The ride cymbal is a standard cymbal in most drum kits. It maintains a steady rhythmic pattern, sometimes called a ride pattern, rather than the accent of a crash. It is normally placed on the extreme right (or dominant hand) of a drum set, above the floor tom.
The ride can fulfill any function or rhythm the hi-hat does, with the exception of an open and closed sound.
The ride is played with a drumstick.
The term ride means to ride with the music, describing the cymbal's sustain after it is struck. The term may depict either the function or characteristic of the instrument. Most cymbal makers manufacture specific cymbals for the purpose.
Some drummers use a china cymbal, a sizzle cymbal or a specialized tone such as a swish or pang cymbal as a ride cymbal. When playing extremely softly, when using brushes, and when recording, even a thin crash may serve well as a ride cymbal.
On the other extreme, when playing extremely loudly, a cymbal designed as a ride may serve well as a very loud, long crash.
Cymbals designated crash/ride or more rarely ride/crash serve as either a large slow crash or secondary ride, or in very small kits as the only suspended cymbal.
Bell-less ride cymbals, known as flat rides, have a dry crash and clear stick definition. Quieter, they are popular in jazz drumming. Developed by Paiste in the 1960s, flat rides are used by notable drummers Roy Haynes, Jack DeJohnette, Paul Wertico, Carter Beauford, Jo Jones and Charlie Watts.
The highly regarded Paiste 602 Flat Ride was reissued in 2010, but is only available in 20" medium.
Swish and pang
Modern use of the ride cymbal was inspired by Baby Dodds's press roll rhythms.
When struck, a ride cymbal makes a sustained, shimmering sound rather than the shorter, decaying sound of a crash cymbal. The most common diameter for a ride cymbal is about 20 inches (51 cm), but anything from 18 inches (46 cm) to 22 inches (56 cm) is standard. Smaller and thinner cymbals tend to be darker with more shimmer, while larger and thicker cymbals tend to respond better in louder volume situations, and conversely. Rides of up to 26 inches (66 cm) and down to 16 inches (41 cm) are readily available, and down to 8 inches (20 cm) are currently manufactured. The very thickest and loudest tend to be about 22 inches, with larger rides restricted to medium and medium thin thicknesses.
|Component||Content||Audio (Ogg Vorbis)|
|Ride||Hit on the bow||61 KB (help·info)|
|Hit on the bell of the cymbal||71 KB (help·info)|
|Hit on the rim||67 KB (help·info)|
|See the Drums page at Wikimedia Commons for more|
In rock or jazz, the ride cymbal is most often struck regularly in a rhythmic pattern as part of the accompaniment to the song. Often the drummer will vary between the same pattern either on the hi-hat cymbal or the ride cymbal, playing for example the hi-hat in the verses and the ride in the instrumentals and/or choruses.
The sound of a ride cymbal also varies depending on what kind of mallet is used to hit it. In rock and metal, wood and nylon-tipped drum sticks are common; wood creates a smoother, quieter sound, whereas nylon tips create more of a "ping". It creates a low vibration to keep a steady beat, but a low sound volume. The bell, the bulge in the center of the cymbal, creates a brighter, less sustained sound. The bell creates such a brilliant tone compared to the subtle sound of the bow that it is often used as somewhat of another cymbal. Some ride cymbals, seen more often in various forms of metal and harder subgenres of rock, have an unusually large bell. This lessens the accuracy required to repeatedly hit the bell in fast patterns, and produces a louder, brighter tone than in most ride-cymbal bells.
- Schroedl, Scott (2001). Play Drums Today!, p.7. Hal Leonard. ISBN 0-634-02185-0. "It's called the ride cymbal because you 'ride' on it--that is, you maintain a steady pattern."
- Peckman, Jonathan (2007). Picture Yourself Drumming, p.195. ISBN 1-59863-330-9.
- Schroedl, Scott (2001). Play Drums Today!, p.9. Hal Leonard. ISBN 0-634-02185-0.
- "Warren 'Baby' Dodds". The Percussive Arts Society. Retrieved 2017-12-18.
Dodds' way of playing press rolls ultimately evolved into the standard jazz ride-cymbal pattern. Whereas many drummers would play very short press rolls on the backbeats, Dodds would start his rolls on the backbeats but extend each one to the following beat, providing a smoother time flow.