Short-range_device

Short-range device

Short-range device

Class of radio transmitter


A short-range device (SRD), described by ECC Recommendation 70-03, is a radio-frequency transmitter device used in telecommunication that has little capability of causing harmful interference to other radio equipment.

Short-range devices are low-power transmitters, typically limited to 25–100 mW effective radiated power (ERP) or less, depending on the frequency band, which limits their useful range to a few hundred meters, which do not require licenses to use.

Short-range wireless technologies include Bluetooth, Wi-Fi, NearLink, near-field communication (NFC), LPWAN, ultra-wideband (UWB) and IEEE 802.15.4. They are implemented by chips fabricated as RF CMOS integrated circuit (RF circuit).[1][2] As of 2009, short-range wireless chips ship approximately 1.7 billion units annually, with Bluetooth accounting for over 55% of shipments and Wi-Fi around 35% of shipments.[1]

Applications for short-range wireless devices include power meters and other remote instrumentation, RFID applications, radio-controlled models, fire, security and social alarms, vehicle radars, wireless microphones and earphones, traffic signs and signals (including control signals), remote garage door openers and car keys, barcode readers, motion detectors, and many others.

The European Commission mandates through CEPT and ETSI the allocation of several device bands for these purposes, restricts the parameters of their use, and provides guidelines for avoiding radio interference.[3][4][5]

Frequency bands

According to ECC Rec. 70-03, there are several annexes which encapsulate specific usage patterns, maximum emission power and duty cycle requirements.

More information Frequency, Band ...

SRD860

In Europe, 863 to 870  MHz band has been allocated for license-free operation using FHSS, DSSS, or analog modulation with either a transmission duty cycle of 0.1%, 1% or 10% depending on the band, or Listen Before Talk (LBT) with Adaptive Frequency Agility (AFA).[3][4] Although this band falls under the Short Range Device umbrella, it is being used in Low-Power Wide-Area Network (LPWAN) wireless telecommunication networks, designed to allow long-range communications at a low bit rate among things (connected objects).

More information Frequency, Duty cycle ...

(* = as of 1 January 2018)

As of December 2011, unrestricted voice communications are allowed in the 869.7-870.0 MHz band with channel spacing of 25 kHz or less and maximum power output of 5 mW ERP.[6][7][8]

SRD860 handheld transceivers were briefly available in mid 2000s, however they did not offer dual-band compatibility with PMR446 and LPD433 bands. As of 2012, they have been put off-market.

From January 2018, the four RFID frequencies are also available for data networks, with a power up to 500 mW and a bandwidth of 200 kHz. The center frequencies are: 865.7, 866.3, 866.9 and 867.5 MHz. Specific restrictions on usage apply, such as a low duty cycle, LBT (listen before transmit) and APC (adaptive power control).[9]

See also


References

  1. Happich, Julien (24 February 2010). "Global shipments of short range wireless ICs to exceed 2 billion units in 2010". EE Times. Retrieved 25 October 2019.
  2. Veendrick, Harry J. M. (2017). Nanometer CMOS ICs: From Basics to ASICs. Springer. p. 243. ISBN 9783319475974.
  3. CEPT/ERC REC 70-03 (22 August 2011)
  4. ETSI EN 300 220-1 v2.3.1 (2010-02). Table 5.

Share this article:

This article uses material from the Wikipedia article Short-range_device, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.