JoWo_ink_feed_&_housing.jpg
Size of this preview:
800 × 579 pixels
.
Other resolutions:
320 × 232 pixels
|
640 × 463 pixels
|
1,024 × 741 pixels
|
1,280 × 926 pixels
|
2,613 × 1,891 pixels
.
Summary
Description JoWo ink feed & housing.jpg |
English:
JoWo #6 ink feed in the foreground and its housing in the background. The finned structure at the rear half of the ink feed is intended for buffering fountain pen ink. Buffering is the capacity to catch and temporary hold an overflow of ink caused by other conditions than writing towards the nib. When a fountain pen nib receives such an overflow it will result in ink blobbing or dripping also know as burping.
The business end of a fountain pen nib unit consists of three parts - the nib housing, the ink feed and the nib itself. It is usual that the whole assembly is mounted inside a casing called the nib or grip section, via a corresponding thread on the housing. Nibs come in a variety of sizes, the most popular ones being size 5 (or type 5, or #5) and size 6 (or type 6, or #6). They are so called because they are designed fit around an ink feed which is 5 mm or 6 mm in diameter respectively. |
Date | |
Source | Own work |
Author | Francis Flinch |
Licensing
I, the copyright holder of this work, hereby publish it under the following license:
This file is licensed under the
Creative Commons
Attribution-Share Alike 4.0 International
license.
-
You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
-
Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.