M7_Road_(Copperbelt)

M18 road (Zambia)

M18 road (Zambia)

Road in Zambia


The M18 road is a road in Zambia that connects Kitwe in the Copperbelt Province with Kasempa in the North-Western Province via Kalulushi and Lufwanyama.[1][2] It is the only other road after the T5 road that connects the towns of the North-Western and Copperbelt provinces. The section from Kitwe to Kalulushi is designated as the M7 road[1][2] while the route from Kalulushi westwards to Kasempa District is designated as the M18 road on Zambia's road network.[1][2]

Quick Facts Route information, Length ...

M7 road

Quick Facts M7 Road, Route information ...

The M7 begins in the commercial city centre of Kitwe, at a roundabout junction with the T3 road (Independence Avenue) from Chingola in the north-west and Ndola in the south-east. It begins by going westwards as Kanyanta Road up to the Mindolo Road junction, where it becomes Mindolo Road towards the north-west. At the second left turn, the M7 turns westwards and goes for 6 kilometres to reach a junction with the M18 road east of Kalulushi. From the M18 junction, the M7 goes westwards for another 6 kilometres, meeting the southern terminus of the M16 road (which connects north to Chambishi), to end in Kalulushi Central.[1][2]

M18 road

Quick Facts Route information, Length ...

From the M7 junction east of Kalulushi, the M18 starts by going southwards for a few metres before turning westwards to separate Kalulushi Central from the southern part of the town, where it meets a road to Southdowns Airport. From Kalulushi, the M18 goes westwards for 245 kilometres, through the rural town of Lufwanyama, crossing into the North-Western Province, to reach its western terminus at a junction with the M8 road in the settlement named Kawana in Kasempa District (60 kilometres north of Kasempa), with the M8 providing access to the towns of Kasempa and Kabompo in the south (& Solwezi in the north).[1][2]

Route for trucks

In order for heavy vehicles coming from Ndola and Lusaka (using the T3 Road) to avoid the Kitwe City Centre and Kitwe's northern suburbs (which are busy commercial areas) on the way to DR Congo via Chingola, some trucks are advised to use the M7 road from Kitwe to Kalulushi, then the M16 road from Kalulushi to Chambishi, as an alternative route.[3] Just before Chambishi, heavy vehicles rejoin the main road and proceed through Chingola to the DR Congo Border (Kasumbalesa).

See also


References

  1. "Roads and Road Traffic (Amendment) Act, Cap 464 | Zambia Legal Information Institute". zambialii.org. Retrieved 2019-07-03.
  2. "Roads and Road Traffic Act | National Assembly of Zambia". www.parliament.gov.zm. Retrieved 2022-06-27.

Share this article:

This article uses material from the Wikipedia article M7_Road_(Copperbelt), and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.