Type 352 Ensdorf-class minesweepers are a class of five minesweepers of the German Navy. They are Type 343 Hameln-class minesweepers that have been upgraded with the Troika Plus system of minesweeping drones

This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations. (February 2013)

Quick Facts Class overview, General characteristics ...

M1098 Siegburg, at the Kiel Week 2007
Class overview
Name	Type 352 Ensdorf class
Builders	Lürssen Abeking & Rasmussen
Operators	German Navy
Preceded by	Hameln class
Built	1999-2001
Completed	5
Laid up	5
General characteristics
Type	Minesweeper
Displacement	650 tonnes
Length	54.40 m (178.5 ft)
Beam	9.20 m (30.2 ft)
Draft	2.84 m (9 ft 4 in)
Propulsion	2 × MTU 16V 538 TB91 diesel engines, 2240 kW each 2 × Renk PLS 25 gearboxes 2 × propeller shafts driving controllable pitch propellers
Speed	18 knots (33 km/h; 21 mph)
Complement	45
Sensors and processing systems	Navigation radar Hull-mounted DSQS-11 mine-detection sonar
Armament	2 × Bofors 40mm/L70 dual-purpose gun (to be upgraded to 2 Mauser MLG27 27 mm remote-controlled autocannons) FIM-92 Stinger surface-to-air missiles (MANPADS) Mine-laying capabilities (60 mines)

Close

The Ensdorf class have three modes to clear mine fields:

• Troika Plus: This system employs up to four remote controlled Seehund ("seal") drones which perform the sweep. The drones are small unmanned boats that can simulate the acoustic and magnetic signatures of bigger ships to trigger mines. Their small size and special construction let them survive the effects of exploding mines unharmed.
• Mine hunting: Mines detected with the hull-mounted sonar can be identified and exploded with expendable Seefuchs (Seafox) ROVs.
• Classical minesweeping: Against moored mines the classical minesweeping using towed wire cutters to cut the anchors of mines can be conducted.

The Ensdorf class replaced the Type 351 Lindau-class minesweepers in service with the German Navy.