The steradian (symbol: sr) or square radian[1][2] is the unit of solid angle in the International System of Units (SI). It is used in three dimensional geometry, and is analogous to the radian, which quantifies planar angles. Whereas an angle in radians, projected onto a circle, gives a length of a circular arc on the circumference, a solid angle in steradians, projected onto a sphere, gives the area of a spherical cap on the surface. The name is derived from the Greekστερεόςstereos 'solid' + radian.
Quick Facts General information, Unit system ...
steradian
A graphical representation of two different steradians. The sphere has radius r, and in this case the area A of the highlighted spherical cap is r2. The solid angle Ω equals [A/r2] sr which is 1 sr in this example. The entire sphere has a solid angle of 4πsr.
The steradian is a dimensionless unit, the quotient of the area subtended and the square of its distance from the centre. Both the numerator and denominator of this ratio have dimension length squared (i.e. L2/L2 = 1, dimensionless). It is useful, however, to distinguish between dimensionless quantities of a different kind, such as the radian (a ratio of quantities of dimension length), so the symbol "sr" is used to indicate a solid angle. For example, radiant intensity can be measured in watts per steradian (W⋅sr−1). The steradian was formerly an SI supplementary unit, but this category was abolished in 1995 and the steradian is now considered an SI derived unit.
Definition
A steradian can be defined as the solid angle subtended at the centre of a unit sphere by a unit area on its surface. For a general sphere of radiusr, any portion of its surface with area A = r2 subtends one steradian at its centre.[3]
The solid angle is related to the area it cuts out of a sphere:
Because the surface area A of a sphere is 4πr2, the definition implies that a sphere subtends 4π steradians (≈12.56637sr) at its centre, or that a steradian subtends 1/4π ≈ 0.07958 of a sphere. By the same argument, the maximum solid angle that can be subtended at any point is 4π sr.
Other properties
If A = r2, it corresponds to the area of a spherical cap (A = 2πrh, where h is the "height" of the cap) and the relationship holds. Therefore, in this case, one steradian corresponds to the plane (i.e. radian) angle of the cross-section of a simple cone subtending the plane angle 2θ, with θ given by:
This angle corresponds to the plane aperture angle of 2θ ≈1.144rad or 65.54°.
"Steradian", McGraw-Hill Dictionary of Scientific and Technical Terms, fifth edition, Sybil P. Parker, editor in chief. McGraw-Hill, 1997. ISBN0-07-052433-5.
R. Bracewell, Govind Swarup, "The Stanford microwave spectroheliograph antenna, a microsteradian pencil beam interferometer" IRE Transactions on Antennas and Propagation9:1:22-30 (1961)
External links
Look up steradian in Wiktionary, the free dictionary.
This article uses material from the Wikipedia article Steradian, and is written by contributors.
Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.