Sodium_fusion_test

Sodium fusion test

Sodium fusion test

Add article description

The sodium fusion test, or Lassaigne's test, is used in elemental analysis for the qualitative determination of the presence of foreign elements, namely halogens, nitrogen, and sulfur, in an organic compound. It was developed by J. L. Lassaigne.[1]

The test involves heating the sample with sodium metal, "fusing" it with the sample. A variety of techniques has been described. The "fused" sample is plunged into water, and the qualitative tests are performed on the resultant solution for the respective possible constituents.[2][3]

Theory

The halogens, nitrogen, and sulfur are covalently bonded to the organic compounds are converted to various sodium salts formed during the fusion. Typically proposed reactions are:

Na + C + N → NaCN
Na + C + N + S → NaSCN
2Na + S → Na2S
Na + X → NaX

The fate of the hydrocarbon portion of the sample is disregarded.

The aqueous extract is called sodium fusion extract or Lassaigne's extract.

Test for nitrogen

The sodium fusion extract is made alkaline by adding NaOH. To this mixture, freshly prepared FeSO4 solution is added and boiled for sometimes and then cooled. A few drops of FeCl3 are added and Prussian blue (bluish green) color forms due to formation of ferric ferrocyanide along with NaCl. This shows the presence of nitrogen in the organic compound.[4]

Test for sulfur

Lead acetate test

The sodium fusion extract is acidified with acetic acid and lead acetate is added to it. A black precipitate of lead sulfide indicates the presence of sulfur.

Sodium nitroprusside test

Freshly prepared sodium nitroprusside solution is added to the sodium fusion extract, turning the solution deep violet due to formation of sodium thionitroprusside.[4]

In case, both nitrogen and sulfur are present in an organic compound, sodium thiocyanate is formed which gives blood red color since there are no free cyanide ions.

Test for halogens

The sodium fusion extract is boiled with concentrated HNO3 followed by the addition of AgNO3 solution which yields a white (AgCl) or yellow (AgBr or AgI) precipitate if halogen is present.[4]

Test for phosphorus

Sodium peroxide is added to the compound to oxidise phosphorus to sodium phosphate. It is boiled with concentrated HNO3 and then ammonium molybdate is added. A yellow precipitate (ammonium phosphomolybdate) indicates the presence of phosphorus.[5]

References

  1. [1]
    Lassaigne (1843) "Mémoire sur un procédé simple pour constater la présence de l'azote dans des quantités minimes de matière organique" [Memoir on a simple procedure for confirming the presence of nitrogen in minimal quantities of organic matter], Comptes rendus,16 : 387-391.
  2. [2]
    Gower, R. P.; Rhodes, I. P. (1969). "A review of techniques in the Lassaigne sodium-fusion". Journal of Chemical Education. 46 (9): 606. Bibcode:1969JChEd..46..606G. doi:10.1021/ed046p606.
  3. [3]
    Gower, R. P.; Rhodes, I. P. (1969). "A Review of Techniques in the Lassaigne Sodium-Fusion". Journal of Chemical Education. 46 (9): 606. Bibcode:1969JChEd..46..606G. doi:10.1021/ed046p606.
  4. [4]
    Tucker, S. Horwood (1945-05-01). "A lost centenary: Lassaigne's test for nitrogen. The identification of nitrogen, sulfur, and halogens in organic compounds". Journal of Chemical Education. 22 (5): 212. Bibcode:1945JChEd..22..212T. doi:10.1021/ed022p212. ISSN 0021-9584.
  5. [5]
    "Lassaigne's Test - Test for Nitrogen, Sulphur, Halogens with Examples". BYJU'S.
Stub icon

This article about analytical chemistry is a stub. You can help Wikipedia by expanding it.
Share this article:

This article uses material from the Wikipedia article Sodium_fusion_test, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.