Isopropyl_alcohol

Isopropyl alcohol

Isopropyl alcohol

Simplest secondary alcohol

Quick Facts Names, Identifiers ...

Isopropyl alcohol (IUPAC name propan-2-ol and also called isopropanol or 2-propanol) is a colorless, flammable organic compound with a pungent alcoholic odor.[9]

Isopropyl alcohol, an organic polar molecule, is miscible in water, ethanol, and chloroform, demonstrating its ability to dissolve a wide range of substances including ethyl cellulose, polyvinyl butyral, oils, alkaloids, and natural resins. Notably, it is not miscible with salt solutions and can be separated by adding sodium chloride in a process known as salting out. It forms an azeotrope with water, resulting in a boiling point of 80.37 °C and is characterized by its slightly bitter taste. Isopropyl alcohol becomes viscous at lower temperatures, freezing at −89.5 °C, and has significant ultraviolet-visible absorbance at 205 nm. Chemically, it can be oxidized to acetone or undergo various reactions to form compounds like isopropoxides or aluminium isopropoxide. As an isopropyl group linked to a hydroxyl group (chemical formula (CH3)2CHOH) it is the simplest example of a secondary alcohol, where the alcohol carbon atom is attached to two other carbon atoms. It is a structural isomer of propan-1-ol and ethyl methyl ether. They all have the formula C3H8O.

It was first synthesized in 1853 by Alexander William Williamson and later produced for cordite preparation. It is produced through hydration of propene or hydrogenation of acetone, with modern processes achieving anhydrous alcohol through azeotropic distillation. Beyond its production, isopropyl alcohol serves in medical settings as a rubbing alcohol and hand sanitizer, and in industrial and household applications as a solvent. It is a common ingredient in products such as antiseptics, disinfectants and detergents. More than a million tonnes are produced worldwide annually. Despite its utility, isopropyl alcohol poses safety risks due to its flammability and potential for peroxide formation. Its ingestion or absorption leads to toxic effects including central nervous system depression and coma, primarily treated through supportive measures.

Properties

Isopropyl alcohol is miscible in water, ethanol, and chloroform, as it is an organic polar molecule. It dissolves ethyl cellulose, polyvinyl butyral, many oils, alkaloids, and natural resins.[10] Unlike ethanol or methanol, isopropyl alcohol is not miscible with salt solutions and can be separated from aqueous solutions by adding a salt such as sodium chloride. The process is colloquially called salting out, and causes concentrated isopropyl alcohol to separate into a distinct layer.[11]

Isopropyl alcohol forms an azeotrope with water, which gives a boiling point of 80.37 °C (176.67 °F) and a composition of 87.7% by mass (91% by volume) isopropyl alcohol. It has a slightly bitter taste, and is not safe to drink.[11][12]

Isopropyl alcohol becomes increasingly viscous with decreasing temperature and freezes at −89.5 °C (−129.1 °F).[9] Mixtures with water have higher freezing points: 99% at −89.5 °C (−129.1 °F), 91% (the azeotrope) at −75.5 °C (−103.9 °F), and 70% at −61.7 °C (−79.1 °F).[13]

Isopropyl alcohol has a maximal absorbance at 205 nm in an ultraviolet-visible spectrum.[14][15]

Reactions

Isopropyl alcohol can be oxidized to acetone, which is the corresponding ketone. This can be achieved using oxidizing agents such as chromic acid, or by dehydrogenation of isopropyl alcohol over a heated copper catalyst:

(CH3)2CHOH → (CH3)2CO + H2

Isopropyl alcohol is often used as both solvent and hydride source in the Meerwein-Ponndorf-Verley reduction and other transfer hydrogenation reactions. Isopropyl alcohol may be converted to 2-bromopropane using phosphorus tribromide, or dehydrated to propene by heating with sulfuric acid.

Like most alcohols, isopropyl alcohol reacts with active metals such as potassium to form alkoxides that are called isopropoxides. With titanium tetrachloride, isopropyl alcohol reacts to give titanium isopropoxide:

TiCl4 + 4 (CH3)2CHOH → Ti(OCH(CH3)2)4 + 4 HCl

This and similar reactions are often conducted in the presence of base.

The reaction with aluminium is initiated by a trace of mercury to give aluminium isopropoxide.[16]

History

Isopropyl alcohol was first synthesized by the chemist Alexander William Williamson in 1853. He achieved this by heating a mixture of propene and sulfuric acid. Standard Oil produced isopropyl alcohol by hydrating propene. Isopropyl alcohol was oxidized to acetone for the preparation of cordite, a smokeless, low explosive propellant.[17]

Production

In 1994, 1.5 million tonnes of isopropyl alcohol were produced in the United States, Europe, and Japan.[18] It is primarily produced by combining water and propene in a hydration reaction or by hydrogenating acetone.[18][19] There are two routes for the hydration process and both processes require that the isopropyl alcohol be separated from water and other by-products by distillation. Isopropyl alcohol and water form an azeotrope, and simple distillation gives a material that is 87.9% by mass isopropyl alcohol and 12.1% by mass water.[20] Pure (anhydrous) isopropyl alcohol is made by azeotropic distillation of the wet isopropyl alcohol using either diisopropyl ether or cyclohexane as azeotroping agents.[18]

Biological

Small amounts of isopropyl alcohol are produced in the body in diabetic ketoacidosis.[21]

Indirect hydration

Indirect hydration reacts propene with sulfuric acid to form a mixture of sulfate esters. This process can use low-quality propene, and is predominant in the USA. These processes give primarily isopropyl alcohol rather than 1-propanol, because adding water or sulfuric acid to propene follows Markovnikov's rule. Subsequent hydrolysis of these esters by steam produces isopropyl alcohol, by distillation. Diisopropyl ether is a significant by-product of this process; it is recycled back to the process and hydrolyzed to give the desired product.[18]

CH3CH=CH2 + H2O H2SO4→ (CH3)2CHOH

Direct hydration

See also: Heteropoly acid

Direct hydration reacts propene and water, either in gas or liquid phase, at high pressures in the presence of solid or supported acidic catalysts. This type of process usually requires higher-purity propylene (> 90%).[18] Direct hydration is more commonly used in Europe.

Hydrogenation of acetone

Isopropyl alcohol can be prepared via the hydrogenation of acetone; however, this approach involves an extra step compared to the above methods, as acetone is itself normally prepared from propene via the cumene process.[18] IPA cost is primarily driven by raw material (acetone or propylene) cost. A known issue is the formation of MIBK and other self-condensation products. Raney nickel was one of the original industrial catalysts, modern catalysts are often supported bimetallic materials.

Uses

One of the small scale uses of isopropanol is in cloud chambers. Isopropanol has ideal physical and chemical properties to form a supersaturated layer of vapor which can be condensed by particles of radiation.

In 1990, 45,000 metric tonnes of isopropyl alcohol were used in the United States, mostly as a solvent for coatings or for industrial processes. In that year, 5400 metric tonnes were used for household purposes and in personal care products. Isopropyl alcohol is popular in particular for pharmaceutical applications,[18] due to its low toxicity. Some isopropyl alcohol is used as a chemical intermediate. Isopropyl alcohol may be converted to acetone, but the cumene process is more significant.[18]

Solvent

Isopropyl alcohol dissolves a wide range of non-polar compounds. It evaporates quickly and the typically available grades tend to not leave behind oil traces when used as a cleaning fluid unlike some other common solvents. It is also relatively non-toxic. Thus, it is used widely as a solvent and as a cleaning fluid, especially where there are oils or oil based residues which are not easily cleaned with water, conveniently evaporating and (depending on water content and other variables) posing less of a risk of corrosion or rusting than plain water. Together with ethanol, n-butanol, and methanol, it belongs to the group of alcohol solvents.

Isopropyl alcohol is commonly used for cleaning eyeglasses, electrical contacts, audio or video tape heads, DVD and other optical disc lenses, bongs,[22] removing thermal paste from heatsinks on CPUs[23] and other IC packages.

Intermediate

Isopropyl alcohol is esterified to give isopropyl acetate, another solvent. It reacts with carbon disulfide and sodium hydroxide to give sodium isopropylxanthate, a herbicide and an ore flotation reagent.[24] Isopropyl alcohol reacts with titanium tetrachloride and aluminium metal to give titanium and aluminium isopropoxides, respectively, the former a catalyst, and the latter a chemical reagent.[18] This compound may serve as a chemical reagent in itself, by acting as a dihydrogen donor in transfer hydrogenation.

Medical

Rubbing alcohol, hand sanitizer, and disinfecting pads typically contain a 60–70% solution of isopropyl alcohol or ethanol in water. Water is required to open up membrane pores of bacteria, which acts as a gateway for isopropyl alcohol. A 75% v/v solution in water may be used as a hand sanitizer.[25] Isopropyl alcohol is used as a water-drying aid for the prevention of otitis externa, better known as swimmer's ear.[26]

Inhaled isopropyl alcohol can be used for treating nausea in some settings by placing a disinfecting pad under the nose.[27]

Early uses as an anesthetic

Although isopropyl alcohol can be used for anesthesia, its many negative attributes or drawbacks prohibit this use. Isopropyl alcohol can also be used similarly to ether as a solvent[28] or as an anesthetic by inhaling the fumes or orally. Early uses included using the solvent as general anesthetic for small mammals[29] and rodents by scientists and some veterinarians. However, it was soon discontinued, as many complications arose, including respiratory irritation, internal bleeding, and visual and hearing problems. In rare cases, respiratory failure leading to death in animals was observed.

Automotive

Isopropyl alcohol is a major ingredient in "gas dryer" fuel additives. In significant quantities, water is a problem in fuel tanks, as it separates from gasoline and can freeze in the supply lines at low temperatures. Alcohol does not remove water from gasoline, but the alcohol solubilizes water in gasoline. Once soluble, water does not pose the same risk as insoluble water, as it no longer accumulates in the supply lines and freezes but is dissolved within the fuel itself. Isopropyl alcohol is often sold in aerosol cans as a windshield or door lock deicer. Isopropyl alcohol is also used to remove brake fluid traces from hydraulic braking systems, so that the brake fluid (usually DOT 3, DOT 4, or mineral oil) does not contaminate the brake pads and cause poor braking. Mixtures of isopropyl alcohol and water are also commonly used in homemade windshield washer fluid.

Laboratory

As a biological specimen preservative, isopropyl alcohol provides a comparatively non-toxic alternative to formaldehyde and other synthetic preservatives. Isopropyl alcohol solutions of 70–99% are used to preserve specimens.

Isopropyl alcohol is often used in DNA extraction. A lab worker adds it to a DNA solution to precipitate the DNA, which then forms a pellet after centrifugation. This is possible because DNA is insoluble in isopropyl alcohol.

Semiconductors

Isopropyl alcohol is used as an additive in alkaline anisotropic etching of monocrystalline silicon, such as with potassium hydroxide or tetramethylammonium hydroxide. This process is used in texturing of silicon solar cells and microfabrication (e.g. in MEMS devices). Isopropyl alcohol increases the anisotropy of the etch by increasing the etch rate of [100] plane relative to higher indexed planes.[30]

Safety

Isopropyl alcohol vapor is denser than air and is flammable, with a flammability range of between 2 and 12.7% in air. It should be kept away from heat, sparks, and open flame.[31] Distillation of isopropyl alcohol over magnesium has been reported to form peroxides, which may explode upon concentration.[32][33] Isopropyl alcohol can react with air and oxygen over time to form unstable peroxides that can explode.[34]

Toxicology

Isopropyl alcohol, via its metabolites, is somewhat more toxic than ethanol, but considerably less toxic than ethylene glycol or methanol. Death from ingestion or absorption of even relatively large quantities is rare. Both isopropyl alcohol and its metabolite, acetone, act as central nervous system (CNS) depressants.[35] Poisoning can occur from ingestion, inhalation, or skin absorption.[36] Symptoms of isopropyl alcohol poisoning include flushing, headache, dizziness, CNS depression, nausea, vomiting, anesthesia, hypothermia, low blood pressure, shock, respiratory depression, and coma.[35] Overdoses may cause a fruity odor on the breath as a result of its metabolism to acetone.[37] Isopropyl alcohol does not cause an anion gap acidosis, but it produces an osmolal gap between the calculated and measured osmolalities of serum, as do the other alcohols.[35] The findings of acetone without acidosis leads to the sine qua non of "ketosis without acidosis."

Isopropyl alcohol is oxidized to form acetone by alcohol dehydrogenase in the liver[35] and has a biological half-life in humans between 2.5 and 8.0 hours.[35] Unlike methanol or ethylene glycol poisoning, the metabolites of isopropyl alcohol are considerably less toxic, and treatment is largely supportive. Furthermore, there is no indication for the use of fomepizole, an alcohol dehydrogenase inhibitor, unless co-ingestion with methanol or ethylene glycol is suspected.[38]

In forensic pathology, people who have died as a result of diabetic ketoacidosis usually have blood concentrations of isopropyl alcohol of tens of mg/dL, while those by fatal isopropyl alcohol ingestion usually have blood concentrations of hundreds of mg/dL.[21]

References

  1. [1]
    Favre, Henri A.; Powell, Warren H. (2014). Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. p. 631. doi:10.1039/9781849733069. ISBN 978-0-85404-182-4.
  2. [2]
    "Alcohols Rule C-201.1". Nomenclature of Organic Chemistry (The IUPAC 'Blue Book'), Sections A, B, C, D, E, F, and H. Oxford: Pergamon Press. 1979. Designations such as isopropanol, sec-butanol, and tert-butanol are incorrect because there are no hydrocarbons isopropane, sec-butane, and tert-butane to which the suffix "-ol" can be added; such names should be abandoned. Isopropyl alcohol, sec-butyl alcohol, and tert-butyl alcohol are, however, permissible (see Rule C-201.3) because the radicals isopropyl, sec-butyl, and tert-butyl do exist.
  3. [3]
    "Isopropanol_msds". chemsrc.com. Archived from the original on 10 March 2020. Retrieved 4 May 2018.
  4. [4]
    Reeve, W.; Erikson, C. M.; Aluotto, P. F. (1979). "A new method for the determination of the relative acidities of alcohols in alcoholic solutions. The nucleophilicities and competitive reactivities of alkoxides and phenoxides". Can. J. Chem. 57 (20): 2747–2754. doi:10.1139/v79-444.
  5. [5]
    Yaws, C.L. (1999). Chemical Properties Handbook. McGraw-Hill. ISBN 978-0-07-073401-2.
  6. [6]
    Isopropyl alcohol toxicity
  7. [7]
    "Isopropyl alcohol". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  8. [8]
    NIOSH Pocket Guide to Chemical Hazards. "#0359". National Institute for Occupational Safety and Health (NIOSH).
  9. [9]
    "Isopropanol". PubChem. Archived from the original on 12 February 2019. Retrieved 10 February 2019.
  10. [10]
    Doolittle, Arthur K. (1954). The Technology of Solvents and Plasticizers. New York: John Wiley & Sons, Inc. p. 628.
  11. [11]
    The Merck Index (10th ed.). Rahway, NJ: Merck & Co. 1983. p. 749. ISBN 9780911910278.
  12. [12]
    Logsden, John E.; Loke, Richard A. (1999). "Propyl Alcohols". In Kroschwitz, Jacqueline I. (ed.). Kirk-Othmer Concise Encyclopedia of Chemical Technology (4th ed.). New York: John Wiley & Sons, Inc. pp. 1654–1656. ISBN 978-0-471-41961-7.
  13. [13]
    "What is the Freezing Point of Isopropyl Alcohol?". Retrieved 18 December 2023.
  14. [14]
    "Isopropyl Alcohol, , Suitable for Liquid Chromatography, Extract/, UV-Spectrophotometry". VWR International. Archived from the original on 31 March 2016. Retrieved 25 August 2014.
  15. [15]
    "UV Cutoff" (PDF). University of Toronto. Archived (PDF) from the original on 8 October 2013. Retrieved 25 August 2014.
  16. [16]
    Ishihara, K.; Yamamoto, H. (2001). "Aluminum Isopropoxide". Encyclopedia of Reagents for Organic Synthesis. John Wiley & Sons. doi:10.1002/047084289X.ra084. ISBN 0471936235.
  17. [17]
    Wittcoff, M. M.; Green, H. A. (2003). Organic chemistry principles and industrial practice (1. ed., 1. reprint. ed.). Weinheim: Wiley-VCH. p. 4. ISBN 978-3-527-30289-5.
  18. [18]
    Papa, A. J. "Propanols". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a22_173. ISBN 978-3527306732.
  19. [19]
    Logsdon, John E.; Loke, Richard A. (4 December 2000). "Isopropyl Alcohol". Kirk-Othmer Encyclopedia of Chemical Technology. Kirk‑Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Inc. doi:10.1002/0471238961.0919151612150719.a01. ISBN 978-0471238966.
  20. [20]
    CRC Handbook of Chemistry and Physics, 44th ed. pp. 2143–2184.
  21. [21]
    Petersen, Thomas H.; Williams, Timothy; Nuwayhid, Naziha; Harruff, Richard (2012). "Postmortem Detection of Isopropanol in Ketoacidosis". Journal of Forensic Sciences. 57 (3): 674–678. doi:10.1111/j.1556-4029.2011.02045.x. ISSN 0022-1198. PMID 22268588. S2CID 21101240.
  22. [22]
    Directo-Meston, Danielle (9 February 2021). "How to Properly Clean Your Bong, According to Cannabis Experts". Rolling Stone. Retrieved 31 March 2024.
  23. [23]
    Intel application method arcticsilver.com
  24. [24]
    "Sodium Isopropyl Xanthate, SIPX, Xanthate". 3DChem.com. Archived from the original on 4 May 2012. Retrieved 17 June 2012.
  25. [25]
    "Guide to Local Production: WHO-recommended Handrub Formulations" (PDF). World Health Organization. August 2009. Archived (PDF) from the original on 19 May 2009. Retrieved 5 October 2020.
  26. [26]
    Otitis Externa (Swimmers Ear). Medical College of Wisconsin.
  27. [27]
    Lindblad, Adrienne J.; Ting, Rhonda; Harris, Kevin (August 2018). "Inhaled isopropyl alcohol for nausea and vomiting in the emergency department". Canadian Family Physician. 64 (8): 580. ISSN 1715-5258. PMC 6189884. PMID 30108075.
  28. [28]
    Burlage, Henry M.; Welch, H.; Price, C. W. (2006). "Pharmaceutical applications of isopropyl alcohol II. Solubilities of local anesthetics". Journal of the American Pharmaceutical Association. 36 (1): 17–19. doi:10.1002/jps.3030360105. PMID 20285822.
  29. [29]
    Society for Experimental Biology and Medicine (1922). Proceedings of the Society for Experimental Biology and Medicine, Volume 19. p. 85. Archived from the original on 20 December 2021. Retrieved 24 September 2016.
  30. [30]
    Zubel, Irena; Kramkowska, Małgorzata (30 October 2002). "The effect of alcohol additives on etching characteristics in KOH solutions". Sensors and Actuators A: Physical. 101 (3): 255–261. doi:10.1016/S0924-4247(02)00265-0. ISSN 0924-4247.
  31. [31]
    "Isopropanol". Sigma-Aldrich. 19 January 2012. Archived from the original on 17 January 2021. Retrieved 6 July 2012.
  32. [32]
    Mirafzal, Gholam A.; Baumgarten, Henry E. (1988). "Control of peroxidizable compounds: An addendum". Journal of Chemical Education. 65 (9): A226. Bibcode:1988JChEd..65A.226M. doi:10.1021/ed065pA226.
  33. [33]
    "Chemical safety: peroxide formation in 2-propanol". Chemical & Engineering News. 94 (31): 2. 1 August 2016. Archived from the original on 7 November 2017. Retrieved 2 November 2017.
  34. [34]
    "Hazardous Substance Fact Sheet" (PDF). Official Site of The State of New Jersey. Retrieved 4 November 2023.
  35. [35]
    Slaughter RJ, Mason RW, Beasley DM, Vale JA, Schep LJ (2014). "Isopropanol poisoning". Clinical Toxicology. 52 (5): 470–8. doi:10.3109/15563650.2014.914527. PMID 24815348. S2CID 30223646.
  36. [36]
    Chavez, Andrew R.; Sweeney, Michael; Akpunonu, Peter (14 December 2021). "A Case of Unintentional Isopropanol Poisoning via Transdermal Absorption Delayed by Weekly Hemodialysis". The American Journal of Case Reports. 22: e934529. doi:10.12659/AJCR.934529. ISSN 1941-5923. PMC 8689373. PMID 34905533.
  37. [37]
    Kalapos, M. P. (2003). "On the mammalian acetone metabolism: from chemistry to clinical implications". Biochimica et Biophysica Acta (BBA) - General Subjects. 1621 (2): 122–39. doi:10.1016/S0304-4165(03)00051-5. PMID 12726989.
  38. [38]
    "Isopropyl alcohol poisoning". uptodate.com. Archived from the original on 10 October 2017. Retrieved 10 October 2017.
Share this article:

This article uses material from the Wikipedia article Isopropyl_alcohol, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.