2019_LTi_Printing_250

2019 LTi Printing 250

2019 LTi Printing 250

Motor car race


The 2019 LTi Printing 250 is a NASCAR Xfinity Series race held on June 8, 2019, at Michigan International Speedway in Brooklyn, Michigan. Contested over 125 laps on the 2.5-mile (4.0 km) D-shaped oval, it was the 13th race of the 2019 NASCAR Xfinity Series season.

Quick Facts Date, Location ...

Background

Track

Michigan International Speedway is a moderate-banked D-shaped speedway located in Brooklyn, Michigan. The track is used primarily for NASCAR events. It is sometimes known as a "sister track" to Texas World Speedway, and was used as the basis of Auto Club Speedway. The track is owned by International Speedway Corporation. Michigan International Speedway is recognized as one of motorsports' premier facilities because of its wide racing surface and high banking (by open-wheel standards; the 18-degree banking is modest by stock car standards).

Entry list

More information No., Driver ...

Practice

First practice

Christopher Bell was the fastest in the first practice session with a time of 38.143 seconds and a speed of 188.763 mph (303.785 km/h).[4]

More information Pos, No. ...

Final practice

Christopher Bell was the fastest in the final practice session with a time of 38.091 seconds and a speed of 189.021 mph (304.200 km/h).[4]

More information Pos, No. ...

Qualifying

Paul Menard scored the pole for the race with a time of 37.237 seconds and a speed of 193.356 mph (311.176 km/h).[5]

Qualifying results

More information Pos, No ...

Race

Summary

Stage Results

Stage One Laps: 30

More information Pos, No ...

Stage Two Laps: 30

More information Pos, No ...

Final Stage Results

Stage Three Laps: 65

More information Pos, Grid ...

References

  1. "2019 NASCAR Xfinity Series Schedule". Official Site Of NASCAR. Archived from the original on March 27, 2019. Retrieved May 5, 2019.
  2. "Michigan International Speedway". June 8, 2017. Retrieved June 3, 2019.
  3. Rutherford, Kevin (June 3, 2019). "Entry List: LTI Printing 250". Retrieved June 4, 2019.
  4. Long, Dustin (June 7, 2019). "Xfinity practice report from Michigan". Archived from the original on June 9, 2019. Retrieved June 15, 2019.
  5. Kristl, Mark (June 8, 2019). "Paul Menard Wins LTi Printing 250 Pole At Michigan". Retrieved June 8, 2019.
Previous race:
2019 Pocono Green 250
NASCAR Xfinity Series
2019 season
Next race:
2019 CircuitCity.com 250

Share this article:

This article uses material from the Wikipedia article 2019_LTi_Printing_250, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.