The Highland Railway P class was a group of five 4-4-0T steam locomotives built in 1891 and 1893 by Dübs and Company of Glasgow.

This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations. (December 2014)

Quick Facts Type and origin, Power type ...

Highland Railway P class
Type and origin Power type Steam Builder Dübs & Co. Serial number 2778–2779, 3077–3079 Build date 1891 (2), 1893 (3) Total produced 5
Specifications Configuration: ​  • Whyte 4-4-0T  • UIC 2′B n2t Gauge 4 ft 8+1⁄2 in (1,435 mm) Leading dia. 3 ft 0 in (914 mm) Driver dia. 5 ft 3 in (1,600 mm) Loco weight 1891 locos: 41 long tons 12 cwt (93,200 lb or 42.3 t), 1893 locos: 44 long tons 0 cwt (98,600 lb or 44.7 t) Boiler 3 ft 10 in (1.17 m) inside diameter Boiler pressure 140 lbf/in2 (0.97 MPa) Heating surface 883 sq ft (82.0 m2) Cylinders Two, outside Cylinder size 16 in × 22 in (406 mm × 559 mm) Valve gear Stephenson
Performance figures Tractive effort 10,638 lbf (47.32 kN)
Career Operators Highland Railway → London, Midland & Scottish Class HR: P (from 1901) Power class LMS: Unclassified Numbers LMS: 15013–15017 Nicknames Yankee Tanks Withdrawn 1924–1934

Close

In 1891 Dübs and Company of Glasgow completed two 4-4-0T locomotives. They were part of an order for five for the Uruguay Eastern Railway, but due to financial problems the order was cancelled and the engines were offered for sale.

The locomotives were purchased by the Highland Railway in 1892, where they were numbered 101 and 102. Although their cowcatchers and large headlights were removed before entering service, they retained a somewhat American appearance quite unlike other HR designs of the period, lacking the classic Allan framing and sweep of plating from the widest part of the smokebox to the cylinders. They were nicknamed Yankees, although the official designation from 1901 was 'P' Class.

Three further locomotives were delivered by Dübs in 1893, possibly comprising the balance of the Uruguay order. These had standard Highland Railway fittings but were otherwise identical to the first two. They were originally numbered 11, 14 and 15, but were renumbered 51, 50 and 52 in 1899–1900, and 50 was again renumbered to 54 in 1901.

The locomotives had 5 ft 3 in (1,600 mm) driving wheels and 16 in × 22 in (406 mm × 559 mm) outside cylinders. Boiler pressure was 140 lbf/in² (970 kPa) and weight in working order was 41 long tons 12 cwt (93,200 lb or 42.3 t).

They were used on branch line services, including those to Burghead, Fortrose, Portessie and Aberfeldy. One (no. 52) was used on the Invergarry and Fort Augustus Railway while that line was leased to the Highland.

In 1923 they passed to the London, Midland and Scottish Railway (LMS) and became LMS 15013–15017. They were withdrawn between 1924 and 1934.