Tellurium_Copper

Tellurium copper

Tellurium copper

Add article description

For binary compounds of copper and tellurium, see Copper telluride.

Tellurium copper is an alloy of copper and tellurium. Tellurium improves the machinability of copper.

Overview

Tellurium is usually added to copper to improve machinability ("free cutting"). ASTM specification B301 has 0.5% tellurium; at concentrations of up to 0.75% machinability is improved while electrical conductivity and hot working behavior is maintained. Mechanical properties are similar to tough pitch copper, while machinability is similar to brass - the hardness of the alloy is increased by precipitation of the copper telluride: weissite.[1]

Tellurium copper is not suited to welding, but it can be welded with gas shielded arc welding or resistance welding. It can be readily soft soldered, silver soldered, or brazed.[2]

Tellurium copper can be used as the electrode in electrical discharge machining (EDM) - the alloy is used to replace copper when grinding wheel loading occurs during fine finishing of the electrode - the alloy retains the properties of copper in the EDM process.[3]

Phase diagram

Copper forms tellurides. These include Cu4Te, Cu2Te (m.p. 1125 °C), and CuTe. A eutectic forms at 71% (mol) Te, (m.p. 340 °C). Between 4.3 and 30% (mol) Te there is stratification between Cu and Cu2Te.[4]

References

  1. [1]
    "Usage Patterns for Tellurium", A Report of the NMAB (National Materials Advisory Board) (Report), no. NMAB-257, National Research Council, p. 10, Aug 1969
  2. [2]
    Warne, D.F., ed. (2000), Newnes Electrical Engineer's Handbook, 3.4.11 Copper and its alloys, p.52, ISBN 0750648791
  3. [3]
    Rao, P.N., ed. (2009), "11. Unconventional Machining Processes", Manufacturing Technology, vol. 2 Metal and Machine Tools (2nd ed.), Tata McGraw-Hill (New Delhi), § 11.2.5 Electrodes, p.305, ISBN 0070087695
  4. [4]
    Borisova, Z. (1981), Glassy Semiconductors, Springer, 7. The Arsenic-Tellurium-Copper System, p.423, doi:10.1007/978-1-4757-0851-6

Further reading

  • Pashinkin, A.S.; Federov, V.A. (June 2003). "Phase equilibria in the Cu–Te system". Inorganic Materials. 39 (6): 539–554. doi:10.1023/A:1024003932461.
  • Blachnik, R.; Lasocka, M.; Walbrecht, U. (15 July 1983). "The system copper-tellurium". Journal of Solid State Chemistry. 48 (3): 431–438. doi:10.1016/0022-4596(83)90102-0.
Share this article:

This article uses material from the Wikipedia article Tellurium_Copper, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.