Rayleigh_interferometer

Rayleigh interferometer

Rayleigh interferometer

Add article description

In optics, a Rayleigh interferometer is a type of interferometer which employs two beams of light from a single source. The two beams are recombined after traversing two optical paths, and the interference pattern after recombination allows the determination of the difference in path lengths.[1]

Rayleigh interferometer at the National Bureau of Standards

Principle of Operation

Collimated coherent light passing through two tubes with different refraction index gases, then an imaging lens creates the interferogram.

Light from a source (left) is collimated by a lens and split into two beams using slits. The beams are sent through two different paths and pass through compensating plates. They are brought to a focus by a second lens (bottom) where an interference pattern is observed to determine the optical path difference in terms of wavelengths of the light.

Advantages and disadvantages

The advantage of the Rayleigh interferometer is its simple construction. Its drawbacks are (i) it requires a point or line source of light for good fringe visibility, and (ii) the fringes must be viewed with high magnification.[2]

See also

References

  1. [1]
    Busch, Kenneth W. (1990). "ยง6.6.5 The Rayleigh interferometer". Multielement detection systems for spectrochemical analysis. New York: Wiley. p. 231. ISBN 0-471-81974-3.
  2. [2]
    Hariharan, P. (2007). Basics of interferometry (2nd ed.). Amsterdam: Elsevier Academic Press. p. 15. ISBN 978-0123735898.
Share this article:

This article uses material from the Wikipedia article Rayleigh_interferometer, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.