Protein_dispersibility_index

Protein dispersibility index

Protein dispersibility index

Measure of protein solubility


The Protein Dispersibility Index (PDI) is a means of comparing the solubility of a protein in water, and is widely used in the soybean product industry.

A sample of the soybeans are ground, mixed with a specific quantity of water, and the two are then blended together at a specific rpm for a specific time. The resulting mixture and original bean flour then have their protein content measured using a combustion test, and the PDI is calculated as the percentage of the protein in the mix divided by the percentage in the flour - a PDI of 100 therefore indicates total solubility.[1][2]

It has been shown that the PDI can be affected, not only by the type of soybean used, but also by manufacturing processes - heat has been shown to lower the PDI.[3]

The PDI required of a soyflour is dependent on the purpose to which the soybeans are to be put. Manufacturers of soymilk and tofu products want a high PDI to ensure the maximum protein content in their products. However, manufacturers of soy-based fish feed require a low PDI to avoid loss of valuable protein into the surrounding water.[4]


References

  1. "Illinois Crop Improvement Association Soybean Tests". Archived from the original on 2007-08-13. Retrieved 2007-06-26.
  2. AB Batal; MW Douglas; AE Engram & CM Parsons. "Protein dispersibility index as an indicator of adequately processed soybean meal". Retrieved 2007-06-26.
  • Dudley-Cash, W.A. 1999. Methods for determining quality of soybean meal protein important. Feedstuffs. 71(1):10-11.

Share this article:

This article uses material from the Wikipedia article Protein_dispersibility_index, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.