Light_resin_transfer_moulding

Light resin transfer moulding

Light resin transfer moulding

Add article description

Light resin transfer moulding (Light RTM) is a process by which products of Composite materials are manufactured using a closed mold system.[1]

Procedure

Similar to the methods performed in resin transfer molding, Light RTM involves a closed mold process. A vacuum holds mold A and mold B together to result in two finished sides with fixed thickness levels. Vacuum rings around the tools hold the molds together for this process after dry fiber reinforcements are loaded into mold A before joining with mold B.

The air is vacuumed out of the molds with a lower vacuum level, separate from the tooling. After the air is removed the resin is injected into the part. The vacuum remains in effect into the resin is cured.[2][3]

References

  1. [1]
    "Light Resin Transfer Molding : CompositesWorld". www.compositesworld.com. Retrieved 2020-11-14.
  2. [2]
    "Light RTM Process (LRTM)". RTM Composites. Retrieved 2020-11-14.
  3. [3]
    "Light Resin Transfer Moulding (LRTM)". BFG Architecture. Retrieved 2020-11-14.
Share this article:

This article uses material from the Wikipedia article Light_resin_transfer_moulding, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.