Kaptai Dam (Bengali: কাপ্তাই বাঁধ) is on the Karnaphuli River at Kaptai, 65 km (40 mi) upstream from Chittagong in Rangamati District, Bangladesh. It is an earth-fill embankment dam with a reservoir (known as Kaptai Lake) with water storage capacity of 6,477 million cubic metres (5,251,000 acre⋅ft). The primary purpose of the dam and reservoir was to generate hydroelectric power. Construction was completed in 1962, in then-East Pakistan. The generators in the 230 MW (310,000 hp) Karnafuli Hydroelectric Power Station were commissioned between 1962 and 1988.^[1] It is the only hydroelectric power station in Bangladesh.^[2]

Quick Facts Country, Location ...

Kaptai Dam
The dam in 2023
Location of Kaptai Dam in Bangladesh
Country	Bangladesh
Location	Kaptai, Rangamati District
Coordinates	22°29′42″N 92°13′30″E
Purpose	Power
Status	Operational
Construction began	1957
Opening date	1962
Dam and spillways
Type of dam	Embankment
Impounds	Karnaphuli River
Height	45.7 m (150 ft)
Length	670.6 m (2,200 ft)
Width (crest)	7.6 m (25 ft)
Width (base)	45.7 m (150 ft)
Dam volume	1,977,000 m3 (69,800,000 cu ft)
Spillway type	Controlled, 16 gates
Spillway capacity	16,000 m3/s (570,000 cu ft/s)
Reservoir
Creates	Kaptai Lake
Total capacity	6,477,000,000 m3 (5,251,000 acre⋅ft)
Catchment area	11,000 km2 (4,200 sq mi)
Surface area	777 km2 (300 sq mi)
Normal elevation	33 m (108 ft)
Power Station
Commission date	1962, 1982, 1988
Turbines	2 x 40 MW (54,000 hp), 3 x 50 MW (67,000 hp) Kaplan-type
Installed capacity	230 MW (310,000 hp)

Close

A brief reconnaissance occurred in 1906 when the Karnafuli Hydropower Station was first contemplated. A second study was carried out in 1923. In 1946, E. A. Moore recommended the proposed project at Barkal about 65 kilometers upstream of the present dam site at Kaptai. In 1950, the Marz Rendal Vatten Consulting Engineers suggested a site at Chilardak, about 45 kilometers upstream of Kaptai.

In 1951, the government engineers proposed Chitmoram, 11 km (6.8 mi) downstream of the present site. Under the guidance of the chief engineer (Irrigation) Khwaja Azimuddin, the construction site was chosen in 1951. Utah International Inc. was selected as a construction contractor. Construction of the dam started in 1957 and was completed in 1962 during the era of President Muhammad Ayub Khan.

Starting in 1957, the initial phase of the construction was completed in 1962. By this time the dam, spillway, penstock, and two 40 MW Kaplan turbine generators were built in the power station. In August 1982 a 50 MW generator was commissioned. In October 1988 the fourth and fifth generating units, both 50 MW Kaplan-type turbines, were installed which raised the total generation capacity to 230 MW.^[3]

The total cost of Unit 1, Unit 2, and a part of Unit 3 was Rs. 503 million and the total cost of extension was Tk. 1,900  million. The project was financed by the East Pakistan Government (at the time), the United States, and the Overseas Economic Cooperation Fund.^[3][1]

The earthen dam is 670 m (2,200 ft) long and 45.7 m (150 ft) wide with a 16-gate spillway on the left side.^[1] The construction of the dam submerged 655 km² (253 sq mi) area. This included 220 km² (85 sq mi) of cultivable land, 40 percent of the cultivable land in the area, and displaced 18,000 families and 100,000 tribal people, of which 70% were Chakma. The dam flooded the original Rangamati town and other structures.^[4]

Inhabitants of the storage reservoir area who lost their homes and farmland due to flooding were not compensated. More than 40,000 Chakma tribals emigrated to Arunachal Pradesh,^[5] India.^[6] The scarcity of land is considered a main cause of the continuing conflict in the area.^[4]

The building of the dam and reservoir also caused the destruction of wilderness and the loss of wildlife and wildlife habitats.^[1]