Maximum parsimony (phylogenetics)
In phylogenetics, maximum parsimony is an optimality criterion under which the phylogenetic tree that minimizes the total number of character-state changes is to be preferred. Under the maximum-parsimony criterion, the optimal tree will minimize the amount of homoplasy (i.e., convergent evolution, parallel evolution, and evolutionary reversals). In other words, under this criterion, the shortest possible tree that explains the data is considered best. The principle is akin to Occam's razor, which states that—all else being equal—the simplest hypothesis that explains the data should be selected. Some of the basic ideas behind maximum parsimony were presented by James S. Farris in 1970 and Walter M. Fitch in 1971.
This article needs additional citations for verification. (July 2015)
This article may be too technical for most readers to understand. (May 2021)
Maximum parsimony is an intuitive and simple criterion, and it is popular for this reason. However, although it is easy to score a phylogenetic tree (by counting the number of character-state changes), there is no algorithm to quickly generate the most-parsimonious tree. Instead, the most-parsimonious tree must be found in "tree space" (i.e., amongst all possible trees). For a small number of taxa (i.e., fewer than nine) it is possible to do an exhaustive search, in which every possible tree is scored, and the best one is selected. For nine to twenty taxa, it will generally be preferable to use branch-and-bound, which is also guaranteed to return the best tree. For greater numbers of taxa, a heuristic search must be performed.
Because the most-parsimonious tree is always the shortest possible tree, this means that—in comparison to the "true" tree that actually describes the evolutionary history of the organisms under study—the "best" tree according to the maximum-parsimony criterion will often underestimate the actual evolutionary change that has occurred. In addition, maximum parsimony is not statistically consistent. That is, it is not guaranteed to produce the true tree with high probability, given sufficient data. As demonstrated in 1978 by Joe Felsenstein, maximum parsimony can be inconsistent under certain conditions, such as long-branch attraction. Of course, any phylogenetic algorithm could also be statistically inconsistent if the model it employs to estimate the preferred tree does not accurately match the way that evolution occurred in that clade. This is unknowable. Therefore, while statistical consistency is an interesting theoretical property, it lies outside the realm of testability, and is irrelevant to empirical phylogenetic studies.
Alternate characterization and rationale
Maximization of parsimony (preferring the simpler of two otherwise equally adequate theorizations) has proven useful in many fields. Occam's razor, a principle of theoretical parsimony suggested by William of Ockham in the 1320s, asserted that it is vain to give an explanation which involves more assumptions than necessary.
In phylogenetics, parsimony is mostly interpreted as favoring the trees that minimize the amount of evolutionary change required (see for example ). Alternatively, phylogenetic parsimony can be characterized as favoring the trees that maximize explanatory power by minimizing the number of observed similarities that cannot be explained by inheritance and common descent. Minimization of required evolutionary change on the one hand and maximization of observed similarities that can be explained as homology on the other may result in different preferred trees when some observed features are not applicable in some groups that are included in the tree, and the latter can be seen as the more general approach.
While evolution is not an inherently parsimonious process, centuries of scientific experience lend support to the aforementioned principle of parsimony (Occam's razor). Namely, the supposition of a simpler, more parsimonious chain of events is preferable to the supposition of a more complicated, less parsimonious chain of events. Hence, parsimony (sensu lato) is typically sought in constructing phylogenetic trees, and in scientific explanation generally.
Parsimony is part of a class of character-based tree estimation methods which use a matrix of discrete phylogenetic characters to infer one or more optimal phylogenetic trees for a set of taxa, commonly a set of species or reproductively isolated populations of a single species. These methods operate by evaluating candidate phylogenetic trees according to an explicit optimality criterion; the tree with the most favorable score is taken as the best estimate of the phylogenetic relationships of the included taxa. Maximum parsimony is used with most kinds of phylogenetic data; until recently, it was the only widely used character-based tree estimation method used for morphological data.
Estimating phylogenies is not a trivial problem. A huge number of possible phylogenetic trees exist for any reasonably sized set of taxa; for example, a mere ten species gives over two million possible unrooted trees. These possibilities must be searched to find a tree that best fits the data according to the optimality criterion. However, the data themselves do not lead to a simple, arithmetic solution to the problem. Ideally, we would expect the distribution of whatever evolutionary characters (such as phenotypic traits or alleles) to directly follow the branching pattern of evolution. Thus we could say that if two organisms possess a shared character, they should be more closely related to each other than to a third organism that lacks this character (provided that character was not present in the last common ancestor of all three, in which case it would be a symplesiomorphy). We would predict that bats and monkeys are more closely related to each other than either is to an elephant, because male bats and monkeys possess external testicles, which elephants lack. However, we cannot say that bats and monkeys are more closely related to one another than they are to whales, though the two have external testicles absent in whales, because we believe that the males in the last common ancestral species of the three had external testicles.
However, the phenomena of convergent evolution, parallel evolution, and evolutionary reversals (collectively termed homoplasy) add an unpleasant wrinkle to the problem of estimating phylogeny. For a number of reasons, two organisms can possess a trait not present in their last common ancestor: If we naively took the presence of this trait as evidence of a relationship, we would reconstruct an incorrect tree. Real phylogenetic data include substantial homoplasy, with different parts of the data suggesting sometimes very different relationships. Methods used to estimate phylogenetic trees are explicitly intended to resolve the conflict within the data by picking the phylogenetic tree that is the best fit to all the data overall, accepting that some data simply will not fit. It is often mistakenly believed that parsimony assumes that convergence is rare; in fact, even convergently derived characters have some value in maximum-parsimony-based phylogenetic analyses, and the prevalence of convergence does not systematically affect the outcome of parsimony-based methods.
Data that do not fit a tree perfectly are not simply "noise", they can contain relevant phylogenetic signal in some parts of a tree, even if they conflict with the tree overall. In the whale example given above, the lack of external testicles in whales is homoplastic: It reflects a return to the condition present in ancient ancestors of mammals, whose testicles were internal. This similarity between whales and ancient mammal ancestors is in conflict with the tree we accept, since it implies that the mammals with external testicles should form a group excluding whales. However, among the whales, the reversal to internal testicles actually correctly associates the various types of whales (including dolphins and porpoises) into the group Cetacea. Still, the determination of the best-fitting tree—and thus which data do not fit the tree—is a complex process. Maximum parsimony is one method developed to do this.
The input data used in a maximum parsimony analysis is in the form of "characters" for a range of taxa. There is no generally agreed-upon definition of a phylogenetic character, but operationally a character can be thought of as an attribute, an axis along which taxa are observed to vary. These attributes can be physical (morphological), molecular, genetic, physiological, or behavioral. The only widespread agreement on characters seems to be that variation used for character analysis should reflect heritable variation. Whether it must be directly heritable, or whether indirect inheritance (e.g., learned behaviors) is acceptable, is not entirely resolved.
Each character is divided into discrete character states, into which the variations observed are classified. Character states are often formulated as descriptors, describing the condition of the character substrate. For example, the character "eye color" might have the states "blue" and "brown." Characters can have two or more states (they can have only one, but these characters lend nothing to a maximum parsimony analysis, and are often excluded).
Coding characters for phylogenetic analysis is not an exact science, and there are numerous complicating issues. Typically, taxa are scored with the same state if they are more similar to one another in that particular attribute than each is to taxa scored with a different state. This is not straightforward when character states are not clearly delineated or when they fail to capture all of the possible variation in a character. How would one score the previously mentioned character for a taxon (or individual) with hazel eyes? Or green? As noted above, character coding is generally based on similarity: Hazel and green eyes might be lumped with blue because they are more similar to that color (being light), and the character could be then recoded as "eye color: light; dark." Alternatively, there can be multi-state characters, such as "eye color: brown; hazel, blue; green."
Ambiguities in character state delineation and scoring can be a major source of confusion, dispute, and error in phylogenetic analysis using character data. Note that, in the above example, "eyes: present; absent" is also a possible character, which creates issues because "eye color" is not applicable if eyes are not present. For such situations, a "?" ("unknown") is scored, although sometimes "X" or "-" (the latter usually in sequence data) are used to distinguish cases where a character cannot be scored from a case where the state is simply unknown. Current implementations of maximum parsimony generally treat unknown values in the same manner: the reasons the data are unknown have no particular effect on analysis. Effectively, the program treats a ? as if it held the state that would involve the fewest extra steps in the tree (see below), although this is not an explicit step in the algorithm.
Genetic data are particularly amenable to character-based phylogenetic methods such as maximum parsimony because protein and nucleotide sequences are naturally discrete: A particular position in a nucleotide sequence can be either adenine, cytosine, guanine, or thymine / uracil, or a sequence gap; a position (residue) in a protein sequence will be one of the basic amino acids or a sequence gap. Thus, character scoring is rarely ambiguous, except in cases where sequencing methods fail to produce a definitive assignment for a particular sequence position. Sequence gaps are sometimes treated as characters, although there is no consensus on how they should be coded.
Characters can be treated as unordered or ordered. For a binary (two-state) character, this makes little difference. For a multi-state character, unordered characters can be thought of as having an equal "cost" (in terms of number of "evolutionary events") to change from any one state to any other; complementarily, they do not require passing through intermediate states. Ordered characters have a particular sequence in which the states must occur through evolution, such that going between some states requires passing through an intermediate. This can be thought of complementarily as having different costs to pass between different pairs of states. In the eye-color example above, it is possible to leave it unordered, which imposes the same evolutionary "cost" to go from brown-blue, green-blue, green-hazel, etc. Alternatively, it could be ordered brown-hazel-green-blue; this would normally imply that it would cost two evolutionary events to go from brown-green, three from brown-blue, but only one from brown-hazel. This can also be thought of as requiring eyes to evolve through a "hazel stage" to get from brown to green, and a "green stage" to get from hazel to blue, etc. For many characters, it is not obvious if and how they should be ordered. On the contrary, for characters that represent discretization of an underlying continuous variable, like shape, size, and ratio characters, ordering is logical, and simulations have shown that this improves ability to recover correct clades, while decreasing the recovering of erroneous clades.
There is a lively debate on the utility and appropriateness of character ordering, but no consensus. Some authorities order characters when there is a clear logical, ontogenetic, or evolutionary transition among the states (for example, "legs: short; medium; long"). Some accept only some of these criteria. Some run an unordered analysis, and order characters that show a clear order of transition in the resulting tree (which practice might be accused of circular reasoning). Some authorities refuse to order characters at all, suggesting that it biases an analysis to require evolutionary transitions to follow a particular path.
It is also possible to apply differential weighting to individual characters. This is usually done relative to a "cost" of 1. Thus, some characters might be seen as more likely to reflect the true evolutionary relationships among taxa, and thus they might be weighted at a value 2 or more; changes in these characters would then count as two evolutionary "steps" rather than one when calculating tree scores (see below). There has been much discussion in the past about character weighting. Most authorities now weight all characters equally, although exceptions are common. For example, allele frequency data is sometimes pooled in bins and scored as an ordered character. In these cases, the character itself is often downweighted so that small changes in allele frequencies count less than major changes in other characters. Also, the third codon position in a coding nucleotide sequence is particularly labile, and is sometimes downweighted, or given a weight of 0, on the assumption that it is more likely to exhibit homoplasy. In some cases, repeated analyses are run, with characters reweighted in inverse proportion to the degree of homoplasy discovered in the previous analysis (termed successive weighting); this is another technique that might be considered circular reasoning.
Character state changes can also be weighted individually. This is often done for nucleotide sequence data; it has been empirically determined that certain base changes (A-C, A-T, G-C, G-T, and the reverse changes) occur much less often than others (A-G, C-T, and their reverse changes). These changes are therefore often weighted more. As shown above in the discussion of character ordering, ordered characters can be thought of as a form of character state weighting.
Some systematists prefer to exclude characters known to be, or suspected to be, highly homoplastic or that have a large number of unknown entries ("?"). As noted below, theoretical and simulation work has demonstrated that this is likely to sacrifice accuracy rather than improve it. This is also the case with characters that are variable in the terminal taxa: theoretical, congruence, and simulation studies have all demonstrated that such polymorphic characters contain significant phylogenetic information.
The time required for a parsimony analysis (or any phylogenetic analysis) is proportional to the number of taxa (and characters) included in the analysis. Also, because more taxa require more branches to be estimated, more uncertainty may be expected in large analyses. Because data collection costs in time and money often scale directly with the number of taxa included, most analyses include only a fraction of the taxa that could have been sampled. Indeed, some authors have contended that four taxa (the minimum required to produce a meaningful unrooted tree) are all that is necessary for accurate phylogenetic analysis, and that more characters are more valuable than more taxa in phylogenetics. This has led to a raging controversy about taxon sampling.
Empirical, theoretical, and simulation studies have led to a number of dramatic demonstrations of the importance of adequate taxon sampling. Most of these can be summarized by a simple observation: a phylogenetic data matrix has dimensions of characters times taxa. Doubling the number of taxa doubles the amount of information in a matrix just as surely as doubling the number of characters. Each taxon represents a new sample for every character, but, more importantly, it (usually) represents a new combination of character states. These character states can not only determine where that taxon is placed on the tree, they can inform the entire analysis, possibly causing different relationships among the remaining taxa to be favored by changing estimates of the pattern of character changes.
The most disturbing weakness of parsimony analysis, that of long-branch attraction (see below) is particularly pronounced with poor taxon sampling, especially in the four-taxon case. This is a well-understood case in which additional character sampling may not improve the quality of the estimate. As taxa are added, they often break up long branches (especially in the case of fossils), effectively improving the estimation of character state changes along them. Because of the richness of information added by taxon sampling, it is even possible to produce highly accurate estimates of phylogenies with hundreds of taxa using only a few thousand characters.
Although many studies have been performed, there is still much work to be done on taxon sampling strategies. Because of advances in computer performance, and the reduced cost and increased automation of molecular sequencing, sample sizes overall are on the rise, and studies addressing the relationships of hundreds of taxa (or other terminal entities, such as genes) are becoming common. Of course, this is not to say that adding characters is not also useful; the number of characters is increasing as well.
Some systematists prefer to exclude taxa based on the number of unknown character entries ("?") they exhibit, or because they tend to "jump around" the tree in analyses (i.e., they are "wildcards"). As noted below, theoretical and simulation work has demonstrated that this is likely to sacrifice accuracy rather than improve it. Although these taxa may generate more most-parsimonious trees (see below), methods such as agreement subtrees and reduced consensus can still extract information on the relationships of interest.
It has been observed that inclusion of more taxa tends to lower overall support values (bootstrap percentages or decay indices, see below). The cause of this is clear: as additional taxa are added to a tree, they subdivide the branches to which they attach, and thus dilute the information that supports that branch. While support for individual branches is reduced, support for the overall relationships is actually increased. Consider analysis that produces the following tree: (fish, (lizard, (whale, (cat, monkey)))). Adding a rat and a walrus will probably reduce the support for the (whale, (cat, monkey)) clade, because the rat and the walrus may fall within this clade, or outside of the clade, and since these five animals are all relatively closely related, there should be more uncertainty about their relationships. Within error, it may be impossible to determine any of these animals' relationships relative to one another. However, the rat and the walrus will probably add character data that cements the grouping any two of these mammals exclusive of the fish or the lizard; where the initial analysis might have been misled, say, by the presence of fins in the fish and the whale, the presence of the walrus, with blubber and fins like a whale but whiskers like a cat and a rat, firmly ties the whale to the mammals.
To cope with this problem, agreement subtrees, reduced consensus, and double-decay analysis seek to identify supported relationships (in the form of "n-taxon statements," such as the four-taxon statement "(fish, (lizard, (cat, whale)))") rather than whole trees. If the goal of an analysis is a resolved tree, as is the case for comparative phylogenetics, these methods cannot solve the problem. However, if the tree estimate is so poorly supported, the results of any analysis derived from the tree will probably be too suspect to use anyway.
A maximum parsimony analysis runs in a very straightforward fashion. Trees are scored according to the degree to which they imply a parsimonious distribution of the character data. The most parsimonious tree for the dataset represents the preferred hypothesis of relationships among the taxa in the analysis.
Trees are scored (evaluated) by using a simple algorithm to determine how many "steps" (evolutionary transitions) are required to explain the distribution of each character. A step is, in essence, a change from one character state to another, although with ordered characters some transitions require more than one step. Contrary to popular belief, the algorithm does not explicitly assign particular character states to nodes (branch junctions) on a tree: the fewest steps can involve multiple, equally costly assignments and distributions of evolutionary transitions. What is optimized is the total number of changes.
There are many more possible phylogenetic trees than can be searched exhaustively for more than eight taxa or so. A number of algorithms are therefore used to search among the possible trees. Many of these involve taking an initial tree (usually the favored tree from the last iteration of the algorithm), and perturbing it to see if the change produces a higher score.
The trees resulting from parsimony search are unrooted: They show all the possible relationships of the included taxa, but they lack any statement on relative times of divergence. A particular branch is chosen to root the tree by the user. This branch is then taken to be outside all the other branches of the tree, which together form a monophyletic group. This imparts a sense of relative time to the tree. Incorrect choice of a root can result in incorrect relationships on the tree, even if the tree is itself correct in its unrooted form.
Parsimony analysis often returns a number of equally most-parsimonious trees (MPTs). A large number of MPTs is often seen as an analytical failure, and is widely believed to be related to the number of missing entries ("?") in the dataset, characters showing too much homoplasy, or the presence of topologically labile "wildcard" taxa (which may have many missing entries). Numerous methods have been proposed to reduce the number of MPTs, including removing characters or taxa with large amounts of missing data before analysis, removing or downweighting highly homoplastic characters (successive weighting) or removing wildcard taxa (the phylogenetic trunk method) a posteriori and then reanalyzing the data.
Numerous theoretical and simulation studies have demonstrated that highly homoplastic characters, characters and taxa with abundant missing data, and "wildcard" taxa contribute to the analysis. Although excluding characters or taxa may appear to improve resolution, the resulting tree is based on less data, and is therefore a less reliable estimate of the phylogeny (unless the characters or taxa are non informative, see safe taxonomic reduction). Today's general consensus is that having multiple MPTs is a valid analytical result; it simply indicates that there is insufficient data to resolve the tree completely. In many cases, there is substantial common structure in the MPTs, and differences are slight and involve uncertainty in the placement of a few taxa. There are a number of methods for summarizing the relationships within this set, including consensus trees, which show common relationships among all the taxa, and pruned agreement subtrees, which show common structure by temporarily pruning "wildcard" taxa from every tree until they all agree. Reduced consensus takes this one step further, by showing all subtrees (and therefore all relationships) supported by the input trees.
Even if multiple MPTs are returned, parsimony analysis still basically produces a point-estimate, lacking confidence intervals of any sort. This has often been levelled as a criticism, since there is certainly error in estimating the most-parsimonious tree, and the method does not inherently include any means of establishing how sensitive its conclusions are to this error. Several methods have been used to assess support.
Jackknifing and bootstrapping, well-known statistical resampling procedures, have been employed with parsimony analysis. The jackknife, which involves resampling without replacement ("leave-one-out") can be employed on characters or taxa; interpretation may become complicated in the latter case, because the variable of interest is the tree, and comparison of trees with different taxa is not straightforward. The bootstrap, resampling with replacement (sample x items randomly out of a sample of size x, but items can be picked multiple times), is only used on characters, because adding duplicate taxa does not change the result of a parsimony analysis. The bootstrap is much more commonly employed in phylogenetics (as elsewhere); both methods involve an arbitrary but large number of repeated iterations involving perturbation of the original data followed by analysis. The resulting MPTs from each analysis are pooled, and the results are usually presented on a 50% Majority Rule Consensus tree, with individual branches (or nodes) labelled with the percentage of bootstrap MPTs in which they appear. This "bootstrap percentage" (which is not a P-value, as is sometimes claimed) is used as a measure of support. Technically, it is supposed to be a measure of repeatability, the probability that that branch (node, clade) would be recovered if the taxa were sampled again. Experimental tests with viral phylogenies suggest that the bootstrap percentage is not a good estimator of repeatability for phylogenetics, but it is a reasonable estimator of accuracy. In fact, it has been shown that the bootstrap percentage, as an estimator of accuracy, is biased, and that this bias results on average in an underestimate of confidence (such that as little as 70% support might really indicate up to 95% confidence). However, the direction of bias cannot be ascertained in individual cases, so assuming that high values bootstrap support indicate even higher confidence is unwarranted.
Another means of assessing support is Bremer support, or the decay index which is a parameter of a given data set, rather than an estimate based on pseudoreplicated subsamples, as are the bootstrap and jackknife procedures described above. Bremer support (also known as branch support) is simply the difference in number of steps between the score of the MPT(s), and the score of the most parsimonious tree that does not contain a particular clade (node, branch). It can be thought of as the number of steps you have to add to lose that clade; implicitly, it is meant to suggest how great the error in the estimate of the score of the MPT must be for the clade to no longer be supported by the analysis, although this is not necessarily what it does. Branch support values are often fairly low for modestly-sized data sets (one or two steps being typical), but they often appear to be proportional to bootstrap percentages. As data matrices become larger, branch support values often continue to increase as bootstrap values plateau at 100%. Thus, for large data matrices, branch support values may provide a more informative means to compare support for strongly-supported branches. However, interpretation of decay values is not straightforward, and they seem to be preferred by authors with philosophical objections to the bootstrap (although many morphological systematists, especially paleontologists, report both). Double-decay analysis is a decay counterpart to reduced consensus that evaluates the decay index for all possible subtree relationships (n-taxon statements) within a tree.
Problems with maximum parsimony phylogenetic inference
Maximum parsimony is an epistemologically straightforward approach that makes few mechanistic assumptions, and is popular for this reason. However, it may not be statistically consistent under certain circumstances. Consistency, here meaning the monotonic convergence on the correct answer with the addition of more data, is a desirable property of statistical methods. As demonstrated in 1978 by Joe Felsenstein, maximum parsimony can be inconsistent under certain conditions. The category of situations in which this is known to occur is called long branch attraction, and occurs, for example, where there are long branches (a high level of substitutions) for two characters (A & C), but short branches for another two (B & D). A and B diverged from a common ancestor, as did C and D.
Assume for simplicity that we are considering a single binary character (it can either be + or -). Because the distance from B to D is small, in the vast majority of all cases, B and D will be the same. Here, we will assume that they are both + (+ and - are assigned arbitrarily and swapping them is only a matter of definition). If this is the case, there are four remaining possibilities. A and C can both be +, in which case all taxa are the same and all the trees have the same length. A can be + and C can be -, in which case only one character is different, and we cannot learn anything, as all trees have the same length. Similarly, A can be - and C can be +. The only remaining possibility is that A and C are both -. In this case, however, the evidence suggests that A and C group together, and B and D together. As a consequence, if the "true tree" is a tree of this type, the more data we collect (i.e. the more characters we study), the more the evidence will support the wrong tree. Of course, except in mathematical simulations, we never know what the "true tree" is. Thus, unless we are able to devise a model that is guaranteed to accurately recover the "true tree," any other optimality criterion or weighting scheme could also, in principle, be statistically inconsistent. The bottom line is, that while statistical inconsistency is an interesting theoretical issue, it is empirically a purely metaphysical concern, outside the realm of empirical testing. Any method could be inconsistent, and there is no way to know for certain whether it is, or not. It is for this reason that many systematists characterize their phylogenetic results as hypotheses of relationship.
Another complication with maximum parsimony, and other optimaltiy-criterion based phylogenetic methods, is that finding the shortest tree is an NP-hard problem. The only currently available, efficient way of obtaining a solution, given an arbitrarily large set of taxa, is by using heuristic methods which do not guarantee that the shortest tree will be recovered. These methods employ hill-climbing algorithms to progressively approach the best tree. However, it has been shown that there can be "tree islands" of suboptimal solutions, and the analysis can become trapped in these local optima. Thus, complex, flexible heuristics are required to ensure that tree space has been adequately explored. Several heuristics are available, including nearest neighbor interchange (NNI), tree bisection reconnection (TBR), and the parsimony ratchet.
It has been asserted that a major problem, especially for paleontology, is that maximum parsimony assumes that the only way two species can share the same nucleotide at the same position is if they are genetically related. This asserts that phylogenetic applications of parsimony assume that all similarity is homologous (other interpretations, such as the assertion that two organisms might not be related at all, are nonsensical). This is emphatically not the case: as with any form of character-based phylogeny estimation, parsimony is used to test the homologous nature of similarities by finding the phylogenetic tree which best accounts for all of the similarities.
It is often stated that parsimony is not relevant to phylogenetic inference because "evolution is not parsimonious." In most cases, there is no explicit alternative proposed; if no alternative is available, any statistical method is preferable to none at all. Additionally, it is not clear what would be meant if the statement "evolution is parsimonious" were in fact true. This could be taken to mean that more character changes may have occurred historically than are predicted using the parsimony criterion. Because parsimony phylogeny estimation reconstructs the minimum number of changes necessary to explain a tree, this is quite possible. However, it has been shown through simulation studies, testing with known in vitro viral phylogenies, and congruence with other methods, that the accuracy of parsimony is in most cases not compromised by this. Parsimony analysis uses the number of character changes on trees to choose the best tree, but it does not require that exactly that many changes, and no more, produced the tree. As long as the changes that have not been accounted for are randomly distributed over the tree (a reasonable null expectation), the result should not be biased. In practice, the technique is robust: maximum parsimony exhibits minimal bias as a result of choosing the tree with the fewest changes.
An analogy can be drawn with choosing among contractors based on their initial (nonbinding) estimate of the cost of a job. The actual finished cost is very likely to be higher than the estimate. Despite this, choosing the contractor who furnished the lowest estimate should theoretically result in the lowest final project cost. This is because, in the absence of other data, we would assume that all of the relevant contractors have the same risk of cost overruns. In practice, of course, unscrupulous business practices may bias this result; in phylogenetics, too, some particular phylogenetic problems (for example, long branch attraction, described above) may potentially bias results. In both cases, however, there is no way to tell if the result is going to be biased, or the degree to which it will be biased, based on the estimate itself. With parsimony too, there is no way to tell that the data are positively misleading, without comparison to other evidence.
Parsimony is often characterized as implicitly adopting the position that evolutionary change is rare, or that homoplasy (convergence and reversal) is minimal in evolution. This is not entirely true: parsimony minimizes the number of convergences and reversals that are assumed by the preferred tree, but this may result in a relatively large number of such homoplastic events. It would be more appropriate to say that parsimony assumes only the minimum amount of change implied by the data. As above, this does not require that these were the only changes that occurred; it simply does not infer changes for which there is no evidence. The shorthand for describing this is that "parsimony minimizes assumed homoplasies, it does not assume that homoplasy is minimal."
Parsimony is also sometimes associated with the notion that "the simplest possible explanation is the best," a generalisation of Occam's Razor. Parsimony does prefer the solution that requires the fewest unsubstantiated assumptions and unsupportable conclusions, the solution that goes the least theoretical distance beyond the data. This is a very common approach to science, especially when dealing with systems that are so complex as to defy simple models. Parsimony does not by any means necessarily produce a "simple" assumption. Indeed, as a general rule, most character datasets are so "noisy" that no truly "simple" solution is possible.
Recent simulation studies suggest that parsimony may be less accurate than trees built using Bayesian approaches for morphological data, potentially due to overprecision, although this has been disputed . Studies using novel simulation methods have demonstrated that differences between inference methods result from the search strategy and consensus method employed, rather than the optimization used. Also, analyses of 38 molecular and 86 morphological empirical datasets have shown that the common mechanism assumed by the evolutionary models used in model-based phylogenetics apply to most molecular, but few morphological datasets. This finding validates the use of model-based phylogenetics for molecular data, but suggests that for morphological data, parsimony remains advantageous, at least until more sophisticated models become available for phenotypic data.
There are several other methods for inferring phylogenies based on discrete character data, including maximum likelihood and Bayesian inference. Each offers potential advantages and disadvantages. In practice, these methods tend to favor trees that are very similar to the most parsimonious tree(s) for the same dataset; however, they allow for complex modelling of evolutionary processes, and as classes of methods are statistically consistent and are not susceptible to long-branch attraction. Note, however, that the performance of likelihood and Bayesian methods are dependent on the quality of the particular model of evolution employed; an incorrect model can produce a biased result - just like parsimony. In addition, they are still quite computationally slow relative to parsimony methods, sometimes requiring weeks to run large datasets. Most of these methods have particularly avid proponents and detractors; parsimony especially has been advocated as philosophically superior (most notably by ardent cladists). One area where parsimony still holds much sway is in the analysis of morphological data, because—until recently—stochastic models of character change were not available for non-molecular data, and they are still not widely implemented. Parsimony has also recently been shown to be more likely to recover the true tree in the face of profound changes in evolutionary ("model") parameters (e.g., the rate of evolutionary change) within a tree.
Distance matrices can also be used to generate phylogenetic trees. Non-parametric distance methods were originally applied to phenetic data using a matrix of pairwise distances and reconciled to produce a tree. The distance matrix can come from a number of different sources, including immunological distance, morphometric analysis, and genetic distances. For phylogenetic character data, raw distance values can be calculated by simply counting the number of pairwise differences in character states (Manhattan distance) or by applying a model of evolution. Notably, distance methods also allow use of data that may not be easily converted to character data, such as DNA-DNA hybridization assays. Today, distance-based methods are often frowned upon because phylogenetically-informative data can be lost when converting characters to distances. There are a number of distance-matrix methods and optimality criteria, of which the minimum evolution criterion is most closely related to maximum parsimony.
From among the distance methods, there exists a phylogenetic estimation criterion, known as Minimum Evolution (ME), that shares with maximum-parsimony the aspect of searching for the phylogeny that has the shortest total sum of branch lengths.
A subtle difference distinguishes the maximum-parsimony criterion from the ME criterion: while maximum-parsimony is based on an abductive heuristic, i.e., the plausibility of the simplest evolutionary hypothesis of taxa with respect to the more complex ones, the ME criterion is based on Kidd and Sgaramella-Zonta's conjectures (proven true 22 years later by Rzhetsky and Nei) stating that if the evolutionary distances from taxa were unbiased estimates of the true evolutionary distances then the true phylogeny of taxa would have a length shorter than any other alternative phylogeny compatible with those distances. Rzhetsky and Nei's results set the ME criterion free from the Occam's razor principle and confer it a solid theoretical and quantitative basis.
- Farris JS (March 1970). "Methods for computing Wagner trees". Systematic Biology. 19 (1): 83–92. doi:10.1093/sysbio/19.1.83. JSTOR 2412028.
- Fitch WM (1971). "Toward defining the course of evolution: minimum change for a specified tree topology". Systematic Zoology. 20 (4): 406–416. doi:10.2307/2412116. JSTOR 2412116.
- Felsenstein J (1978). "Cases in which parsimony and compatibility methods will be positively misleading". Systematic Zoology. 27 (4): 401–410. doi:10.1093/sysbio/27.4.401.
- Brower AV (October 2018). "Statistical consistency and phylogenetic inference: a brief review". Cladistics. 34 (5): 562–7. doi:10.1111/cla.12216.
- Farris JS (1983). "The logical basis of phylogenetic analysis.". In Platnick NI, Funk VA (eds.). Advances in Cladistics. 2. New York, New York: Columbia University Press. pp. 7–36.
- Farris JS (October 2008). "Parsimony and explanatory power". Cladistics. 24 (5): 825–47. doi:10.1111/j.1096-0031.2008.00214.x. S2CID 32931349.
- De Laet J (2005). "Parsimony and the problem of inapplicables in sequence data.". In Albert VA (ed.). Parsimony, phylogeny and genomics. Oxford University Press. pp. 81–116. ISBN 978-0-19-856493-5.
- De Laet J (2014). "Parsimony analysis of unaligned sequence data: maximization of homology and minimization of homoplasy, not Minimization of operationally defined total cost or minimization of equally weighted transformations". Cladistics. 31 (5): 550–567. doi:10.1111/cla.12098.
- Goloboff, Pablo; De Laet, Jan; Ríos‐Tamayo, Duniesky; Szumik, Claudia (2021). "A reconsideration of inapplicable characters, and an approximation with step‐matrix recoding". Cladistics. doi:10.1111/cla.12456.
- Jaynes ET (2003). Bretthorst GL (ed.). Probability theory: the logic of science. Cambridge, UK: Cambridge University Press. ISBN 978-0-521-59271-0.
- Sober E (1983). "Parsimony in Systematics: Philosophical Issues". Annual Review of Ecology and Systematics. 14: 335–357. doi:10.1146/annurev.es.14.110183.002003.
- Wiens, John J. (2001). "Character Analysis in Morphological Phylogenetics: Problems and Solutions". Systematic Biology. 50 (5): 689–699. doi:10.1080/106351501753328811. ISSN 1076-836X. PMID 12116939.
- Grand, Anaïs; Corvez, Adèle; Duque Velez, Lina Maria; Laurin, Michel (2001). "Phylogenetic inference using discrete characters: performance of ordered and unordered parsimony and of three-item statements". Biological Journal of the Linnean Society. 110 (4): 914–930. doi:10.1111/bij.12159. ISSN 0024-4066.
- Rineau, Valentin; Grand, Anaïs; Zaragüeta, René; Laurin, Michel (2015). "Experimental systematics: sensitivity of cladistic methods to polarization and character ordering schemes". Contributions to Zoology. 84 (2): 129–148. doi:10.1163/18759866-08402003. ISSN 1875-9866.
- Rineau, Valentin; Zaragüeta, René; Laurin, Michel (2018). "Impact of errors on cladistic inference: simulation-based comparison between parsimony and three-taxon analysis". Contributions to Zoology. 87 (1): 25–40. doi:10.1163/18759866-08701003. ISSN 1875-9866.
- Bremer K (July 1988). "The limits of amino acid sequence data in angiosperm phylogenetic reconstruction". Evolution; International Journal of Organic Evolution. 42 (4): 795–803. doi:10.1111/j.1558-5646.1988.tb02497.x. PMID 28563878. S2CID 13647124.
- Bremer KR (September 1994). "Branch support and tree stability". Cladistics. 10 (3): 295–304. doi:10.1111/j.1096-0031.1994.tb00179.x. S2CID 84987781.
- Brower AV, Garzón-Orduña IJ (April 2018). "Missing data, clade support and "reticulation": the molecular systematics of Heliconius and related genera (Lepidoptera: Nymphalidae) re‐examined". Cladistics. 34 (2): 151–66. doi:10.1111/cla.12198.
- Day WH (1987). "Computational complexity of inferring phylogenies from dissimilarity matrices". Bulletin of Mathematical Biology. 49 (4): 461–7. doi:10.1016/S0092-8240(87)80007-1. PMID 3664032.
- Puttick, Mark N.; O'Reilly, Joseph E.; Tanner, Alastair R.; Fleming, James F.; Clark, James; Holloway, Lucy; Lozano-Fernandez, Jesus; Parry, Luke A.; Tarver, James E.; Pisani, Davide; Donoghue, Philip C. J. (2017). "Uncertain-tree: discriminating among competing approaches to the phylogenetic analysis of phenotype data". Proceedings of the Royal Society B: Biological Sciences. 284 (1846): 20162290. doi:10.1098/rspb.2016.2290. ISSN 0962-8452. PMC 5247500. PMID 28077778.
- O'Reilly, Joseph E.; Puttick, Mark N.; Parry, Luke; Tanner, Alastair R.; Tarver, James E.; Fleming, James; Pisani, Davide; Donoghue, Philip C. J. (2016). "Bayesian methods outperform parsimony but at the expense of precision in the estimation of phylogeny from discrete morphological data". Biology Letters. 12 (4): 20160081. doi:10.1098/rsbl.2016.0081. ISSN 1744-9561. PMC 4881353. PMID 27095266.
- Goloboff, Pablo A.; Torres, Ambrosio; Arias, J. Salvador (2018). "Weighted parsimony outperforms other methods of phylogenetic inference under models appropriate for morphology". Cladistics. 34 (4): 407–437. doi:10.1111/cla.12205. ISSN 0748-3007.
- Garwood, Russell J; Knight, Christopher G; Sutton, Mark D; Sansom, Robert S; Keating, Joseph N (2020). "Morphological Phylogenetics Evaluated Using Novel Evolutionary Simulations". Systematic Biology. 69 (5): 897–912. doi:10.1093/sysbio/syaa012. ISSN 1063-5157. PMC 7440746. PMID 32073641.
- Goloboff, Pablo A.; Pittman, Michael; Pol, Diego; Xu, Xing (2019). "Morphological data sets fit a common mechanism much more poorly than DNA sequences and call into question the Mkv model". Systematic Biology. 68 (3): 494–504. doi:10.1093/sysbio/syy077. ISSN 1076-836X. PMID 30445627. S2CID 53567539.
- Rindal E, Brower AV (2011). "Do model-based phylogenetic analyses outperform parsimony? A test with empirical data". Cladistics. 27: 331–4. doi:10.1111/j.1096-0031.2010.00342.x. S2CID 84907350.
- Kolaczkowski B, Thornton JW (October 2004). "Performance of maximum parsimony and likelihood phylogenetics when evolution is heterogeneous". Nature. 431 (7011): 980–4. Bibcode:2004Natur.431..980K. doi:10.1038/nature02917. PMID 15496922. S2CID 4385277.
- Catanzaro, Daniele (2010). Estimating phylogenies from molecular data, in Mathematical approaches to polymer sequence analysis and related problems. Springer, New York.
- Catanzaro D (2009). "The minimum evolution problem: Overview and classification". Networks. 53 (2): 112–125. doi:10.1002/net.20280.
- Rzhetsky A, Nei M (1993). "Theoretical foundations of the minimum evolution method of phylogenetic inference". Molecular Biology and Evolution. 10: 21073–1095.
- Desper R, Gascuel O (March 2004). "Theoretical foundation of the balanced minimum evolution method of phylogenetic inference and its relationship to weighted least-squares tree fitting". Molecular Biology and Evolution. 21 (3): 587–98. doi:10.1093/molbev/msh049. PMID 14694080.