Coal refuse (also described as coal waste, rock, slag, coal tailings, waste material, rock bank, culm, boney, or gob[1]) is the material left over from coal mining, usually as tailings piles or spoil tips. For every tonne of hard coal generated by mining, 400kg (880lb) of waste material remains, which includes some lost coal that is partially economically recoverable.[2] Coal refuse is distinct from the byproducts of burning coal, such as fly ash.
Piles of coal refuse can have significant negative environmental consequences, including the leaching of iron, manganese, and aluminum residues into waterways and acid mine drainage.[3] The runoff can create both surface and groundwater contamination.[4] The piles also create a fire hazard, with the potential to spontaneously ignite. Because most coal refuse harbors toxic components, it is not easily reclaimed by replanting with plants like beach grasses.[5][6]
Gob (short for "garbage of bituminous"[7]) has about four times as much toxic mercury and more sulfur than typical coal.[1] Culm is the term for waste anthracite coal.[1]
Disposal
The first step to reclaiming land occupied by coal refuse piles is to remove the refuse matter.[8]
As fuel
Where economically viable, some coal miners try to reprocess these wastes. In more industrialized economies, this may include complex reprocessing,[9] such as fluidized bed combustion in power plants.[5] In less industrialized systems, manual sorting may be employed. For example, in the Jharia coalfield in eastern India, a large cohort of "coal cycle wallahs" manually sort mine tailings with their families, and then transport the salvaged coal on bicycles more than 60 kilometers to market.[10][11]
The burning of waste coal typically produces more environmental toxins than higher energy coals.[1] Modern fluidized bed combustion with limestone for acid gas control can lower toxin emissions to acceptable levels,[lower-alpha 1] concentrating the toxicity into waste ash. For every 100 tons of coal waste burned, 85 tons of waste ash (more toxic versions of fly ash and bottom ash) are created.[5] Fortunately, this ash is more stable than the waste and may simply be re-compacted into the mine site with less risk of leaching. It can also be used to neutralize acidic mine discharge.[8]
Other uses
There have been some attempts to use non-flammable coal waste in concrete production, similar to the use of fly ash.[12] The waste ash from burning of coal waste is approved as a source of fly ash by the West Virginia Department of Highways in 2019.[8]
By geography
United States
In the United States, most waste coal piles accumulated from 1900 to 1970 when processing techniques were less sophisticated.[13] The US has a longstanding inspection program of these refuse piles.[14] In Pennsylvania alone, there are over 770 such piles identified.[15] There are at least 18 coal waste burning plants in the United States,[16] mostly in Pennsylvania.
The Grant Town Power Project in West Virginia burns 530,000 tons of coal refuse annually, allowing the reclaimation of 30 acres of land per year.[8] Still, there's criticism regarding the plant's negative profitability and its greenhouse gas emissions from burning coal. The plant has controversially proposed pivoting to cryptocurrency mining for funding.[17] Wider replacement of cement by its fly ash should bring down its carbon footprint.[8]
Woodruff, D.; Macnamara, L. (1 January 2013), Osborne, Dave (ed.), "16 - Treatment of coal tailings", The Coal Handbook: Towards Cleaner Production, Woodhead Publishing Series in Energy, vol.1, Woodhead Publishing, pp.529–559, ISBN978-0-85709-422-3, retrieved 2 August 2020
Administration, United States Mining Enforcement and Safety (1976). Coal Refuse Inspection Manual. U.S. Department of the Interior, Mining Enforcement and Safety Administration.
This article uses material from the Wikipedia article Culm_(waste_coal), and is written by contributors.
Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.