Open_fiber_control

Open fiber control

Open fiber control

Communications protocol

In telecommunication, Open fiber control is a protocol to ensure that both ends of a fiber-optic cable are connected before laser signals are transmitted in order to protect people from eye damage. When a device is turned on, it sends out low powered light. If it does not receive light back, it assumes that the fiber is not connected. When it receives light, it assumes that both ends of the fiber are connected and it switches the laser to full power. If one of the devices stops receiving light, it will revert to the low power mode.[1]

References

  1. [1]
    Introduction to Storage Area Networks. Fourth Edition (July 2006). IBM Redbook.


Stub icon

This article related to telecommunications is a stub. You can help Wikipedia by expanding it.
Share this article:

This article uses material from the Wikipedia article Open_fiber_control, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.