Novolac

Novolak

Novolak

Lightweight aldehyde- and phenol-derived polymer

Novolaks (sometimes: novolacs) are low molecular weight polymers derived from phenols and formaldehyde. They are related to Bakelite, which is more highly crosslinked. The term comes from Swedish "lack" for lacquer and Latin "novo" for new, since these materials were envisioned to replace natural lacquers such as copal resin.

Segment of novolak, illustrating the predominance of cresol subunits and presence of crosslinking.

Typically novolaks are prepared by the condensation of phenol or a mixture of p- and m-cresol with formaldehyde (as formalin). The reaction is acid catalyzed. Oxalic acid is often used because it can be subsequently removed by thermal decomposition. Novolaks have a degree of polymerization of approximately 20-40. The branching density, determined by the processing conditions, m- vs p-cresol ratio, as well as CH2O/cresol ratio is typically around 15%.[1]

Novolaks are especially important in microelectronics where they are used as photoresist materials.[2][3] They are also used as tackifiers in rubber.

See also

References

  1. [1]
    Ralph Dammel (1993). "Basic Chemistry of Novolaks". Diazonaphthoquinone-based Resists. Int. Soc. Optical Engineering. ISBN 9780819410191.
  2. [2]
    Hinsberg, W. D.; Wallraff, G. M. (2005). "Lithographic Resists". Kirk-Othmer Encyclopedia of Chemical Technology. New York: John Wiley. doi:10.1002/0471238961.1209200808091419.a01.pub2. ISBN 9780471238966.
  3. [3]
    Integrated Laboratory Systems (January 2006). Chemical Information Review Document for Diazonaphthoquinone Derivatives Used in Photoresists (PDF) (Report). National Toxicology Program.
Share this article:

This article uses material from the Wikipedia article Novolac, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.