A dive boat is a boat that recreational divers or professional scuba divers use to reach a dive site which they could not conveniently reach by swimming from the shore. Dive boats may be propelled by wind or muscle power, but are usually powered by internal combustion engines. Some features, like convenient access to the water, are common to all dive boats, while others depend on the specific application or region where they are used.
Dive boats may simply transport divers and their equipment to and from the dive site for a single dive, or may provide longer term support and shelter for day trips or periods of several consecutive days. Deployment of divers may be while moored, at anchor, or under way, (also known as live-boating or live-boat diving). There are a range of specialised procedures for boat diving, which include water entry and exit, avoiding injury by the dive boat, and keeping the dive boat crew aware of the location of the divers in the water.
There are also procedures used by the boat crew, to avoid injuring the divers in the water, keeping track of where they are during a dive, recalling the divers in an emergency, and ensuring that none are left behind.
The dive boat provides a means of transport to and from dive sites which may be too far or inconvenient for shore access. This is the case with the majority of recreational dive sites. It can also provide a base of operations where the divers can shelter, rest, store and change gear, socialise with other divers, eat and sleep between dives. They can provide enhanced safety, comfort and convenience, and provide guided access to sites of particular interest. They can also provide access to diving procedures which may be difficult, dangerous or impossible from the shore.
Dive boat features
Features that make a boat suitable for use by divers are:
- Sufficient space and stability to carry the divers and their equipment.:12-11
- Facilities for the divers to enter the water from the boat and board the boat from in the water.:12-11
Basic marine safety equipment for the class of vessel will be required by regional or national legislation, and diving specific safety equipment may also be carried as required by legislation or the diver certification agency to which the boat operator is affiliated. This will usually include:
Basic marine safety equipment:
- marine VHF radio
- small craft emergency equipment - life jackets, flares, fire extinguishers and other equipment according to the size and operating range of the boat
On larger boats additional diving support facilities may also be present:
- high pressure diving air compressor
- gas blending panel
- recompression chamber
- chase boat, or tender, to recover divers who surface away from the anchored vessel
If the freeboard of the boat is too high for the divers to climb back on board unaided, a ladder or other aid must be provided. Boarding aids range in cost, complexity, safety and ease of use, from a rope ladder, through rigid ladders and stairs with handrails, christmas tree ladders which allow the diver to climb while wearing fins, to temporary and fixed stern dive platforms, lifting platforms and passerelles.:12–13
Types of dive boat
- the basic dive boat
- the day boat
- the liveaboard
The structure, layout and size of a dive boat for any given application may vary considerably according to regional requirements and traditions, and convenience.
Basic dive boats
These are usually open boats used for short distance, or short duration, trips to dive sites, usually for a single dive or sometimes for a "two tank" trip, either with both dives at the same site, or with the second dive on the way back, or a short distance from the first. They generally have no amenities other than seating and stowage for dive gear, and the divers are usually exposed to wind, spray and sun during the trip. It is common for divers to kit up in their dive suits before boarding, for protection from the weather. It is unusual for the operator to provide refreshments other than bottled drinking water and an after-dive candy.
Rigid-hulled inflatable boat
Divers only spend a few hours at a time on these fast but exposed boats. The boats are usually relatively small so they can easily be transported on roads and launched at a convenient site depending on the weather. Boats of this size can be launched from slipways or through the surf on suitable beaches. The smaller models are suitable for recreational divers, as they can only transport a few divers. The larger boats can carry enough divers to be viable for professional use. These boats will generally carry basic safety equipment such as marine VHF radio, small boat safety gear, lifejackets and first aid oxygen administration equipment.
Space in the boat is limited, and divers generally travel and kit up while sitting on the tubes opposite a central cylinder rack where the fully rigged scuba sets are stowed. Water entry is commonly by simultaneous rolling backwards over the side, and return to the boat by climbing back in over the tubes one at a time after removing the heavy parts of the diving equipment and handing it up to the crew. Some boats have ladders which hook over the tubes to make boarding easier for the less athletic diver, others rely on assistance from the crew. An advantage of this type of boat compared with similar-sized rigid boats is that the inflated tubes make the boat very stable during the entry and exit of the divers and if the boat is filled with water during surf transit maneuvers. These boats are usually fairly fast, maneuverable, seaworthy in surf and rough conditions, and relatively uncomfortable. They seldom provide any shelter from the elements, and their advantages are that they get the diver to the site and back fairly quickly, are generally good for operation through surf, are usually trailerable and can be launched at slipways and beaches.
Open rigid hulled boats
These serve a similar function to the Rigid-hulled inflatable boats, but do not have inflatable tubes. They are more durable, but usually heavier for the same load capacity. In Australia and New Zealand the light aluminium "tinnie" is often used as a dive boat. These boats are usually less stable than the equivalent inflatable and are not as easy to climb back on board, but are light, durable and economical. Kayaks and canoes are occasionally used as dive boats for one or two divers, and are portable and paddled by the occupants.
These are usually relatively small and used only for short distances with a small number of divers. They are relatively uncomfortable, and not usually very fast, but are stable for their size and can be deflated, folded, and transported in a car or utility vehicle.
These boats are usually made of rigid materials - such as glass reinforced resin, plywood or aluminium. Day boats are generally relatively large: typically, between 60 to 90 feet (18 to 27 m) in length, as they must provide some comfort for the passengers for several hours. Many day boats are used for scuba-divers and also for other marine tourism activities such as fishing and whale-watching. In general, divers or passengers will spend only the daylight hours on a day boat, and do not sleep in them overnight. Dive boats which provide sleeping accommodation are generally referred to as "liveaboard" boats. Generally a professional crew operate the boat. The boat provides shelter from the weather and is likely to have various facilities such as a toilet (called the "head") and a small kitchen (called a "galley"), to cater for the guests and crew. Day-boats may have a saloon where divers can relax on upholstered benches, and one or more dining tables. Many day boats also have an uncovered sun-deck, and a shaded area, for divers wishing to be out in the open air. The boat will usually have a diving air compressor, oxygen first aid, a VHF radio, a GPS and possibly gas blending facilities. A day boat would generally be used to transport divers to multiple dive-sites (typically between one and three sites) during the same day, or multiple dives at the same site, with surface rest and refreshment periods between them.
The divers usually enter the water by stepping off a dive platform or the side of the boat, and return on board using a ladder or a lift. In some cases a smaller "tender" is used to carry divers to and from less accessible sites, and to rescue divers who are in difficulty or who drift away from the boat.
On these commercially operated boats, the divers live and sleep on board and dive from the boat for periods of a few days to several weeks. A professional crew navigate and operate the boat. In addition to the usual domestic facilities expected by hotel guests, the boat will have a diving air compressor and emergency oxygen. Some have gas blending facilities and a few even carry a recompression chamber.
The divers enter the water by stepping off a dive platform or the side of the main deck, and return to the boat using a ladder or a mechanical lift platform. Divers may also transfer to and from the dive site in a tender which is carried on, and launched from, the liveaboard boat.
- The lowest deck, which is for the engine and stores.
- The lower deck, which is all or mostly cabins for the passengers, usually two passengers per cabin.
- At the stern, a small diving deck with diving ladders.
- The main deck, which has the dining / social room, and crew bedrooms, the bridge, and open space.
- One or two upper decks.
Boats intended for other purposes can usually be used as dive platforms provided that there is reasonably convenient access to the water and enough space to carry the necessary equipment. Auxiliary sailing yachts and motor yachts are often used by their owners as dive boats, and catamarans can be particularly amenable to this function as they often have spacious decks and stern boarding facilities with swim ladders.
Diving from a boat
Stowage of dive gear
Trim and stability of small boats can be significantly influenced by where and how the dive gear is stowed. When transiting a surf line, or in other rough sea conditions, the movement of the boat can cause poorly secured equipment to move, which can directly injure the occupants, and adversely affect trim and stability, and thereby the safety of the vessel and its occupants. Dedicated dive boats usually provide cylinder racks to stow the scuba sets, and may also provide bins or racks to stow other heavy equipment. Larger vessels, particularly liveaboards, may also provide a camera table and fresh water rinsing facilities for washing gear after the dive.
Deployment of divers
Divers will usually enter the water with positive buoyancy, as this allows them to make final surface checks, signal to the boat that they are OK and co-ordinate descent with a buddy, but there are occasions when negative buoyancy entries are chosen to avoid excessive drift in a strong current, in which case all pre-dive checks must be done on the boat, the buoyancy compensator, and where applicable, the dry-suit emptied of gas, and the breathing apparatus function thoroughly checked before entering the water. The risk of injury if there is an equipment problem is greater for negative entry, particularly with breathing gas failures.
Several techniques are used for water entry from boats, depending on the layout of the vessel, particularly the freeboard at the entry points. Large dive boats often have a permanent or folding platform at the stern just above the water, intended to make water entry and exit safer and more convenient for divers. Such platforms will usually be provided with steps or ladders from the deck, and folding ladders into the water.
- Backward roll: The diver sits on the gunwale or RHIB tube facing into the boat, and falls in backwards. Suitable for open boats with low sides.:13–6
- Forward roll is suitable for boats with low deck freeboard and no gunwale or railing.
- Stride entry is suitable for boats with low or moderately low deck freeboard and no gunwale or railing at the entry point.
- Vertical drop is suitable for boats with moderate to high deck freeboard and no gunwale or railing at the entry point.:249
- Silent entry, suitable for boat with very low deck freeboard and no gunwale or railing.:251
- Ladder entry may be used where there is a ladder into the water. Ladders may be fixed, folding or portable, and may be designed for use with swimfins.
- Lifting platform entry: The diver/s stand on a platform fixed to the boat by the lifting mechanism, and are lowered a short distance into the water.
- Stage launch: The diver/s stand on a platform called a diving stage or basket, which can be lowered by a cable to a considerable distance below the surface.
Monitoring and escorting the divers
If there is no current, and the divers are visiting a small site and can surface on the shot-line or anchor line, keeping track is nominally simple if all goes to plan, as they will surface at a predictable position which is marked. This is not always the case, and for some dives they will surface away from the marker even when the plan is followed precisely. In other cases divers will not make it back to the shot-line and have to surface independently. If the dive boat is anchored and the plan is for the divers to ascend on the anchor line, it may be necessary to have a tender or chase boat available to follow and pick up divers surfacing off the mark.
- Spotting and recovering divers surfacing on their own decompression buoys
- Following a drift diving group
Recovery of divers
Divers may be picked up by a small tender or the dive boat may have a low enough freeboard for divers to climb over the side unaided, or with a bit of assistance from the crew. In this case it is usual to pass up heavy equipment such as weightbelts, and leave on the fins to help boost the diver out of the water. This is easiest with inflatable boats, particularly if provided with conveniently sited handles or ropes along the sides. For higher freeboards and easier boarding, mechanical aids may be provided:
- ladders may be provided for boarding from the water.:12-11It is easier to climb a standard ladder or stairs if fins are removed first. They can be handed up to an attendant on the boat, clipped to the diver's harness, or carried by sliding the fin straps over the forearm. Christmas tree ladders can be climbed with the fins on the feet.
- stern and side platforms:12–13 may be used in conjunction with ladders or low freeboard decks.
- lifting platforms (diver lifts)
- stages and baskets
Boat diving hazards
- Run down by boat (the dive boat or any other passing by)
- Cut by propeller (the dive boat or any other passing by)
- Left behind in the sea after dive
- Another diver landing on top during entry
- Falling overboard in transit
- Surfacing far away from boat and cannot be found.
- Surfacing away from an anchored boat and unable to swim back to it against wind or current.
Some boat diving activities require special procedures to reduce risk or enhance the diving experience.
Logging in and out
The risk of being left behind by the boat can be controlled by logging divers into and out of the water. If this is done by each diver only for themselves, there is little chance of confusion and error. In other protocols the skipper or divemaster is responsible for ensuring there is a name-list of all divers on board before leaving the shore, and that everyone on the list is back on the boat before leaving the dive site.
Use of personal marker
Surfacing at the shot-line, group surface marker, or personal marker buoy increases the visibility of a diver, and reduces the risk of not being noticed by a passing vessel. This will reduce the risks both of being run down and of being lost at the surface. It also provides an additional flotation device in case of fatigue.
Signalling the boat
Diving from an anchored boat
When using the anchor line to control ascents and descents, a "tag line" (or "lead line") may be used between the anchor line and the stern of the vessel, to allow secure transfer between these points in a current. A floating "drift line" (also "tag line", "current line" or "trail line") may be streamed from the stern or boarding platform to assist divers who drift astern of the vessel, and for something to hold onto while waiting to use the ladder. They can either hold onto the line and be pulled in by the crew, or pull themselves along the line. The far end of the line is usually marked with a brightly coloured buoy to show divers where it is and to help other boats avoid crossing the line. If there is any significant risk of a diver drifting away from the site, the dive boat should either be ready to slip the moorings at short notice, or have a tender in the water. Some skippers will tether the tender behind the dive boat where it can also be used as a drift line. A lazy shot or decompression trapeze may be suspended from the boat near the boarding area, and the drift line may be set up between this and the anchor line to guide decompressing divers ascending on the anchor line to the more convenient facility at the stern for the shallow stops.
Live-boating is diving from a boat which is not anchored.:13–7 There are increased risks due to the proximity of the divers to propellers when the engines are running, but there are also safety and convenience advantages to having the boat available to move at immediate notice, particularly in currents, as the boat can follow a group of drift divers, and pick up the divers from where they surface in most cases. Live boating is also used where anchoring is prohibited or impracticable.
When a significant amount of decompression is planned by several divers at a site where they can reasonably expect to surface on the shotline, they may consider deploying a decompression trapeze. This keeps the divers together where it is easier to monitor them and provide support for the last part of the dive.
Drift diving occurs when the divers allow themselves to be conveyed past the bottom by the prevailing current, minimising the effort required to cover a relatively large distance, but moving the divers away from the start position and making their surfacing position uncertain. The usual way of monitoring the position of a group is by the lead diver towing a surface marker buoy, and the divers of the group all following the dive leader. The dive boat follows the buoy at a distance where the lookouts can see if any diver surfaces near the buoy. Divers from the group either surface along the buoy line, or if there is current shear or they are separated from the group, deploy their own DSMB and surface on that. Groups of inexperienced divers may be escorted by a second divemaster who tries to keep them together, directs stragglers back to the dive leader, and keeps track of remaining gas. Divers may be formally grouped in buddy pairs, surfacing together when the first is low on gas, or more informally, and rely on the divemasters if they have a problem.
A major consideration of wreck diving is finding the wreck and getting the divers to the wreck with the minimum risk of getting lost. There are several methods for getting the divers to the wreck. The preferred method will depend on local conditions. In low visibility hooking onto the wreck is a reliable way of ensuring the divers will find it, but this procedure requires a wreck that is structurally suitable for snagging with a grapnel or anchor. A shotline which can be dropped off the wreckage is less likely to damage the wreck or become snagged and difficult to retrieve, but this requires appropriate visibility for the divers to be sure of finding the wreckage. When it is important to get back to the shotline for ascent, it may be tied to the wreckage by the first divers on site using a guide-line, which is retrieved by the last divers to leave. When there is a strong current, it may be necessary to drop in from up-current, a technique sometimes known as "parachuting in" or "free drop". The wreck may be first marked with a shotline, if this is considered useful or necessary. Divers may surface on the shotline, anchorline or personal DSMB depending on the conditions. When live-boating there are alternative methods for descent, including free drop and descent on the shotline.
An upline(or Jersey upline) may be used to limit drift during ascent. This is a fairly substantial natural fibre rope which is deployed from the bottom using a small lift bag to provide the equivalent of a shotline. The lower end is tied off to the bottom, usually on a wreck, and the diver ascends on the line to avoid being swept away from the site by currents. After reaching the surface, the last diver cuts the line and it sinks back down, Natural fibre is used so the line rots away over a few years.
Towing a diver
Occasionally a diver may be towed using a "sled", an unpowered device towed behind a surface vessel which conserves the diver's energy and allows more distance to be covered for a given air consumption and bottom time.:13–7 The depth is usually controlled by the diver by using diving planes or by tilting the whole sled. Some sleds are faired to reduce drag on the diver.
There are several ways to recall divers to the surface during a dive. Some are not universally known or immediately obvious, and the chances of them being understood correctly and responded to appropriately are increased if they are specified in the dive briefing.
- Pyrotechnic diver recall devices (Thunderflash) are small explosive devices calibrated to make sufficient noise to alert any divers in the vicinity without significant risk of injury to diver or environment. They have the advantages of being small, compact, and not easily confused with anything else likely to occur during the dive. They have disadvantages of a limited shelf life, and must be transported, stored, used and disposed of according to manufacturer's instructions and legal constraints.
- A surface marker buoy line may be used to signal to the diver below, either by pre-arranged pull signals, or by sending down a weight clipped to the line and carrying a message.
- Underwater loudspeaker and public address (PA) systems produce either a pre-programmed or microphone input sound signal.
- Revving the boat's engines is a popular but notoriously unreliable method, as few divers can distinguish between the sounds of the engines of their support boat and those of any other roughly similar vessel.
Lost diver procedures
There are three aspects to lost diver procedure:
- Lost buddy procedure, which is similar or identical to the procedure when diving from any other platform, until the diver notifies the boat that a diver is missing.
- Lost diver underwater, and
- Lost diver on the surface.
Generally, since the diver is lost, it is not known whether they are lost underwater or on the surface. Early notification that a diver is missing allows early starting of the search process. If the divers are notified of their expected behaviour during the dive briefing, the chances of timely notification of a problem are improved.
A dive boat will not be carrying a decompression chamber to treat a diver with decompression illness - that would normally classify it as a diving support vessel, so treatment would be limited to oxygen therapy with 100% oxygen, first aid emergency life support and transportation to the nearest suitable medical facility, or for operations where the equipment is available, and the risk is assessed as acceptable, technical or scientific divers may choose to do in-water recompression.
Operating a dive boat
The person in command of a dive boat is generally referred to as the skipper. In most cases the boat is fairly small and will not require many crew members. It is not unusual for the skipper to be the only crew member. There may be national legislation requiring a certificate of competency or license from the person in command of a dive boat. This will generally depend on whether the boat is operated for profit, how many passengers it is licensed to carry and how far offshore it is licensed to operate.
- Staff. "Your basic guide to DAN Safety Partners" (PDF). DSP Guide and Application. Divers Alert Network Southern Africa. Retrieved 12 January 2017.
- Clinchy, Richard A.; Egstrom, Glen H. (1993). "5: Boat diving". In Richard A. Clinchy (ed.). Jeppesen's Advanced Sport Diver Manual (Illustrated ed.). Jones and Bartlett Learning. pp. 91–. ISBN 9780801690310.
- NOAA Diving Program (U.S.) (28 Feb 2001). Joiner, James T. (ed.). NOAA Diving Manual, Diving for Science and Technology (4th ed.). Silver Spring, Maryland: National Oceanic and Atmospheric Administration, Office of Oceanic and Atmospheric Research, National Undersea Research Program. ISBN 978-0-941332-70-5. CD-ROM prepared and distributed by the National Technical Information Service (NTIS) in partnership with NOAA and Best Publishing Company
- Busuttili, Mike; Holbrook, Mike; Ridley, Gordon; Todd, Mike, eds. (1985). "Entry to the water". Sport diving – The British Sub-Aqua Club Diving Manual. London: Stanley Paul & Co Ltd. p. 124. ISBN 978-0-09-163831-3.
- Francis, John (August 2003). "Kayak diving". How to Scuba Dive. Scuba Diving magazine. Retrieved 5 January 2017.
- Gilliam, Bret (1992). "Evaluation of decompression sickness incidence in multi-day repetitive diving for 77,680 sport dives". Journal of the South Pacific Underwater Medicine Society. 22 (1). Retrieved 2014-02-10.
- NOAA Diving Program (U.S.) (December 1979). "13: Surface support platforms". In Miller, James W. (ed.). NOAA Diving Manual, Diving for Science and Technology (2nd ed.). Silver Spring, Maryland: US Department of Commerce: National Oceanic and Atmospheric Administration, Office of Ocean Engineering.
- Campbell, Jamie (20 August 2010). "Drift Diving: Flying Underwater". Scuba diving. Diver Daily. Retrieved 5 January 2017.
- Jonker, Kate (22 April 2014). "How to Perform a Negative Entry Like a Pro". www.indigoscuba.com. Indigo Scuba. Retrieved 5 January 2017.
- British Sub-Aqua Club members (1982). British Sub-Aqua Club Diving Manual (10th ed.). Ellesmere Port, Cheshire: British Sub-Aqua Club. p. 567. ISBN 978-0950678610.
- Knight, Marcus (10 August 2019). "Training Fundamentals: Diver Lifts". scubadiverlife.com. Retrieved 11 August 2019.
- Senger, Thomas Grønfeldt. "Drift Diving 101: All you need to know about Drift Diving". DIVE.in: Guides. www.divein.com. Retrieved 5 January 2017.
- Hanekom, Paul; Truter, Pieter (February 2007). Diver Training Handbook (3rd ed.). Cape Town, South Africa: Research Diving Unit, University of Cape Town.
- Staff. "Lost Diver Procedure Guidelines" (PDF). Dive Safety Partners. Retrieved 4 January 2017.
- Staff. "Headcount Procedures". Diving Safety Partner documents. DAN Europe. Retrieved 5 January 2017.
- Wallbank, Alister; Bullen, Colin; Daniels, Carol; Chilton, Bill; Side, Jon. "Diver Location Aids: HSE Report" (PDF). Health and Safety Executive. Retrieved 5 January 2017.
- Citelli, Joe (August 2008). "24: The practical aspects of deep wreck diving". In Mount, Tom; Dituri, Joseph (eds.). Exploration and Mixed Gas Diving Encyclopedia (1st ed.). Miami Shores, Florida: International Association of Nitrox Divers. pp. 279–286. ISBN 978-0-915539-10-9.
- Gurr, Kevin (August 2008). "13: Operational Safety". In Mount, Tom; Dituri, Joseph (eds.). Exploration and Mixed Gas Diving Encyclopedia (1st ed.). Miami Shores, Florida: International Association of Nitrox Divers. pp. 165–180. ISBN 978-0-915539-10-9.
- Dituri, Joseph (August 2008). "23: Expeditions - Wrecks". In Mount, Tom; Dituri, Joseph (eds.). Exploration and Mixed Gas Diving Encyclopedia (1st ed.). Miami Shores, Florida: International Association of Nitrox Divers. pp. 273–278. ISBN 978-0-915539-10-9.
- Berg, Dan. "Scuba Wreck Diving Equipment". www.shipwreckexpo.com. Retrieved 25 October 2017.
- Sigl, Walter; Von Rad, Ulrich; Oeltzschner, Hansjörg; Braune, Karl; Fabricius, Frank (August 1969). "Diving sled: A tool to increase the efficiency of underwater mapping by scuba divers". Marine Geology. Elsevier. 7 (4): 357–363. doi:10.1016/0025-3227(69)90031-0.
- Staff (2012). "TOAD Sled Underwater Habitat Mapping Vehicle". Foreshore Technologies Inc. Retrieved 27 March 2016.
- Staff (2015). "BSAC Safe Diving". Ellesmere Port, Cheshire: British Sub-Aqua Club. Retrieved 6 March 2016.
- Staff. "Diver Recall Device" (PDF). www.australian-munitions.com.au. Sydney, New South Wales: Australian Munitions. Retrieved 4 January 2017.
- Staff. "Acoustic Diver Recall Systems". North Canton, Ohio: Oceanears. Retrieved 4 January 2017.
- Staff (November 2005). "Lost or missing diver(s) – Boat dive (Appendix B)" (PDF). Emergency procedure. Scuba Divers Federation of South Australia. Retrieved 5 January 2017.
- Longphre, J. M.; DeNoble, P. J.; Moon, R. E.; Vann, R. D.; Freiberger, J. J. (2007). "First aid normobaric oxygen for the treatment of recreational diving injuries". Undersea and Hyperbaric Medicine. 34 (1): 43–9. ISSN 1066-2936. OCLC 26915585. PMID 17393938. Retrieved 8 June 2008.
- Pyle, R. L. (1997). "In-water Recompression (Letter to Editor)". South Pacific Underwater Medicine Society Journal. 27 (3). ISSN 0813-1988. OCLC 16986801. Retrieved 8 June 2008.
- Kay, E.; Spencer, M. P. (1999). In water recompression. 48th Undersea and Hyperbaric Medical Society Workshop. UHMS Publication Number RC103.C3. United States: Undersea and Hyperbaric Medical Society. p. 108. Retrieved 8 June 2008.
- Pyle, R. L.; Youngblood, D. A. (1995). "In-water Recompression as an emergency field treatment of decompression illness". AquaCorp. 11. Retrieved 8 June 2008.