The Gribeauval system (French: système Gribeauval) was an artillery system introduced by Lieutenant General Jean Baptiste Vaquette de Gribeauval during the 18th century. This system revolutionized French cannons, with a new production system that allowed lighter, more uniform guns without sacrificing range. The Gribeauval system superseded the Vallière system beginning in 1765. The new guns contributed to French military victories during the French Revolutionary Wars and Napoleonic Wars. The system included improvements to cannons, howitzers, and mortars. The Year XI system partly replaced the field guns in 1803 and the Valée system completely superseded the Gribeauval system in 1829.

Quick Facts Type, Place of origin ...

Gribeauval system
Gribeauval system field artillery gun barrels are shown. From left to right, they are 12-, 8-, and 4-pounders.
Type	Artillery
Place of origin	Kingdom of France First French Republic First French Empire
Service history
In service	1765–1829
Used by	France, French satellites
Wars	American Revolutionary War French Revolutionary Wars Napoleonic Wars
Production history
Designer	Jean Baptiste Vaquette de Gribeauval
Designed	15 October 1765

Close

The mid-18th Century saw the development of mobile field artillery. Ballistics engineers and metallurgy technicians introduced reforms that lowered the weight of gun tubes while other experts devised lighter gun carriages. Gun calibers were standardized, easing the logistical headache caused by a multitude of calibers. Gribeauval was a veteran combat officer and an able artillery theoretician. With the advent of the Gribeauval system, the French enjoyed the best artillery in Europe.^[1] One historian called it "arguably the best artillery system in Europe at that time".^[2]

Benjamin Robins put artillery on a scientific basis in 1742. Bronze – an alloy of 10 parts copper to one part tin – was preferred for cannons because it was lighter than iron and more durable. At that time, cannons were cast hollow around a core and the core often moved within the mold, producing an imperfect bore. This problem was solved at The Hague foundry in 1747.^[3] Jean Maritz began casting guns as a single, solid block, and then drilling the bore on a large machine.^[4] The Dutch tried to maintain the secret, but the new process soon became widely known in Europe. After Maritz's invention, a cannon could be manufactured with a better-aligned bore and tighter tolerances. This resulted in less windage – the gap between the cannonball and the bore – which meant less gas pressure escaped, so that smaller gunpowder charges could hurl the projectile farther and more accurately. When less gunpowder could be used to achieve the same power and range, the ballistics experts found that cannon barrels could be made thinner, shorter, and lighter.^[3]

The army of the Habsburg monarchy discovered that its artillery was outmatched by Prussian cannons during the War of the Austrian Succession. In 1744, the new Director General Joseph Wenzel I, Prince of Liechtenstein began a series of reforms to improve the design of Austria's field artillery and provide training to its gunners. By the start of the Seven Years' War the Austrians upgraded their artillery with lighter cannons and introduced a very good howitzer. These were so successful that other nations rushed to manufacture similar weapons. Gribeauval, who served in the Austrian artillery in 1756–1762, got a first-hand look at the new field guns. Upon his return to France, Gribeauval was requested to reorganize the artillery.^[5]

France already possessed the only unified range of artillery in Europe. Earlier, Florent-Jean de Valliere standardized guns from 4-pounders through 24-pounders, though they were all very heavy.^[6] The Gribeauval system was introduced through royal order on 15 October 1765.^[7] The new system was strenuously resisted by Vallière's son, Joseph Florent de Vallière and other officers. Because of their opposition, the Gribeauval system was not completely implemented until 1776.^[8] The 1-pounder Rostaing gun and the Swedish 4-pounder battalion guns were retained from the previous system.^[4]

Gribeauval's reforms encompassed not only the cannons, but the gun carriages, limbers, ammunition chests, and the accompanying tools.^[5] The system's field guns included 4-, 8-, and 12-pounder cannons and 6- and 8-inch howitzers. The gun barrels were cast shorter and thinner, while gun carriages were built lighter and narrower. These improvements dramatically reduced the weight of an artillery piece. The carriages were standardized and built with interchangeable parts. The carriages had two positions for the trunnions, a forward position for firing and a rear position for traveling. The draft horses were harnessed in pairs, rather than single file. The guns were fitted with a rear calibrated gunsight and an elevating screw.^[8] The last two improvements allowed gunners to more easily aim the cannons.^[9]

The new system incorporated other innovations that were widely shared in Europe. One was the quick-match tube which generated a better ignition of the gunpowder charge. Other general improvements were the adoption of gunpowder charges in pre-packaged flannel bags, a more effective gunpowder mixture, and the use of a vent-pricker – a special tool to make a hole in the gunpowder bags. Around 1791, French chemist Nicholas Leblanc invented a process to manufacture soda ash, allowing to more cheaply convert calcium nitrate from guano to saltpeter, a necessary ingredient of gunpowder.^[9] Finally, since better gunners were needed to operate the new field pieces, France set up artillery schools to train its soldiers.^[10]

In the early years of the French Revolutionary Wars, the artillery arm lost the fewest officers by emigration. That was because many of its officers came from middle-class instead of aristocratic families. Thanks to the Gribeauval system, the French field artillery was Europe's finest. The artillerists had to rely on hired civilian drivers and horses to carry their guns into battle. This problem was not rectified until shortly after 1800, when the drivers became soldiers.^[27] At the Battle of Jemappes in 1792, the French superiority in artillery contributed to the victory. The commanding general Charles François Dumouriez remarked that French soldiers were more impetuous when their guns dominated the enemy, and that when the artillery was not successful, the infantry hung back. Historian Ramsay Weston Phipps noted that the French artillery in the War of the First Coalition was "excellent" and helped overcome some of the failings of the new armies.^[28] After the Battle of Wattignies in 1793, one Allied observer wrote that the French victory was due to "their immense artillery".^[29]

For his expert handling of the artillery at the Siege of Toulon in 1793, Napoleon Bonaparte was promoted to general of brigade and began his climb to fame and political power.^[30] When Napoleon became First Consul and later emperor, he appointed Auguste de Marmont to carry out most of his artillery improvements. Already in 1800, there were eight foot and six horse artillery regiments, two sapper battalions, and eight battalions of artillery train soldiers, for a total of 28,000 gunners, sappers, and drivers.^[31] At first, each infantry unit was allocated some 4-pounders, the so-called regimental artillery. These were suppressed in 1800 but reinstated in 1809 as the infantry declined in quality.^[32] Napoleon decided to replace the 4-pounders with 6-pounders in order to increase his artillery's hitting power.^[12] This would utilize the large number of 6-pounders captured from Austria and Prussia in 1794–1800.^[32]

From 1805, the Year XI system started to replace the captured ordnance. Gradually, the Gribeauval 4- and 8-pounders began to be replaced by the Year XI 6-pounder and the Gribeauval 6-pouce (6.4-inch) howitzer was replaced by the Year XI 24-pounder howitzer. In 1808, due to financial considerations, the old Gribeauval carriages were cannibalised to create new carriages for the Year XI gun tubes.^[33] During this period, many Gribeauval 4- and 8-pounders were withdrawn into arsenals. However, the 8-pounder continued to be used in Spain since the terrain was not suitable for the heavier 12-pounder.^[34] The new Year XI 6-pounder was rushed into production, but it ultimately proved to be too fragile.^[35] In 1810 a commission headed by Nicolas-Marie Songis des Courbons determined that the Year XI system should be discontinued and the Gribeauval system retained, but that a new 6-pounder should be introduced. Under the Bourbon Restoration in 1815, the 4- and 8-pounders were brought back into service and the new 6-pounders withdrawn based on a survey carried out by Charles-Étienne-François Ruty.^[34]

In 1829, the Gribeauval system was replaced by the Valée system which was developed by Sylvain Charles Valée. The new system reduced the calibers of field artillery to 8- and 12-pound cannons and 24-pound and 6-inch howitzers. Mobility was increased by standardizing limbers so that 8-pounders and 24-pound howitzers used the smaller size while 12-pounders and 6-inch howitzers used the larger size. Gunners rode into action while sitting on the limbers rather than walking beside the guns. All batteries were armed with four cannons and two howitzers.^[36]