V36

Close

In the hyperbolic plane [7,3], family produces a parallel set of uniform tilings, and their dual tilings. There is only 1 alternation (snub) since all branch orders are odd. Many other hyperbolic families of uniform tilings can be seen at uniform tilings in hyperbolic plane.

More information Symmetry: [7,3], (*732), [7,3]+, (732) ...

Uniform heptagonal/triangular tilings v t e
Symmetry: [7,3], (*732)							[7,3]+, (732)
{7,3}	t{7,3}	r{7,3}	t{3,7}	{3,7}	rr{7,3}	tr{7,3}	sr{7,3}
Uniform duals
V73	V3.14.14	V3.7.3.7	V6.6.7	V37	V3.4.7.4	V4.6.14	V3.3.3.3.7

Close

One usage includes a very-extended definition from the direct Dynkin diagram usage which considers affine groups as extended, hyperbolic groups over-extended, and a third node as very-extended simple groups. These extensions are usually marked by an exponent of 1,2, or 3 + symbols for the number of extended nodes. This extending series can be extended backwards, by sequentially removing the nodes from the same position in the graph, although the process stops after removing branching node. The E₈ extended family is the most commonly shown example extending backwards from E₃ and forwards to E₁₁.

The extending process can define a limited series of Coxeter graphs that progress from finite to affine to hyperbolic to Lorentzian. The determinant of the Cartan matrices determine where the series changes from finite (positive) to affine (zero) to hyperbolic (negative), and ending as a Lorentzian group, containing at least one hyperbolic subgroup.^[5] The noncrystallographic H_n groups forms an extended series where H₄ is extended as a compact hyperbolic and over-extended into a lorentzian group.

The determinant of the Schläfli matrix by rank are:^[6]

• det(A₁ⁿ = [2ⁿ⁻¹]) = 2ⁿ (Finite for all n)
• det(A_n = [3ⁿ⁻¹]) = n + 1 (finite for all n)
• det(B_n = [4,3ⁿ⁻²]) = 2 (finite for all n)
• det(D_n = [3^n−3,1,1]) = 4 (finite for all n)

Determinants of the Schläfli matrix in exceptional series are:

• det(E_n = [3^n−3,2,1]) = 9 − n (finite for E₃ (= A₂A₁), E₄ (= A₄), E₅ (= D₅), E₆, E₇ and E₈, affine at E₉ (${\displaystyle {\tilde {E}}_{8}}$), hyperbolic at E₁₀)
• det([3^n−4,3,1]) = 2(8 − n) (finite for n = 4 to 7, affine (${\displaystyle {\tilde {E}}_{7}}$), and hyperbolic at n = 8.)
• det([3^n−4,2,2]) = 3(7 − n) (finite for n = 4 to 6, affine (${\displaystyle {\tilde {E}}_{6}}$), and hyperbolic at n = 7.)
• det(F_n = [3,4,3ⁿ⁻³]) = 5 − n (finite for F₃ (= B₃) to F₄, affine at F₅ (${\displaystyle {\tilde {F}}_{4}}$), hyperbolic at F₆)
• det(G_n = [6,3ⁿ⁻²]) = 3 − n (finite for G₂, affine at G₃ (${\displaystyle {\tilde {G}}_{2}}$), hyperbolic at G₄)

More information , ...

Smaller extended series

Finite	${\displaystyle A_{2}}$	${\displaystyle C_{2}}$	${\displaystyle G_{2}}$	${\displaystyle A_{3}}$	${\displaystyle B_{3}}$	${\displaystyle C_{3}}$	${\displaystyle H_{4}}$
Rank n	[3[3],3n−3]	[4,4,3n−3]	Gn=[6,3n−2]	[3[4],3n−4]	[4,31,n−3]	[4,3,4,3n−4]	Hn=[5,3n−2]
2	[3] A2	[4] C2	[6] G2		[2] A12	[4] C2	[5] H2
3	[3[3]] ${\displaystyle A_{2}^{+}={\tilde {A}}_{2}}$	[4,4] ${\displaystyle C_{2}^{+}={\tilde {C}}_{2}}$	[6,3] ${\displaystyle G_{2}^{+}={\tilde {G}}_{2}}$	[3,3]=A3	[4,3] B3	[4,3] C3	[5,3] H3
4	[3[3],3] ${\displaystyle A_{2}^{++}={\overline {P}}_{3}}$	[4,4,3] ${\displaystyle C_{2}^{++}={\overline {R}}_{3}}$	[6,3,3] ${\displaystyle G_{2}^{++}={\overline {V}}_{3}}$	[3[4]] ${\displaystyle A_{3}^{+}={\tilde {A}}_{3}}$	[4,31,1] ${\displaystyle B_{3}^{+}={\tilde {B}}_{3}}$	[4,3,4] ${\displaystyle C_{3}^{+}={\tilde {C}}_{3}}$	[5,3,3] H4
5	[3[3],3,3] A2+++	[4,4,3,3] C2+++	[6,3,3,3] G2+++	[3[4],3] ${\displaystyle A_{3}^{++}={\overline {P}}_{4}}$	[4,32,1] ${\displaystyle B_{3}^{++}={\overline {S}}_{4}}$	[4,3,4,3] ${\displaystyle C_{3}^{++}={\overline {R}}_{4}}$	[5,33] H5=${\displaystyle {\overline {H}}_{4}}$
6				[3[4],3,3] A3+++	[4,33,1] B3+++	[4,3,4,3,3] C3+++	[5,34] H6
Det(Mn)	3(3−n)	2(3−n)	3−n	4(4−n)	2(4−n)

Close

More information , ...

Middle extended series

Finite	${\displaystyle A_{4}}$	${\displaystyle B_{4}}$	${\displaystyle C_{4}}$	${\displaystyle D_{4}}$	${\displaystyle F_{4}}$	${\displaystyle A_{5}}$	${\displaystyle B_{5}}$	${\displaystyle D_{5}}$
Rank n	[3[5],3n−5]	[4,3,3n−4,1]	[4,3,3,4,3n−5]	[3n−4,1,1,1]	[3,4,3n−3]	[3[6],3n−6]	[4,3,3,3n−5,1]	[31,1,3,3n−5,1]
3		[4,3−1,1] B2A1	[4,3] B3	[3−1,1,1,1] A13	[3,4] B3		[4,3,3] C3
4	[33] A4	[4,3,3] B4	[4,3,3] C4	[30,1,1,1] D4	[3,4,3] F4		[4,3,3,3−1,1] B3A1	[31,1,3,3−1,1] A3A1
5	[3[5]] ${\displaystyle A_{4}^{+}={\tilde {A}}_{4}}$	[4,3,31,1] ${\displaystyle B_{4}^{+}={\tilde {B}}_{4}}$	[4,3,3,4] ${\displaystyle C_{4}^{+}={\tilde {C}}_{4}}$	[31,1,1,1] ${\displaystyle D_{4}^{+}={\tilde {D}}_{4}}$	[3,4,3,3] ${\displaystyle F_{4}^{+}={\tilde {F}}_{4}}$	[34] A5	[4,3,3,3,3] B5	[31,1,3,3] D5
6	[3[5],3] ${\displaystyle A_{4}^{++}={\overline {P}}_{5}}$	[4,3,32,1] ${\displaystyle B_{4}^{++}={\overline {S}}_{5}}$	[4,3,3,4,3] ${\displaystyle C_{4}^{++}={\overline {R}}_{5}}$	[32,1,1,1] ${\displaystyle D_{4}^{++}={\overline {Q}}_{5}}$	[3,4,33] ${\displaystyle F_{4}^{++}={\overline {U}}_{5}}$	[3[6]] ${\displaystyle A_{5}^{+}={\tilde {A}}_{5}}$	[4,3,3,31,1] ${\displaystyle B_{5}^{+}={\tilde {B}}_{5}}$	[31,1,3,31,1] ${\displaystyle D_{5}^{+}={\tilde {D}}_{5}}$
7	[3[5],3,3] A4+++	[4,3,33,1] B4+++	[4,3,3,4,3,3] C4+++	[33,1,1,1] D4+++	[3,4,34] F4+++	[3[6],3] ${\displaystyle A_{5}^{++}={\overline {P}}_{6}}$	[4,3,3,32,1] ${\displaystyle B_{5}^{++}={\overline {S}}_{6}}$	[31,1,3,32,1] ${\displaystyle D_{5}^{++}={\overline {Q}}_{6}}$
8						[3[6],3,3] A5+++	[4,3,3,33,1] B5+++	[31,1,3,33,1] D5+++
Det(Mn)	5(5−n)	2(5−n)		4(5−n)	5−n	6(6−n)	4(6−n)

Close

More information , ...

Some higher extended series

Finite	${\displaystyle A_{6}}$	${\displaystyle B_{6}}$	${\displaystyle D_{6}}$	${\displaystyle E_{6}}$	${\displaystyle A_{7}}$	${\displaystyle B_{7}}$	${\displaystyle D_{7}}$	${\displaystyle E_{7}}$	${\displaystyle E_{8}}$
Rank n	[3[7],3n−7]	[4,33,3n−6,1]	[31,1,3,3,3n−6,1]	[3n−5,2,2]	[3[8],3n−8]	[4,34,3n−7,1]	[31,1,3,3,3,3n−7,1]	[3n−5,3,1]	En=[3n−4,2,1]
3									[3−1,2,1] E3=A2A1
4				[3−1,2,2] A22				[3−1,3,1] A3A1	[30,2,1] E4=A4
5		[4,3,3,3,3−1,1] B4A1	[31,1,3,3,3−1,1] D4A1	[30,2,2] A5				[30,3,1] A5	[31,2,1] E5=D5
6	[35] A6	[4,34] B6	[31,1,3,3,3] D6	[31,2,2] E6		[4,3,3,3,3,3−1,1] B5A1	[31,1,3,3,3,3−1,1] D5A1	[31,3,1] D6	[32,2,1] E6 *
7	[3[7]] ${\displaystyle A_{6}^{+}={\tilde {A}}_{6}}$	[4,33,31,1] ${\displaystyle B_{6}^{+}={\tilde {B}}_{6}}$	[31,1,3,3,31,1] ${\displaystyle D_{6}^{+}={\tilde {D}}_{6}}$	[32,2,2] ${\displaystyle E_{6}^{+}={\tilde {E}}_{6}}$	[36] A7	[4,35] B7	[31,1,3,3,3,30,1] D7	[32,3,1] E7 *	[33,2,1] E7 *
8	[3[7],3] ${\displaystyle A_{6}^{++}={\overline {P}}_{7}}$	[4,33,32,1] ${\displaystyle B_{6}^{++}={\overline {S}}_{7}}$	[31,1,3,3,32,1] ${\displaystyle D_{6}^{++}={\overline {Q}}_{7}}$	[33,2,2] ${\displaystyle E_{6}^{++}={\overline {T}}_{7}}$	[3[8]] ${\displaystyle A_{7}^{+}={\tilde {A}}_{7}}$ *	[4,34,31,1] ${\displaystyle B_{7}^{+}={\tilde {B}}_{7}}$ *	[31,1,3,3,3,31,1] ${\displaystyle D_{7}^{+}={\tilde {D}}_{7}}$ *	[33,3,1] ${\displaystyle E_{7}^{+}={\tilde {E}}_{7}}$ *	[34,2,1] E8 *
9	[3[7],3,3] A6+++	[4,33,33,1] B6+++	[31,1,3,3,33,1] D6+++	[34,2,2] E6+++	[3[8],3] ${\displaystyle A_{7}^{++}={\overline {P}}_{8}}$ *	[4,34,32,1] ${\displaystyle B_{7}^{++}={\overline {S}}_{8}}$ *	[31,1,3,3,3,32,1] ${\displaystyle D_{7}^{++}={\overline {Q}}_{8}}$ *	[34,3,1] ${\displaystyle E_{7}^{++}={\overline {T}}_{8}}$ *	[35,2,1] E9=${\displaystyle E_{8}^{+}={\tilde {E}}_{8}}$ *
10					[3[8],3,3] A7+++ *	[4,34,33,1] B7+++ *	[31,1,3,3,3,33,1] D7+++ *	[35,3,1] E7+++ *	[36,2,1] E10=${\displaystyle E_{8}^{++}={\overline {T}}_{9}}$ *
11									[37,2,1] E11=E8+++ *
Det(Mn)	7(7−n)	2(7−n)	4(7−n)	3(7−n)	8(8−n)	2(8−n)	4(8−n)	2(8−n)	9−n

Close