The Model 14 Masterpiece Single-Action was available in 1961 and 1962.[2] It came with a 6 in (150 mm) barrel and functioned in single-action only. It was otherwise identical to the rest of the Model 14s.
Smith & Wesson also released a Model 14 in their "Classics" line. A nickel-plated version[3] has since been discontinued, but the blued-steel version[4] is still available. Other than the finishes, the revolvers were identical with 6 in (150 mm) barrels, a pinned Patridge front sight, a micro-adjustable rear sight, and wood grips.
During the years 1965 - 1968 a serial number range of the Model 14-2 was acquired by the Dayton Gun Headquarters of Dayton, Ohio. Smith and Wesson allowed this gun distributor to block a number of serial numbers for a special run of 14-2 handguns. These handguns were distinctive in that they were all Model 14-2, 4-inch revolvers with a Baughman front sight and a mixture of standard or target hammers, triggers and stocks. The "Dayton" guns are a hybrid involving a shortened Model 14 barrel with a Model 15 sight. The Dayton guns were made in four separate blocks of serial numbers. They are: 1) K623337 - K623737 (401 pieces); 2) K623857 - K624496 (640 pieces); 3) K660288 - K661087 (800 pieces); 4) K661389 - K 661585 (197 pieces) for a total of 2038 pieces; during years 1965-1968.[5]
Besides the aforementioned "Dayton Guns" and as noted in the beginning of this article, other 4-inch barreled models were produced. Specifically a group of these revolvers were ordered with 4-inch barrels for the Kansas City, Missouri Police Commission. This information has been verified through Smith and Wesson Archive letters of authenticity. These revolvers were slightly different having a standard barrel thickness as opposed to the heavy barrels displayed on the "Dayton Guns". “Bill Jabin notation”