Establishment

Preliminary surveys had been completed in 1829,^[10] followed by an initial public meeting held in Wigan on 7 November that was reported by a Liverpool newspaper:^{[lower-alpha 1][12]}

Wigan Railway.-On Wednesday se'nnight a meeting of gentlemen favourable to the construction of a branch railroad, to connect Wigan and its neighbourhood with the Liverpool and Manchester railway, was held at the Eagle and Child Inn, in Wigan, at which Ralph Thicknesse, Esq. presided, and at which a variety of resolutions were passed. The substance of these was, that a line of road then and there suggested by Mr. Vignoles, the engineer, which includes a branch to join the Lancaster Canal, should be adopted; that notice should be given of the company's intention to apply next session for an Act of Parliament to carry the object into effect; that £60,000 should be the capital of the company, and not £40,000 as at first proposed; and that a committee be appointed at the next meeting (which was to take place yesterday) to conduct the company's affairs. In conclusion, R. Greenough, Esq. was called to the chair, and the thanks of the meeting were given to the Mr. Thicknesse for his able conduct in the chair.^{[lower-alpha 2]}

The Wigan Branch Railway obtained an Act of Parliament on 29 May 1830 to build a 6 miles 47 chains (10.6 km) line from the Liverpool and Manchester Railway (L&MR) near Parkside to Wigan.^{[lower-alpha 3]} The Act included a 2 miles 54 chains (4.3 km) branch, the Springs branch, with connections to collieries in the district. ^{[act 1][15][16][17]}

The line was promoted by 19 sponsors who were mainly Wigan-area coal merchants and colliery owners. They wanted a cheaper and faster way to get their coal to Liverpool and Manchester than using the canals.^{[lower-alpha 4][18]} Ralph Thicknesse was elected as the first chairman.^{[act 1][10]} Other original prominent shareholders were Edward Cropper, a Liverpool businessman and shareholder of the L&MR; and James Chapman also a shareholder in the L&MR, Chapman was appointed treasurer, secretary and general superintendent of the WBR in June 1830. After the first year Theodore Woolman Rathbone, also a shareholder of the L&MR, became a shareholder and director and at the following general meeting he was elected chairman.^[19]

Plans

The line as planned would have had multiple connections at the southern end where it connected to the L&MR at Parkside, the plans show that it was intended to have east and west facing curves and a spur to Parkside station arriving at right angles. The Springs branch was also intended to make both north and south facing junctions with the main line.^[20] There were no intermediate stations planned and the northern terminus was situated at Chapel Lane in Wigan.^[21]

v t e Parkside area 1832
Legend
to Liverpool Newton Junction W&NR Haydock Colliery Projected branch of W&NR Projected branch(es) of WBR WBR to Wigan Parkside first station Bolton Junction K&LJR to B&LR to Bolton to Manchester

Construction

In June 1830 Charles Vignoles was appointed engineer. He was familiar with the area having been involved with surveying the L&MR.^{[lower-alpha 5][10][11]}

The line was constructed by contractors Pritchard & Hoof who were also awarded a two-year maintenance contract. The contract was not a success and they were relieved of the maintenance element before the end of the contractual period resulting in legal action that the contractors won.^[8]

The intention had been to construct a double track railway but money was in short supply and economies were made resulting in only the main line being constructed, it was engineered with enough space for a double track but only a single track was laid, with three passing loops per mile and only the east facing curve was provided at Parkside.^[8][23]

Operations

The line opened to traffic on 3 September 1832 without ceremony, the directors travelled in a separate carriage attached to the first train in each direction before dining together at Wigan.^[24]

The Wigan Branch Railway did not hire its own staff or provide motive power and rolling stock. Instead the line was worked under contract by the L&MR who provided a locomotive and a few coaches for passengers to run thrice daily each way between Parkside and Wigan.^{[lower-alpha 6]} The L&MR agreed to provide porters to turn the coaches at Parkside and the WBR was to provide a guard for each train, the establishment at Wigan, make all the bookings and collect the fares for passengers and parcels at Wigan, the receipts were to be apportioned according to a formula that took account of the relative use of each line, fares were set at 5s for first class and 3s 6d for second class for any journey between Wigan and Liverpool or Manchester.^[9]

As the line was operated under contract by the L&MR it likely followed L&MR practices. On the L&MR intermediate stopping places were neither advertised nor provided with facilities, they were mostly situated at level crossings where a policeman or gateman was permanently on duty, passengers wishing to use the stopping place informed the staff who signalled the requirement to stop to the train crew.^[27][28] The WBR had one crossing on the level, at Golborne, 1 mile 72 chains (3.1 km) from Parkside,^[29] where the Warrington to Wigan turnpike crossed the railway at a gated level crossing known as Golborne Gates and this would have been an identified stopping place on the line and therefore may have operated as a station in the same way as on the L&MR.^[30]

There is no evidence that through carriages ran between Wigan and Liverpool or Manchester at this time, it appears that passengers had to change at Parkside where they walked between the trains.^[24][31] In October 1832 the WBR arranged for a glass coach to run from Parkside to Newton Junction to meet the morning first class trains from Liverpool and Manchester.^{[lower-alpha 7][9]}

The L&MR provided locomotives and wagons to convey freight between Wigan and Liverpool or Manchester at 5s per ton.^{[lower-alpha 8]}

The railway announced in October 1832 that it would begin moving goods along the line and began construction of a warehouse at Wigan for this purpose.^[9]

From opening some colliery owners ran their own trains on the line, Richard Evans had a connection to it to transport coal from his Edge Green Colliery.^[34]