Originally, the B platform was used for Buick and Oldsmobile products, with the A platform for Chevrolet and Oakland, and the C and D platforms devoted to Cadillac. During the General Motors companion make program, Vikings and Marquettes were also manufactured on this platform, as were La Salles from 1936 to 1940. The B platform became GM's base model platform in 1958, when all existing Chevrolet products were upgraded to the B platform.
For the 1959 model year, the previous A- and B-bodies were built on the new B platform[2][3] that lasted until 1996. During this period, the B was the most modest of GM's three full-sized platforms, slotting below the upscale C and the luxury D. The A platform designation would be resurrected by GM in 1964 for a new series of intermediate-sized cars including the Chevrolet Chevelle, Pontiac Tempest, Oldsmobile Cutlass, and Buick Skylark.
History
The GM B platform was introduced in 1926 with the Buick Master Six, and the Oldsmobile Model 30, and had at least 12 major re-engineering and restyling efforts, for the 1937, 1939, 1941, 1949, 1954, 1957, 1959, 1961, 1965, 1971, 1977, and 1991 model years; along with interim styling changes for 1942, 1969, and 1980 that included new sheetmetal and revised rooflines. The platform was downsized in length by approximately 10inches in 1977 and reduced in weight by an average of 800 pounds.
In 1991, the platform received its last major redesign, regaining several inches in length and featuring numerous frame improvements and reinforcements, while the shorter wheelbase remained unchanged. The last B-cars rolled off the line in 1996, leaving only Ford producing domestic large rear-wheel-drive sedans until the line was phased out in late 2011, with Chrysler reentering the market with their LX platform in 2005.
Known for being durable and reliable, most B-platform cars used suspensions utilizing coil springs in the front and leaf springs in the rear until 1958, when they switched to coils in the rear; one exception is the 1959–60 Oldsmobile 88, which used coil springs in front and multi-leaf springs in the rear. All B-platform cars since 1965 used perimeter frames with side rails, along with the 1961–64 B-platform Pontiacs and Oldsmobiles. The 1958–60 Buicks and 1959–60 Oldsmobiles used a ladder-type frame, while an X-frame without side rails was used on 1959–60 Pontiacs, 1959–64 Chevrolets, and 1961–64 Buicks.
The B platform was the last platform design to have the gasoline tank filler port behind the license plate after 1958. Exceptions included all station wagons, as well as all 1961–64 cars (which had the tank filler in the rear fender on the driver's side) and 1965 Buicks (which had their fuel filler door above the license plate). Also, the B-platform vehicles from Pontiac, Oldsmobile, and Buick from 1941 to 1948 had the fuel filler door in the rear fender on the driver's side.
There are some corporate things we're going to drive; we are a front-drive corporation.
He also stated that the rear-wheel-drive 1992 Buick Roadmaster and Chevrolet Caprice had been produced "over my dead body."[4] No successor for this platform was made after 1996, when the Roadmaster and Caprice ceased production. However, the Caprice would be revived and built on the Opel-developed V platform for the Middle East but built by Holden, while years later, the Caprice for police use along with the Impala SS successor, the Chevrolet SS, would return to the United States, built on the GM Zeta platform developed by Holden in Australia.
This article uses material from the Wikipedia article GM_B_platform, and is written by contributors.
Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.