JANET
In the early 1980s a standardisation and interconnection effort started, hosted on an expansion of the SERCnet X.25 research network.[13][14][15] The JANET effort was based on the Coloured Book protocols developed by the British academic community, which provided the first complete X.25 standard,[16][17] and gave the UK "several years lead over other countries".[18] The naming scheme, JANET NRS, established "UK" as the top-level domain. When the Internet's Domain Name System adopted the ISO standard for country code top-level domains later in 1984, the UK had a pre-existing national standard which was retained as the .uk Internet country-code top level domain for the United Kingdom.[19][20][21]
JANET went live on 1 April 1984,[2] two years before the NSFNET initiated operations in the United States.[13] It hosted about 50 sites with line speeds of 9.6 kbit/s. In the mid-80s the backbone was upgraded to 2 Mbit/s, with 64 kbit/s access links. JANET connected to NSFNET in 1989.[22][23]
JIPS
Planning began in January 1991 for the JANET Internet Protocol Service (JIPS).[18] It was set up as a pilot project in March 1991 to host Internet Protocol (IP) traffic on the existing network.[24] Within eight months the IP traffic had exceeded the levels of X.25 traffic, and the IP support became official in November.[8]
JANET became, primarily, a high-speed IP network. A further upgrade in the early 1990s took the backbone to 8 Mbit/s and the access links to 2 Mbit/s, making Janet the fastest X.25 network in the world.[citation needed]
There had been some talk of moving Janet to OSI protocols in the 1990s, but changes in the networking world meant this never happened. The X.25 service was closed in August 1997.[25]
SuperJanet
In order to address speed concerns, several hardware upgrades have been incorporated into the Janet system. In 1989 SuperJanet was proposed, to re-host JANET on a fibre optic network. Work started in late 1992, and by late 1993 the first 14 sites had migrated to the new 34 Mbit/s ATM system. SuperJanet also moved solely to IP.[26]
In 1995 SuperJanet2 started, adding 155 Mbit/s ATM backbones and a 10 Mbit/s SMDS network encompassing some of the original JANET nodes. JANET's mandate now included running metropolitan area networks centred on these sites.
SuperJanet3 created new 155 Mbit/s ATM nodes to fully connect all of the major sites at London, Bristol, Manchester and Leeds, with 34 Mbit/s links to smaller sites around the country.
In March 2001 SuperJanet4 was launched. The key challenges for SuperJanet4 were the need to increase network capacity and to strengthen the design and management of the JANET network to allow it to meet a similar increase in the size of its userbase.
SuperJanet4 saw the implementation of a 2.5 Gbit/s core backbone from which connections to regional network points of presence were made at speeds ranging between 155 Mbit/s to 2.5 Gbit/s depending upon the size of the regional network. In 2002 the core SuperJanet4 backbone was upgraded to 10 Gbit/s.
SuperJanet4 also saw an increase in the userbase of the JANET network, with the inclusion of the Further Education Community and the use of the SuperJanet4 backbone to interconnect schools' networks. The core point of presence (Backbone) sites in SuperJanet4 were Edinburgh, Glasgow, Warrington, Reading, Bristol, Portsmouth, London and Leeds.
In October 2006 the SuperJanet5 project was launched after £29 million of investment. It provides a 10 Gbit/s backbone, with an upgrade path to 40 Gbit/s over the next few years. The new backbone as a result of the SuperJanet5 project is a hybrid network offering, providing both a high speed IP transit service and private bandwidth channel services provisioned over a dedicated fibre network. It is designed not only to fully accommodate the requirements of the traditional JANET user base - all research institutes, universities and further education - but also to meet the needs of a new userbase in the UK's primary and secondary schools.
In April 2011 Verizon helped Janet upgrade 4 central locations to run at 100 Gbit/s bringing it to a national research and education network performance parity with Internet2 (which upgraded its backbone to 100 Gbit/s in October 2007). As of October 2011 they have over 18 million end-users.[27]
Janet6 started to go live in July 2013,[28] and was officially launched at an event at the London Film Museum on 26 November 2013.[29] At launch, Janet6 had an initial capacity of 2 Tbit/s.[30]