Reinhardt-Craig_House,_Kiln_and_Pottery_Shop

Reinhardt-Craig House, Kiln and Pottery Shop

Reinhardt-Craig House, Kiln and Pottery Shop

Historic buildings in North Carolina, United States


Reinhardt-Craig House, Kiln and Pottery Shop is a historic home, kiln, and pottery shop located near Vale, Lincoln County, North Carolina. The house, kiln and pottery shop, were built by Harvey Reinhardt between 1933 and 1936. The house is a one-story, rectangular frame building, two bays wide by three bays deep. It has a front gable roof and a shed-roofed, full-width, front porch. The kiln is a traditional, wood-fired, alkaline glaze groundhog cross-draft kiln that includes a firebox, arch, and chimney, all made of brick. It measures 24 feet, 11 inches long by 11 feet, 6 inches wide. The one-story shop is a frame structure with a side-gabled tin roof and wood clapboard siding. Also on the property is a contributing pugmill built in 1949. The pottery was a producer of traditional Catawba Valley Pottery and associated with Burlon Craig (ca. 1914–2002).[2]

Quick Facts Location, Coordinates ...

It was listed on the National Register of Historic Places in 2008.[1]


References

  1. "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010.
  2. Jason L. Harpe and Brad J. Guth (n.d.). "Reinhardt-Craig House, Kiln and Pottery Shop" (pdf). National Register of Historic Places - Nomination and Inventory. North Carolina State Historic Preservation Office. Retrieved 2015-02-01.



Share this article:

This article uses material from the Wikipedia article Reinhardt-Craig_House,_Kiln_and_Pottery_Shop, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.