Design and construction

On April 29, 1939, Poulter and The Research Foundation of the Armour Institute of Technology showed the plans to officials in Washington, D.C. The foundation would finance the Antarctic Snow cruiser with an estimate of $150,000^[3] and oversee the construction, and lend the vehicle to the United States Antarctic Service. Work began on August 8, 1939, and lasted for 11 weeks. On October 24, 1939, the vehicle was fired up for the first time at the Pullman Company just south of Chicago and began the 1,640 km (1,020 mi) journey to the Boston Army Wharf. During the trip, a damaged steering system caused the vehicle to drive off a small bridge on the Lincoln Highway and into a stream near the town of Gomer in Ohio, where it remained for three days. When the cruiser entered Boston, it caused one of the biggest traffic jams at the time.^[4] It soon after departed for Antarctica on November 15, 1939, aboard the USCGC North Star.

Arrival in the Antarctic

The Snow Cruiser arrived at Little America in the Bay of Whales, Antarctica with United States Antarctic Service Expedition in early January 1940 and experienced many problems. It was necessary to construct a ramp from timber to unload the vehicle. As the vehicle was unloaded from the ship, one of the wheels broke through the ramp.^[5] The crew cheered when Poulter powered the vehicle free from the ramp but the cheers fell silent when the vehicle failed to move through the snow and ice. The large, smooth, treadless tires were originally designed for a large swamp vehicle; they spun freely and provided very little forward movement, sinking as much as 3 feet (0.91 m) into the snow. The crew attached the two spare tires to the front wheels of the vehicle and installed chains on the rear wheels, but were unable to overcome the lack of traction. The crew later found that the tires produced more traction when driven backwards. The longest trek was 92 miles (148 km) – driven completely in reverse. On January 24, 1940, Poulter returned to the United States, leaving Dr. Franklin Alton Wade in charge of a partial crew, which included Theodore Argyres Petras, the pilot of the Snow Cruiser's plane, US Navy sergeant Felix L. Ferranto, the radio operator, and C. W. Griffith, the diesel mechanic of the vehicle. The crew conducted seismologic experiments, cosmic-ray measurements, and ice core sampling while living in the snow- and timber-covered Snow Cruiser. Funding for the project was canceled as the focus in the United States became World War II.

Rediscovery and final fate

During Operation Highjump in late 1946, an expedition team found the vehicle and discovered it needed only air in the tires and some servicing to make it operational.

In 1958, an international expedition uncovered the snow cruiser at Little America III using a bulldozer.^[6] It was covered by 23 feet (7.0 m) of snow and a long bamboo pole marked its position.^[6] They were able to excavate to the bottom of the wheels and accurately measure the amount of snowfall since it was abandoned. Inside, the vehicle was exactly as the crew had left it, with papers, magazines, and cigarettes scattered all around.

Later expeditions reported no trace of the vehicle. Although there was some unsubstantiated speculation that the (traction-less) Snow Cruiser was taken by the Soviet Union during the Cold War, the vehicle most likely is either at the bottom of the Southern Ocean or buried deep under snow and ice.^[1] Antarctic ice is in constant motion and the ice shelf is constantly moving out to sea. In 1963, a large chunk of the Ross Ice Shelf broke off and drifted away; the break occurred right through Little America.^[7] It is not known on which side of the ice shelf the Snow Cruiser was located.