Rohri–Chaman Railway Line (Urdu: روہڑی–چمن مرکزی ریل راستہ) (also referred to as Main Line 3 or ML-3) is one of four main railway lines in Pakistan, operated and maintained by Pakistan Railways. The line begins from Rohri Junction station and ends at Chaman station. The total length of this railway line is 526 kilometers (327 mi). There are 38 railway stations from Rohri Junction to Chaman on this line and is famous for passing through the historic Bolan pass. This line incorporates part of the historic Sind–Pishin State Railway.

Quick Facts Rohri–Chaman Railway Line روہڑی–چمن مرکزی ریل راستہ, Overview ...

Rohri–Chaman Railway Line روہڑی–چمن مرکزی ریل راستہ
Overview
Other name(s)	Main Line 3 ML-3[1]
Owner	Pakistan Railways
Line number	3
Termini	Rohri Junction Chaman
Stations	38
Service
Operator(s)	Pakistan Railways
History
Opened	6 October 1879; 144 years ago (1879-10-06)
Technical
Line length	526 km (327 mi)
Track gauge	1,676 mm (5 ft 6 in)
Operating speed	105 km/h (65 mph) (Current) 160 km/h (99 mph) (Proposed)[2]
Route map Legend km 0 Rohri Junction Indus river Ayub Bridge Bukkur 5 Sukkur 11 Arian Road 18 Gosarji Kotri–Attock Line to Kotri 33 Habib Kot Junction 43 Shikarpur 57 Sultankot 72 Abad Kotri–Attock Line to اٹک Larkana–Jacobabad Light Railway to Larkana 84 Jacobabad Junction provincial border Sindh Baluchistan 97 Dera Allahyar 101 Mangoli 121 Dera Murad Jamali 135 Shori 148 Nuttall 175 Bakhtiarabad Domki 187 Damboli 210 Dingra 231 Perak 243 Sibi Kandahar State Railway to Zardalu 251 Nari Bank 259 Mushkaf several tunnels including Mushkaf tunnel 268 Pehro Kunri 283 Panir several tunnels including Panir tunnel 298 Peshi 306 Chidarzai (abandoned) 306 Ab-I-Gum 318 Mach 331 Hirok 336 Dozan 343 Kolpur Kolpur tunnel height 2,087 m (6,847 ft) 359 Spezand Junction Quetta–Taftan Line to Koh-e-Taftan 374 Sar-I-Ab 384 Quetta 391 Sheikh Mandah 396 Beleli 406 Kuchlak 417 Bostan Junction Zhob Valley Railway to Zhob 429 Yaru 466 Gulistan 479 Kila Abdulla 496 Shelabagh Khojak Tunnel length 3.91 km (2.43 mi) 507 Sanzala 526 Chaman km

Close

Originally named the Sind–Pishin State Railway, this strategic railway line was constructed by the Scinde, Punjab & Delhi Railway. Construction began in 1879 and was completed in 1887, which by then was part of the North Western State Railway. Quetta was always considered as an important strategic destination by the British Raj, as they feared the Russian Empire could advance from Afghanistan into Quetta, thereby threatening its rule in South Asia.^[3] On 6 October 1879, work on the first section from Ruk (now Rohri) to Sibi (at the entrance of the Nari Pass) and was completed by 14 January 1880. The track had been laid in 101 days across the water less desert by 5000 men and their animals. In 1880, orders were issued for the line to be extended from Sibi to Quetta and onward to Pishin via the Harnai Pass and would become known as the Kandahar State Railway. It was initially thought that the Harnai pass was more suitable for broad gauge than the Bolan Pass. In 1883, construction began in secret and known in public as the "Harnai Road Improvement Scheme". From Sibi, the line ran southwest, skirting the hills to Rindli and originally followed the course of the Bolan stream to its head on the plateau. By February 1884, the line had only reached Zardalu. The tough terrain as well as the destructive action of floods led to the abandonment of this alignment. A new extension was thus proposed from Sibi through the Mashkaf Valley and Bolan Pass to Quetta and onward to Chaman in 1885. The line reached Quetta in March 1887, and reached Chaman in January 1892. The section between Khojak and Chaman required the construction of the longest railway tunnel in the North Western State Railway system.

The stations on this line are as follows:

• Karachi–Peshawar Railway Line
• Railway lines in Pakistan