Bliss-Leavitt_Mark_1_torpedo

Bliss-Leavitt Mark 1 torpedo

Bliss-Leavitt Mark 1 torpedo

United States Navy torpedo

The Bliss-Leavitt Mark 1 torpedo was a Bliss-Leavitt torpedo adopted by the United States Navy for use in an anti-surface ship role after the E. W. Bliss Company of Brooklyn, New York, which had been building Whitehead torpedoes for the US Navy, began designing and manufacturing their own torpedoes in 1904.[1]

Quick Facts Type, Place of origin ...

Characteristics

The air flask pressure of the Bliss-Leavitt Mark 1 was 2,250 pounds per square inch (15,500 kPa); the earlier Whitehead models had a lower flask pressure of 1,500 psi (10,000 kPa). The air in the Mark 1 was heated by burning alcohol in a chamber upstream from the engine; the increased air flask pressure and heated air served to increase the range of the Bliss-Leavitt Mark 1 to 4,000 yards (3,700 m) at 27 knots (50 km/h; 31 mph). However, it used a single vertical turbine wheel rotating about the torpedo's longitudinal axis and driving a single propeller. This caused an unbalanced torque that was sufficient to cause the Mark 1 to have a tendency to roll.[1]

The Bliss-Leavitt Mark 1 was launched from battleships, torpedo boats and cruisers.

See also

References

  1. [1]
    "Torpedo History: Bliss-Leavitt Torpedo Mk1". Retrieved 10 June 2013.
  2. [2]
    "United States of America Torpedoes Pre-World War II". Retrieved 24 June 2013.
Share this article:

This article uses material from the Wikipedia article Bliss-Leavitt_Mark_1_torpedo, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.