Supply chain financing (or reverse factoring) is a form of financial transaction wherein a third party facilitates an exchange by financing the supplier on the customer's behalf. The term also refers to practices used by banks and other financial institutions to manage capital invested into the supply chain and reduce risk for the parties involved.^[1]

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article needs additional citations for verification. (February 2014) This article contains content that is written like an advertisement. (March 2024) This article is written like a story. (March 2024)

Unlike traditional factoring (where a supplier wants to finance its receivables), supply chain financing is initiated by the ordering party (the customer) in order to help its suppliers to finance its receivables more easily and at a lower interest rate than what would normally be offered. The technique has been used in wealth management schemes to defraud investors, for example by the second largest Chinese real estate company, Evergrande Group.^[2]

In 2011, the reverse factoring market was still very small, accounting for less than 3% of the factoring market.^{[citation needed]}

The reverse factoring method, still rare, is similar to the factoring insofar as it involves three actors: the ordering party (customer), the supplier, and the factor. Just as basic factoring, the aim of the process is to finance the supplier's receivables by a financier (the factor), so the supplier can cash in the money for what they sold immediately (minus an interest the factor deducts to finance the advance of money)^{[citation needed]}.

Contrary to the basic factoring, the initiative is not from the supplier that would have presented invoices to the factor to be paid earlier. This time, it is the ordering party (customer) that starts the process – usually a large company – choosing invoices that they will allow to be paid earlier by the factor. And then, the supplier will themselves choose which of these invoices he will need to be paid by the factor. It is therefore a collaborative project between the ordering party, the supplier and the factor^{[citation needed]}.

Because it is the ordering party that starts the process, it is their liability that is engaged and therefore the interest applied for the deduction is less than the one the supplier would have been given had they done it on their own. The ordering party will then benefit of a part of the benefit realized by the factor, because they are the one to allow this. And the financier for their part will make their profit and create a durable relation with both the supplier and the ordering party^{[citation needed]}.

Reverse factoring is an effective cash flow optimization tool for companies outsourcing a large volume of services (e.g. clinical research activities by Pharmaceutical companies^[3]). The benefit to both parties is that the company providing the services can get the outstanding value of their invoices paid in 10 days or less vs. the normal 30- to 45-day payment terms while the ordering party can delay the actual payment of the invoices (which are paid to the bank) by 120–180 days thus increasing cash flow. After the initial period of cash flow optimization, it is unclear if this will remain of value to the ordering party because you will then be paying monthly invoices of approximately equal amounts assuming your outsourced services are stable/average across the year/future periods. The cost of the "money" is a set interest rate normally tied to an index plus a bps adjustment^{[citation needed]}.

To understand how reverse factoring works, one needs to be familiar with trade discounts and factoring. Reverse factoring can be considered a combination of these two methods, taking advantages of both in order to redistribute the benefits to all three actors. There are 8 individual aspects of those three financing methods:

The concept of reverse factoring started with automobile constructors - including Fiat in the 1980s - who used this kind of financing process for its suppliers in order to realise a better margin. The principle then spread to the retail industry because of the interest it represents for a sector where payment delays are at the heart of every negotiation.^{[citation needed]}

In the 1990s and the early 2000s, reverse factoring was not used extensively due to economic contexts that did not allow it to be an efficient way of financing. ^{[citation needed]}

In 2021, the second largest Chinese real estate company, Evergrande Group defaulted. It had used retail financial investments to plug its funding gaps, raising billions of US dollars through wealth management products to repay other wealth product investors. The products sold were highly risky. Referred to as a type of "supply chain finance", investors would invest money in shell companies they falsely believed existed to supplement working capital. As sales of the products fell, their business model became unsustainable.^[2]

With the supply chain lengthening as a result of globalization and offshore production, many companies have experienced a reduction of capital availability. In addition, the pressure faced by companies to improve cash flow has resulted in increased pressure on their overseas suppliers. Specifically, suppliers receive pressure in the form of extended payment terms or increased working capital imposed on them by large buyers. The general trend toward open account from letters of credit has further contributed to the problem.^{[citation needed]}

As a result, global supply chain finance (GSCF) was born with global market opportunity. The total worldwide market for receivables management is US$1.3 trillion. Payables discounting and asset-based lending add an additional US$100 billion and $340 billion, respectively . Only a small percentage of companies are currently using supply chain finance techniques, but more than half have plans or are investigating options to improve supply chain finance techniques. The market for supply chain finance has grown by 35% in volume in 2020 compared to 2019 reaching US$1,311bn. The amount of funds in use as at the end of 2020 was estimated at US$505bn, an increase of 42%.^[5]

While buyers are extending payment terms to their suppliers, the suppliers often have limited access to short-term financing and, therefore, a higher cost of money. This cost-shifting to suppliers results in a financially unstable and higher-risk supply base. Overall, the benchmark report^[which?] showed that companies could be pursuing three key areas: GSCF financing, GSCF technology and GSCF visibility.^{[citation needed]}

Given the competitive nature of the GSCF market (approved payable finance) and due to the fact that business undertaken is covered by customer and bank confidentiality, sources of information regarding market size and players are constrained and not widely available in the public domain. As a result, indications on the market size are based mainly on estimates. The current, global market size for Supply Chain Finance is estimated at US$275 billion^[6] of annual traded volume, which translates in approximately $46 billion in outstandings with an average of 60 days payment terms. It is still relatively small compared to the market size of other invoice finance methods such as factoring, which remains the largest trade finance segment and is primarily domestic in focus. The potential market for Supply Chain Finance for the OECD (Organization for Economic Co-operation and Development) countries is significant and is estimated at $1.3 trillion^[7] in annual traded volume. The market serving European supply chains is approximately $600 billion.^[8] Based on these figures, the potential Supply Chain Finance market size for the US is estimated to be approximately $600 billion in traded volume per annum.^[9] A recent comprehensive research paper^[10] estimated that currently there are 200 GSCF programs of scale in place. These programs are run both domestically and cross-border and in multiple currencies. Still, the market potential is far from its capacity. If examining spending of large organizations, such as Lowe's $33 billion in spend, it becomes apparent that Supply Chain Finance programs usually require a multi-bank platform due to the credit and capital issues associated with banks.^[11]

In 2011, the reverse factoring market was still very small, accounting for less than 3% of the factoring market.^{[citation needed]} As of 2013, Market experts estimated that only 10% of the global available marketplace had been "satisfied" with supply chain finance, revealing a large potential market for growth. The market was expected to continue to expand at a rate of approximately 20-30% per annum and 10% per annum by 2020.^[12] The highest growth of supply chain finance programs currently^[when?] originates from the US and Western Europe. Asia - India and China in particular, are considered the markets with most potential in the coming years. The driving forces behind the rapid growth of supply chain finance programs are: Globalisation has increased the risk in supply chains and the impact on the financials of corporations. Working Capital Management has risen at the top of the CFOs’ and Treasurers’ agendas. Strong interest from suppliers regarding the provision of liquidity and enabling lower financing costs.^{[citation needed]}

This section does not cite any sources. (March 2024)

Although Supply Chain Finance is experiencing significant growth in demand, financial institutions are focused mainly on the large buyer side of the trade equation. As structured finance has been traditionally engineered and provided by banks specifically for large international trading companies, they do not use common foundations. In order for Supply Chain Finance to take off on a broad scale, a fresh impetus is needed. A “tipping point” could easily be reached by solving the following challenges.

• On-boarding of Supplier. In a Supplier Financing program, the servicer needs to on board the buyer’s trading partners - the suppliers. The multitude of such platforms generates operational issues for suppliers wishing to benefit from various Supply Chain Finance offerings via their buyers’ funders.
• Know-Your-Customer (KYC). Most funders require KYC checks to be performed on suppliers being enlisted as new trading partners. This procedure not only increases the total processing cost, but it also puts the business case for all parties including the service provider, funder, buyer and ultimately the supplier at risk.
• Available Capital and Liquidity. With 90% of liquidity in Supply Chain Finance programs provided by large, global commercial banks, there is a large amount of trade assets, which cannot be covered by such financial institutions. Further regulations such as Basel III might impact the risk appetite and funding capacity of banks and make it more attractive for non-bank funders to step in and support Supply Chain Finance facilities. Limited to large buyers. Today’s Supply Chain Finance offerings are mainly addressing the large buyers with sound credit ratings whereas the real Supply Chain Finance opportunity extends to large suppliers too, in particular in terms of payment assurance and risk mitigation.
• Proprietary legal documentation. Current Supply Chain Finance offerings use proprietary legal documentation, which makes the signing of non-standard agreements a costly, complex and time consuming process for corporate clients and their suppliers. Therefore, the market is currently facing challenges related to the absence of interoperability and legal standards.
• Standardized product definitions. The naming and definitions of the various Supply Chain Finance methods vary between suppliers, which makes it difficult for corporations to compare offerings and consider switching from one provider to another.

This section does not cite any sources. (March 2024)

Physical and informational control are the keys to a GSCF. There is a need for logistics providers and financial services firms to join together to develop precise visibility tools that provide CFOs and global supply chain managers with the data they need and lenders with the collateral security required to provide capital. Once a robust information-based system is established, trading partners, logistics companies, and banks need to be able to access the information quickly and efficiently.

The starting point for information about goods being transported must be the entity that is transporting the goods – the supply chain services provider, transportation company, and/or logistics partner. These are the entities that have the physical control of the goods while in the supply chain. Access to this information is a must from a demand planning perspective. Knowing where the goods are in transit, the financial services provider can more confidently extend financing at various milestones within the supply chain.

There is a critical role missing in this equation, however, and that is the supply chain finance “translator” – the entity that is experienced in both logistics/transportation and financial services. The translator is the subject matter expert, if you will, that can bring all entities to the table – transportation and logistics; banks; buyers; and sellers and speak the various languages and understand the needs of each party. In addition to participating in the financial transaction, the translator can help bridge the information divide between the physical and financial worlds, providing critical analysis about the information being collected from the supply chain.

The following table explains this translator role:

This section does not cite any sources. (March 2024)

Some of the products that could be sold under the banner of Global Supply Chain Financing include, but are not limited to: 1.) Global asset-based lending (GABL) – Enables middle market companies to monetize off-shore or in-transit inventory. This results in increased liquidity to this class of borrower, 2.) Inventory finance – Enables companies that supply to large buyers to secure financing on inventory that they are required by buyers to hold. This results in an improvement in the net cash conversion cycle for the buyer while providing the supplier with capital at a reduced rate. 3.) Receivables management services – Provides third-party outsourcing of receivables management and collections process. It also provides financing of those receivables and guarantees on the payment of those receivables. 4.) Payables discounting -Provides third-party outsourcing of the payables process and leverages a buyer’s credit quality to obtain favorable financing rates for suppliers. This results in lower cost of capital for the supplier, a portion of which can be passed on to the buyer. 5) Insurance – Further mitigates trade risk through cargo, credit, and transaction dispute insurance.

Traditionally, dynamic payables discounting, the early payment of trade payables in advance of the invoice due date, has been only related to invoices that are already approved. Given these discounted payments are paid post-goods receipt and approval, they don't carry any transaction risk which is common in cross border trade. Given the complexities of modern financing and payment techniques, invoicement including invoice automation and discount management initiatives need a framework to ensure that programs are approached on a strategic basis which bridges the supply chain, purchasing, accounts payable and finance organizations. Examples of providers are Misys TI Plus, TradeCard, Demica and Manhattan Associates.

More recently,^[when?] there has been a pivot back to Receivables Financing Factoring (finance) programs, primarily driven by enhancements in technology which has increased the efficiency and attractiveness of Receivables-based programs. In a Supplier Financing model there is a heavy administrative burden caused by the need to negotiate Receivables Purchase Agreements with each individual Supplier, whereas in Factoring (finance) programs only one RPA is required with the Vendor. In addition, traditionally there was a larger effort involved in calculating the Funders credit risk exposure in a Receivables-based program due to the many Buyers which needed to be credit evaluated on an ongoing basis. Technology has now automated much of the credit evaluation process allowing program Funders access to real-time Buyer risk ratings across their portfolio. This transparency generates increased credit appetites from program Funders and Credit Insurers and benefits the Vendor through attractive rates and increased program credit limits on their Buyers. Vendors can also use the receivables-based approach to increase competitiveness by extending payment terms to their Buyers Off-balance-sheet. Examples of providers include Global Supply Chain Finance Ltd.

This section does not cite any sources. (March 2024)

Supply Chain Finance practices have been in place for over a decade. Three distinctive Supply Chain Finance structures have crystallized.

• Buyer managed platforms. In this structure the buyer owns and runs the Supply ChainFinance platform. Some large retailers such as Carrefour or Metro Group are using this structure and managing the finance program, supplier onboarding, and liquidity themselves.
• Bank proprietary platforms. The Supply Chain Finance structure is managed by large commercial banks providing the technology platform, services and funding. This structure is used by several large buying organizations such as Carlsberg, Boeing, Marks & Spencer and Procter & Gamble.
• Multi-bank platforms. The structure that has exhibited the strongest growth rate is represented by independent third party supply chain finance providers offering multi-bank platforms. This structure separates the entities, which manage the platform – a specialised service provider, from the funding partner, which provides liquidity and takes the credit risk. Based on the fact that funding in Supply Chain Finance is uncommitted, no bank can fund in every jurisdiction or currency and due to the general limitations in terms of credit risk appetite and funder concentration risk.
• Market share. In terms of market share, programs are serviced and funded by a handful of players including large commercial banks. Together they manage over 40% of the market share. The rest of the Supply Chain Finance is serviced and funded by a variety of local banks and smaller, independent service providers.

Often the reverse factoring is used with the dematerialization to speed the process. As the whole goal of it is to make money available to the supplier as fast as possible, a lot of companies decide to dematerialize their invoices when they start a reverse factoring system, because that way it saves few more days, plus all the advantages of the dematerialization (less expensive, and benefic to the environment). In average, it can shorten the delays by 10 to 15 days.

• Financial deregulation
• Paperless office