Willesden Traction Maintenance Depot (TMD) is a railway locomotive and electric multiple unit traction maintenance depot, situated in Harlesden, north London. The depot is situated next to the West Coast Main Line, to the south-east of Willesden Junction station and on the way into London Euston station. The depot code is WN.

This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations. (October 2014)

Quick Facts Location, Coordinates ...

Willesden Traction Maintenance Depot

London Overground units and a Class 87 at Willesden TMD.
Location
Location	Willesden, London, England
Coordinates	51.5312°N 0.2397°W / 51.5312; -0.2397
OS grid	TQ220828
Characteristics
Owner	Alstom
Depot code	WN (1973-)[1]
Type	Electric
History
Original	British Rail
BR region	London Midland Region
Former depot code	1A (until 1973)[1]

Close

The original locomotive servicing facility at Willesden was on the south side of the main line, west of the station, which closed in 1965. It was replaced by the present facility.

The current depot was designed in the 1960s to service electric locomotive classes AL1 to AL6 (TOPS classes 81, 82, 83, 84, 85 and 86); subsequently, in the early 1970s, Class 87s were included. It consists of six parallel shed roads, each holding four locomotives inside the shed, and several arrivals and departure sidings externally. There is also a road that runs round to the north of the shed, which provides access to the fuel siding; for many years, this was used only for the occasional fuelling of diesel shunters and also to the DC lines of Willesden Junction Low Level station, which is used to move multiple units from the shed onto the North London Line after servicing.

The arrival and departure sidings contain two connections to the West Coast main line onto the up slow line. At the east end of the depot, there is a trailing crossover to permit access onto the down slow line when coming off depot.

These include offices, a workshop and reasonably large stores. The workshop contains high quality facilities for pantograph overhaul, tap-changer overhaul and brake equipment test and servicing.

In more recent years, especially since the loss of AC electric locomotives, the fuel siding was promoted to other train operators as a facility at Willesden and a means to generate some revenue, this meant for instance that Gospel Oak to Barking Line DMUs did not need to travel to Bletchley TMD and back each night for 'A' examinations and fuelling which could instead be carried out at Willesden.

• Class 09
• Class 378
• Class 710

• List of British Railways shed codes