IEEE_802.11_(legacy_mode)

IEEE 802.11 (legacy mode)

IEEE 802.11 (legacy mode)

Wireless networking standard


IEEE 802.11 (legacy mode)  or more correctly IEEE 802.11-1997 or IEEE 802.11-1999  refer to the original version of the IEEE 802.11 wireless networking standard released in 1997 and clarified in 1999. Most of the protocols described by this early version are rarely used today.

More information Generation, IEEE standard ...

Description

It specified two raw data rates of 1 and 2 megabits per second (Mbit/s) to be transmitted via infrared (IR) signals or by either frequency hopping or direct-sequence spread spectrum (DSSS) in the Industrial Scientific Medical frequency band at 2.4 GHz. IR remained a part of the standard until IEEE 802.11-2016, but was never implemented.[citation needed]

The original standard also defines carrier sense 0 access with collision avoidance (CSMA/CA) as the medium access method. A significant percentage of the available raw channel capacity is sacrificed (via the CSMA/CA mechanisms) in order to improve the reliability of data transmissions under diverse and adverse environmental conditions.

IEEE 802.11-1999 also introduced the binary time unit TU defined as 1024 µs.[8]

At least seven different, somewhat-interoperable, commercial products appeared using the original specification, from companies like Alvarion (PRO.11 and BreezeAccess-II), BreezeCom, Digital / Cabletron (RoamAbout), Lucent, Netwave Technologies (AirSurfer Plus and AirSurfer Pro), Symbol Technologies (Spectrum24), and Proxim Wireless (OpenAir and Rangela2). A weakness of this original specification was that it offered so many choices that interoperability was sometimes challenging to realize. It is really more of a "beta specification" than a rigid specification, initially allowing individual product vendors the flexibility to differentiate their products but with little to no inter-vendor interoperability.

The DSSS version of legacy 802.11 was rapidly supplemented (and popularized) by the 802.11b amendment in 1999, which increased the bit rate to 11 Mbit/s. Widespread adoption of 802.11 networks only occurred after the release of 802.11b which resulted in multiple interoperable products becoming available from multiple vendors. Consequently, comparatively few networks were implemented on the 802.11-1997 standard.[citation needed]

Comparison

More information Frequencyrange, or type, PHY ...

Notes

  1. Wi-Fi 6E is the industry name that identifies Wi-Fi devices that operate in 6 GHz. Wi-Fi 6E offers the features and capabilities of Wi-Fi 6 extended into the 6 GHz band.
  2. 802.11ac only specifies operation in the 5 GHz band. Operation in the 2.4 GHz band is specified by 802.11n.

References

  1. "What is Wi-Fi 8?". everythingrf.com. March 25, 2023. Retrieved January 21, 2024.
  2. Giordano, Lorenzo; Geraci, Giovanni; Carrascosa, Marc; Bellalta, Boris (November 21, 2023). "What Will Wi-Fi 8 Be? A Primer on IEEE 802.11bn Ultra High Reliability". arXiv:2303.10442.
  3. Kastrenakes, Jacob (2018-10-03). "Wi-Fi Now Has Version Numbers, and Wi-Fi 6 Comes Out Next Year". The Verge. Retrieved 2019-05-02.
  4. Phillips, Gavin (18 January 2021). "The Most Common Wi-Fi Standards and Types, Explained". MUO - Make Use Of. Archived from the original on 11 November 2021. Retrieved 9 November 2021.
  5. "Wi-Fi Generation Numbering". ElectronicsNotes. Archived from the original on 11 November 2021. Retrieved 10 November 2021.
  6. Maufer, Thomas (2004). A Field Guide to Wireless LANs: For Administrators and Power Users. Prentice Hall Professional. p. 144. ISBN 9780131014060. 0131014064. Retrieved 2015-10-27. {{cite book}}: |work= ignored (help)
  7. "Official IEEE 802.11 working group project timelines". January 26, 2017. Retrieved 2017-02-12.
  8. Banerji, Sourangsu; Chowdhury, Rahul Singha. "On IEEE 802.11: Wireless LAN Technology". arXiv:1307.2661.
  9. IEEE Standard for Information Technology- Telecommunications and Information Exchange Between Systems- Local and Metropolitan Area Networks- Specific Requirements Part Ii: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications. (n.d.). doi:10.1109/ieeestd.2003.94282
  10. Belanger, Phil; Biba, Ken (2007-05-31). "802.11n Delivers Better Range". Wi-Fi Planet. Archived from the original on 2008-11-24.
  11. "IEEE 802.11ac: What Does it Mean for Test?" (PDF). LitePoint. October 2013. Archived from the original (PDF) on 2014-08-16.
  12. "802.11ad - WLAN at 60 GHz: A Technology Introduction" (PDF). Rohde & Schwarz GmbH. November 21, 2013. p. 14.
  13. "P802.11 Wireless LANs". IEEE. pp. 2, 3. Archived from the original on 2017-12-06. Retrieved Dec 6, 2017.
  14. "TGaf PHY proposal". IEEE P802.11. 2012-07-10. Retrieved 2013-12-29.
  15. "IEEE 802.11ah: A Long Range 802.11 WLAN at Sub 1 GHz" (PDF). Journal of ICT Standardization. 1 (1): 83–108. July 2013. doi:10.13052/jicts2245-800X.115.

Further reading

  • IEEE 802.11 Working Group (1997-11-18). IEEE Standard for Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications. doi:10.1109/IEEESTD.1997.85951. ISBN 1-55937-935-9.{{cite book}}: CS1 maint: numeric names: authors list (link)
  • IEEE 802.11 Working Group (1999-07-15). IEEE Standard for Information Technology- Telecommunications and Information Exchange Between Systems- Local and Metropolitan Area Networks- Specific Requirements- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications. doi:10.1109/IEEESTD.2003.95617. ISBN 0-7381-1857-5.{{cite book}}: CS1 maint: numeric names: authors list (link)

Share this article:

This article uses material from the Wikipedia article IEEE_802.11_(legacy_mode), and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.