USB4

USB4

USB4

Technical standard in computing


Universal Serial Bus 4, marketed as USB4 and sometimes referred to as USB 4.0, is a new technical specification of the Universal Serial Bus data connection standard, released on 29 August 2019 by the USB Implementers Forum.

Quick Facts Type, Production history ...
USB4 Gen3×2 cable (40 Gbps) with 100 W Power Delivery

USB4 allows sharing a single, high-speed data link with multiple devices dynamically. USB4 devices must support 20 Gbit/s data transfer rates and, optionally, the rates of 40 Gbit/s (USB4 version 1.0), 80 Gbit/s (USB4 version 2.0), and 120Gbit/s.[1][2] In contrast to prior USB protocol standards, USB4 mandates the exclusive use of the USB-C connector and USB Power Delivery specification.[citation needed]

USB4 architecture is based on USB 3.2 specification.[3] It also incorporates elements of the Thunderbolt 3 protocol; however, interoperability with Thunderbolt 3 products is mandatory only on selected USB4 device types.[4]

History

USB4 was announced in March 2019.[5][6] The USB4 specification version 1.0, released 29 August 2019, uses "Universal Serial Bus 4" and specifically "USB4", that is, the short name branding is deliberate without a separating space, which is different than prior versions. Several news reports before the release of that version use the terminology "USB 4.0" and "USB 4".[7][8] Even after publication of rev. 1.0, some sources write "USB 4", claiming "to reflect the way readers search".[9]

On 1 September 2022, the USB Promoter Group announced the pending release of the USB4 Version 2.0 specification, and the specification was subsequently released on 18 October 2022.[10][11]

At time of publication of version 1.0, promoter companies having employees that participated in the USB4 Specification technical work group were: Apple Inc., Hewlett-Packard, Intel, Microsoft, Renesas Electronics, STMicroelectronics, and Texas Instruments.

Goals stated in the USB4 specification are increasing bandwidth, helping to converge the USB-C connector ecosystem, and "minimize end-user confusion". Some of the key areas to achieve this are using a single USB-C connector type, while retaining compatibility with existing USB and Thunderbolt products.[12]

On 29 April 2020, DisplayPort Alt Mode version 2.0 was released, supporting DisplayPort 2.0 over USB4.[13]

Data transfer modes

USB4 by itself does not provide any generic data transfer mechanism or device classes like USB 3.x, but serves mostly as a way to tunnel other protocols like USB 3.2, DisplayPort, and optionally PCIe. While it does provide a native Host-to-Host protocol, as the name implies it is only available between two connected hosts; it is used to implement Host IP Networking. With the USB4 1.0 specification, when the host and device do not support optional PCIe tunneling, the non-display bandwidth is limited to mandatory USB 3.2 10 Gbit/s, with optional[disputed ] support for USB 3.2 20 Gbit/s. The USB4 2.0 specification named this USB3 Gen X tunneling and introduced optional support for a new USB3 Gen T tunneling that extends the USB3 protocol to be able to use the maximum available bandwidth.

USB4 V2.0 specifies tunneling of:

USB4 also includes support of a DisplayPort alternate mode. That means, DisplayPort signalling (including audio/video signals) can be sent either via USB4 tunneling or using a USB-C alternate mode. DisplayPort 2.1 specification supports a video resolution up to 8K at 60 Hz with HDR10 color depth, and data rate up to 80 Gbit/s which is the same amount available to USB data, but just unidirectional.[14]

Legacy USB (1–2) is always supported using the dedicated wires in the USB-C connector.

Some transfer modes are supported by all USB4 devices, support for others is optional. The requirements for supported modes depend on the type of device.

More information Mode, Host ...
More information Mode Name, Old Name(s) ...
  1. USB4 Gen 2×1 and Gen 2×2 is different from USB 3.2 Gen 2×1 and Gen 2×2 respectifely. They only signify the same speed, but are coded differently on the electrical layer.
  2. USB4 can use optional Reed–Solomon forward error correction (RS FEC). In this mode, 12 × 16 B (128 bit) symbols are assembled together with 2 B (12 bit + 4 bit reserved) synchronisation bits indicating the respective symbol types and 4 B of RS FEC to allow to correct up to 1 B of errors anywhere in the total 198 B block.
  3. Gen 4 always has dual lanes.

Although USB4 is required to support dual-lane modes, it uses single-lane operations during initialization of a dual-lane link; single-lane link can also be used as a fallback mode in case of a lane bonding error.

In Thunderbolt compatibility mode, the lanes are driven slightly faster at 10.3125 Gbit/s (for Gen 2) and 20.625 Gbit/s (for Gen 3), as required by Thunderbolt specifications (these are called legacy speeds and rounded speeds[20]). After removal of 64b/66b encoding, those also become round, 20.625/66*64 = 20.000 Gbit/s.

Cable Length Limitations

Cables are sold at 16.5ft for USB 3.2, and 6.6ft for USB4 but there are no reliable sources to support these speeds functioning at specification.

More information USB Specification, Max. Data Transfer Rate ...

[21]

Power delivery

USB4 requires USB Power Delivery (USB PD). A USB4 connection needs to negotiate a USB PD contract before being established. A USB4 source must at least provide 7.5 W (5 V, 1.5 A) per port. A USB4 sink must require less than 250 mA (default), 1.5 A, or 3 A @ 5 V of power (depending on USB-C resistor configuration) before USB PD negotiation. With USB PD, up to 240 W of power is possible with 'Extended power range' (5 A at 48 V). For 'Standard Power range' up to 100 W is possible (5 A at 20 V).

Thunderbolt 3 compatibility

The USB4 specification states that a design goal is to "Retain compatibility with existing ecosystem of USB and Thunderbolt products." Compatibility with Thunderbolt 3 is required for USB4 hubs; it is optional for USB4 hosts and USB4 peripheral devices.[22] Compatible products need to implement 40 Gbit/s mode, at least 15 W of supplied power, and the different clock; implementers need to sign the license agreement and register a Vendor ID with Intel.[23]

Pinout

Type-C receptacle pinout (end-on view)

USB4 has 24 pins in a symmetrical USB type C shell. USB4 has 12 A pins on the top and 12 B pins on the bottom.[24]

USB4 has two lanes of differential SuperSpeed pairs. Lane one uses TX1+, TX1−, RX1+, RX1− and lane two uses TX2+, TX2−, RX2+, RX2−. USB4 transfers data at 20 Gbit/s per lane. USB4 also keeps the differential D+ and D− for USB 2.0 transfer.[25]

The CC configuration channels have the roles of creating a relationship between attached ports, detecting plug orientation due to the reversible USB type C shell, discovering the VBUS power supply pins, determining the lane ordering of the SuperSpeed lanes, and finally the USB protocol makes the CC configuration channel responsible for entering USB4 operation.[26]

More information Pin, Name ...
More information Pin, Name ...
  1. There is only a single non-SuperSpeed differential pair in the cable. This pin is not connected in the plug/cable.

Software support

USB4 is supported by:

Hardware support

During CES 2020, USB-IF and Intel stated their intention to allow USB4 products that support all the optional functionality as Thunderbolt 4 products. The first products compatible with USB4 were Intel's Tiger Lake processors, with more devices appearing around the end of 2020.[30][31]

Brad Saunders, CEO of the USB Promoter Group, anticipates that most PCs with USB4 will support Thunderbolt 3, but for phones the manufacturers are less likely to implement Thunderbolt 3 support.[9]

On 3 March 2020, Cypress Semiconductor announced new Type-C power (PD) controllers supporting USB4, CCG6DF as dual port and CCG6SF as single-port.[32]

In November 2020, Apple unveiled MacBook Air (M1, 2020), MacBook Pro (13-inch, M1, 2020), and Mac mini (M1, 2020) featuring two USB4 ports.

AMD also stated that Zen 3+ (Rembrandt) processors will support USB4[33] and released products do have this feature after a chipset driver update.[34] However, AMD has only announced support for USB 3.2 Gen 2×2 in Zen 4 processors that were released in September 2022.[35][36] Intel supports Thunderbolt 3 and USB-C with the mobile 9th generation processors in 2019.


References

  1. "USB4® Specification v2.0". USB-IF. October 2022.
  2. USB4® Specification v2.0

    2 Architectural Overview
    Enhanced SuperSpeed USB, as defined in the USB 3.2 Specification, remains the fundamental architecture for USB data transfer on a USB4 Fabric.
  3. Hill, Brandon (2019-03-04). "USB4 Leverages Thunderbolt 3 Protocol Doubling Speeds To 40Gbps". HotHardware. Archived from the original on 2021-10-23. Retrieved 2020-04-28.
  4. "USB4 announced with 40Gbps bandwidth, it's based on Thunderbolt 3". GSMArena.com. Archived from the original on 2022-01-15. Retrieved 2020-04-29.
  5. "With USB 4, Thunderbolt and USB will converge". 2019-03-04. Archived from the original on 2022-09-10. Retrieved 2020-05-01.
  6. Hagedoorn, Hilbert. "USB 4.0 Will Arrive in Late 2020". Guru3D. Archived from the original on 2021-10-26. Retrieved 2020-04-30.
  7. September 2019, Avram Piltch 03 (2021-04-20). "USB 4: Everything We Know So Far". Tom's Hardware. Archived from the original on 2021-06-30. Retrieved 2020-04-30.{{cite web}}: CS1 maint: numeric names: authors list (link)
  8. "USB Promoter Group Announces USB4 Version 2.0". www.businesswire.com. 2022-09-01. Archived from the original on 2022-09-02. Retrieved 2022-09-02.
  9. "USB-IF Announces Publication of New USB4® Specification to Enable USB 80Gbps Performance" (PDF). USB-IF. USB Implementers Forum. 2022-10-18. Retrieved 2023-01-19.
  10. USB4 Spec. p.1
  11. Association (VESA), Video Electronics Standards. "VESA Releases Updated DisplayPort Alt Mode Spec to Bring DisplayPort 2.0 Performance to USB4 and New USB Type-C Devices". www.prnewswire.com. Archived from the original on 2021-11-24. Retrieved 2020-04-30.
  12. "USB Promoter Group USB4 Specification v2.0". USB Implementers Forum. 2019-08-29. Archived from the original on 2023-03-26. Retrieved 2023-05-11.
  13. "USB 3.2 Specification Language Usage Guidelines from USB-IF" (PDF). Archived (PDF) from the original on 2021-11-03. Retrieved 2021-11-13.
  14. "USB Performance Logo Usage Guidelines" (PDF). Archived (PDF) from the original on 2023-03-23. Retrieved 2023-05-11.
  15. GraniteRiverLabs, Team (2023-01-17). "Welcome to the 80Gpbs Ultra-High Speed Era of USB4 | GraniteRiverLabs Taiwan". www.graniteriverlabs.com. Archived from the original on 2023-02-21. Retrieved 2023-02-21.
  16. "How to Test and Troubleshoot USB4" (PDF). Archived (PDF) from the original on 2022-09-10. Retrieved 2022-07-25.
  17. "How to Beat the Maximum USB Cable Length Limit". blog.tripplite.com. Retrieved 2024-03-14.
  18. USB4 Specification V1.0 August 2019 Chapter 13: "A USB4 host and USB4 peripheral device may optionally support TBT3-Compatibility. If a USB4 host or USB4 peripheral device supports TBT3-Compatibility, it shall do so as defined in this chapter".
  19. "USB4 Thunderbolt3 Compatibility Requirements Specification – USB-F". Archived from the original on 2021-11-24. Retrieved 2021-11-13.
  20. "The Relationship Between USB4 and the USB Type-C Connector". Total Phase Blog. 2020-02-18. Archived from the original on 2022-09-10. Retrieved 2022-04-05.
  21. "USB4 Specification". www.usb.org. Archived from the original on 2022-04-14. Retrieved 2022-04-05.
  22. Leung, Benson (2018-11-19). "USB Type-C™'s Configuration Channel". Medium. Archived from the original on 2022-04-05. Retrieved 2022-04-05.
  23. "Introducing the next generation of Mac". apple.com. 2020-11-10. Archived from the original on 2021-03-01. Retrieved 2020-11-13.
  24. windows-driver-content. "Introduction to the USB4 connection manager in Windows". docs.microsoft.com. Archived from the original on 2021-11-03. Retrieved 2021-11-03.
  25. "USB4 devices are clear to roll out next year". Engadget. Archived from the original on 2021-11-24. Retrieved 2020-04-28.
  26. Maislinger, Florian (2019-06-14). "First USB 4 devices to be launched at the end of 2020". Archived from the original on 2021-11-24. Retrieved 2020-04-28.
  27. Shilov, Anton. "Cypress Announces USB 3.2 & USB4-Ready Controllers: EZ-PD CCG6DF & CCG6SF". www.anandtech.com. Archived from the original on 2021-12-06. Retrieved 2020-04-28.
  28. Cutress, Ian (2022-01-04). "AMD Announces Ryzen 6000 Mobile CPUs for Laptops: Zen3+ on 6nm with RDNA2 Graphics". Anandtech. Archived from the original on 2022-06-25. Retrieved 2022-07-26.
  29. Bonshor, Gavin (2022-05-23). "AMD Ryzen 7000 Announced: 16 Cores of Zen 4, Plus PCIe 5 and DDR5 for Socket AM5, Coming This Fall". Anandtech. Archived from the original on 2022-07-26. Retrieved 2022-07-26.

Share this article:

This article uses material from the Wikipedia article USB4, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.