Shanghai_Yangtze_River_Tunnel_and_Bridge

Shanghai Yangtze River Tunnel and Bridge

Shanghai Yangtze River Tunnel and Bridge

Fixed link between Chongming Island and Pudong, eastern China


The Shanghai Yangtze River Tunnel and Bridge is a bridge–tunnel complex across the south fork of the Yangtze River near the river mouth in Shanghai. The tunnel connects the Pudong District of Shanghai on the south bank of the river with Changxing Island, while the bridge connects Changxing Island with Chongming Island. In combination with the Chongqi Bridge (opened in December 2011), which connects Chongming Island to the north bank of the Yangtze, the bridge–tunnel complex forms the final crossing of the Yangtze before it empties into the East China Sea.

Quick Facts Simplified Chinese, Traditional Chinese ...

The bridge and tunnel were built from 2005 to 2009 at a cost of 12.6 billion yuan (US$1.84 billion),[1] and opened on 31 October 2009.[1][2] Their combined length is 25.5 km (15.8 mi), forming part of the G40 Shanghai–Xi'an Expressway.

Tunnel

Quick Facts Overview, Location ...

The Shanghai Yangtze River Tunnel starts on the south bank of the Yangtze at Wuhaogou, Pudong and ends in the south of Changxing Island. It is 8.9 kilometres (5.5 mi) in length,[1] and has two stacked levels. The upper level is for a motorway, and has three lanes in each direction, with a designed speed of 80 kilometres per hour (50 mph). The lower level is reserved for a future Shanghai Metro line, Chongming Line.

The tunnelling was completed using four tunnel boring machines, the largest of which was 15.43 metres (50.6 ft) in diameter,[3] 135 metres (443 ft) long,[citation needed] and weighed 2,300t.[citation needed]

Bridge

Quick Facts Coordinates, Crosses ...

The Shanghai Yangtze River Bridge starts at the tunnel exit, crosses Changxing Island at ground level, then crosses to Chongming Island, ending at Chenjia Town.

It consists of two long viaducts with a higher cable-stayed section in the middle to allow the passage of ships. The total length is 16.63 kilometres (10.33 mi), of which 6.66 kilometres (4.14 mi) is road and 9.97 kilometres (6.20 mi) bridge. The overall shape of the bridge is not linear but slightly sigmoid (S-shaped).

The central cable-stayed span is about 730 metres (2,395 ft), the longest span of any bridge in Shanghai, and the tenth longest cable-stayed span in the world.[citation needed] The span arrangement is 92+258+730+258+72 m.[4]

The bridge has three road lanes in each direction, with a designed speed of 100 kilometres per hour (62 mph). Room on both flanks of the bridge is reserved for a future metro line, line 19, so total deck width is 35.3 m (115.8 ft).[4]

The bridge under construction, 2008

See also


References

  1. "世界最大隧桥上海长江大桥31日通车(组图) (The largest bridge–tunnel project in the world, the Shanghai Yangtze River Tunnel and Bridge opens on 31st (multiple pictures))" (in Chinese). Tencent QQ.com News. 31 October 2009. Retrieved 1 January 2010.

Share this article:

This article uses material from the Wikipedia article Shanghai_Yangtze_River_Tunnel_and_Bridge, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.