Glycolonitrile, also called hydroxyacetonitrile or formaldehyde cyanohydrin, is the organic compound with the formula HOCH₂CN. It is the simplest cyanohydrin and it is derived from formaldehyde.^[3] It is a colourless liquid that dissolves in water and ether. Because glycolonitrile decomposes readily into formaldehyde and hydrogen cyanide, it is listed as an extremely hazardous substance. In January 2019, astronomers reported the detection of glycolonitrile, another possible building block of life among other such molecules, in outer space.^[4]

Quick Facts Names, Identifiers ...

Glycolonitrile

Names
Preferred IUPAC name Hydroxyacetonitrile
Other names Cyanomethanol[1] Formaldehyde cyanohydrin[1] Glycolic nitrile[1] Hydroxyacetonitrile[1] Hydroxyethylnitrile[citation needed]
Identifiers
CAS Number	107-16-4 Y
3D model (JSmol)	Interactive image
Beilstein Reference	605328
ChEBI	CHEBI:137685
ChemSpider	7569 N
ECHA InfoCard	100.003.155
EC Number	203-469-1
MeSH	glycolonitrile
PubChem CID	7857
UNII	ZCI474BE63 N
CompTox Dashboard (EPA)	DTXSID3025417
InChI InChI=1S/C2H3NO/c3-1-2-4/h4H,2H2 Y Key: LTYRAPJYLUPLCI-UHFFFAOYSA-N Y
SMILES OCC#N
Properties
Chemical formula	C2H3NO
Molar mass	57.052 g·mol−1
Appearance	Colourless, oily liquid
Odor	odorless[2]
Density	1.10 g/mL (18.89°C)[2]
Melting point	< −72 °C; −98 °F; 201 K[2]
Boiling point	99.6 °C; 211.2 °F; 372.7 K at 2.3 kPa
Solubility in water	soluble[2]
Vapor pressure	1 mmHg (62.78°C)[2]
Hazards
Occupational safety and health (OHS/OSH):
Main hazards	forms cyanide in the body[2]
NIOSH (US health exposure limits):
PEL (Permissible)	none[2]
REL (Recommended)	C 2 ppm (5 mg/m3) [15-minute][2]
IDLH (Immediate danger)	N.D.[2]
Related compounds
Related alkanenitriles	Hydrogen cyanide Thiocyanic acid Cyanogen iodide Cyanogen bromide Cyanogen chloride Cyanogen fluoride Acetonitrile Aminoacetonitrile Cyanogen Propanenitrile Aminopropionitrile Malononitrile Pivalonitrile Acetone cyanohydrin
Related compounds	DBNPA
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). N verify (what is YN ?) Infobox references

Close

Glycolonitrile is produced by reacting formaldehyde with hydrogen cyanide at near-neutral pH, but with small amounts of catalytic base.^[5] Glycolonitrile polymerizes under alkaline conditions above pH 7.0. As the product of polymerization is an amine with a basic character, the reaction is self-catalysed, gaining in speed with ongoing conversion.

Glycolonitrile can react with ammonia to give aminoacetonitrile, which can be hydrolysed to give glycine:

HOCH₂CN + NH₃ → H₂NCH₂CN + H₂O

H₂NCH₂CN + 2 H₂O → H₂NCH₂CO₂H + NH₃

The industrially important chelating agent EDTA is prepared from glycolonitrile and ethylenediamine followed by hydrolysis of the resulting tetranitrile. Nitrilotriacetic acid is prepared similarly.^[5]