Rogue River

The Rogue River meets the Pacific Ocean at Gold Beach, and flows all the way from the Cascade Mountains. R. D. Hume was a pioneering businessman at Wedderburn and Gold Beach, then known as Ellensburg. By 1881, he had established a fish cannery and built a steam schooner, Mary D. Hume, to support the cannery operation. Hume was still conducting steamboat operations on the Rogue River in 1901, and in that year, Capt. E.D. Burns built the sternwheel steamboat Rogue River in Portland, and brought her down the coast to compete against Hume's operation. Mary D. Hume passed through several owners and was still in operation as late as 1939, when she was the oldest commercial vessel in service in the Pacific Northwest.

In November 1902, Burns succeeded in reaching deep inland on the Rogue to Agness, however, in returning to Gold Beach, on November 16, 1902 the boat struck a rock at Boiler Rapids, where, at least in 1966, her boiler was reported to be still visible. This was the only known effort to take a conventional vessel so far up the Rogue River.

In 1903 the gasoline-powered Success was built at Gold Beach for the Rogue River service. R.D. Hume continued his interest in shipping out of the Rogue River, commissioning the construction in 1908 of two small gasoline-powered schooners, Enterprise (22 tons) and Osprey (43 tons) from Ellingson in Coquille. Hume died by 1912, as his estate is reported to have sold Enterprise and Osprey to someone from Portland.^[1]

Coquille River

The Coquille River runs inland from Bandon. Before the era of railroads and later automobiles, the Coquille River was the major transportation route from Bandon to Coquille and Myrtle Point in southern Coos County.

Coos Bay

Coos Bay is a large and mostly shallow harbor on Oregon's southwest coast, to the north of the Coquille River valley. It is the major harbor on the west coast of the United States between San Francisco and the mouth of the Columbia River.

Two steamboat captains from the Columbia River began steamboat operations on Coos Bay in 1873. Inland riverboats were used to navigate the bay and the several rivers flow that flow into it. A mule-hauled portage was built between a shallow southern arm of Coos Bay and the Beaver Slough, a shallow north-extending branch of the Coquille River, in 1869; it was replaced in 1874 with a steam portage railroad. This connection established a convenient link between the steamboat operations of Coos Bay and those on the Coquille.

Numerous steamboats were built over the ensuing decades. In 1912, a number of steamboats were wrecked, by collision, fire and grounding on the sandbar at the mouth of the bay.

Umpqua River

The Umpqua River runs from Reedsport up through Douglas County. Gardiner is a town near the mouth of the Umpqua where several river steamers were built. One of the Umpqua River's several branches eventually reaches Roseburg, although the head of navigation was Scottsburg. Captain Godfrey Seymour began steamboat operations on the Umpqua River with Raftsman, later adding Washington, Swan, and Enterprise.

Swan was unique as the only steamboat to ever ascend as far as Roseburg on the Umpqua. This was in 1870, when the merchants of Gardiner were anxious to demonstrate the navigability of this river. Roseburg is 85 miles above the mouth of the river, and it took Swan 11 days to get there. This was sufficient to persuade Congress to allocate $70,000 for channel clearance of the Umpqua, even though no other steamboat ever again ran up to Roseburg.^[2]

In 1906, the propeller steamer Juno (32 tons) was built at Marshfield and placed on the Umpqua River service by the Umpqua River Steam Navigation Company.^[1]

• Scottsburg landing on Umpqua River, circa 1900, showing passengers and a number of small vessels

Siuslaw Bay and River

Siuslaw Bay is yet another large shallow bay on the Oregon coast, with its entrance about 24 miles north of the mouth of the Umpqua River. The Siuslaw River widens into the bay, which meets the ocean near the town of Florence. In 1890 or thereabouts, the Moonlight was placed in service on Siuslaw Bay and its various back channels.^[2]

• waterfront of Florence, Oregon, on Suislaw Bay, 1927

Yaquina Bay

Yaquina Bay, like Coos Bay, is another shallow coastal bay on the Oregon Coast. The principal town on Yaquina Bay is Newport. Once the Oregon Pacific Railroad reached Toledo, on the east end of Yaquina Bay, tourists started coming to the bay from the Willamette Valley. The roads were bad or nonexistent at the time, so the only way to the seaside hotels at Newport was to cross the Yaquina Bay by steamer. Propeller steamboats did most of this service, however in 1872, the sidewheeler Oneatta was launched at Pioneer, ran on the bay for a while and then was transferred to the Columbia River, and in 1882, to Humboldt Bay.^[3] Later, Rebecca C. and Cleveland also ran on Yaquina Bay.^[2]

Siletz River

The Siletz River runs into the Pacific about 30 miles north of Yaquina Bay, near the town of Taft now part of Lincoln City. The first salmon cannery was established on the Siletz River in 1896 by Daniel Kern, a Portlander. This was Kerns Bros. Packing Co., on the north side of the river. Later that same year the post office of Kernville was established in the same location, where a small town later developed. Kern brought in the small steamer Tonquin, 64' long, built at Portland, to act as a cannery tender and supply vessel. Kern later sold his cannery to Elmore Packing, of Astoria, and went into the marine construction business.

Much later, the Siletz Navigation Company operated on the Siletz, at least in the early 1920s. In 1923, Siletz (93 tons), described as a "strongly built diesel freighter" was launched at Kernville, Oregon, to serve local routes from the Siletz river entrance. This boat was probably more of an ocean-going vessel than the typical mosquito fleet craft, as she was sold to a Hawaii firm and voyaged there herself in 19 days without mishap.^[1]

Tillamook Bay

Tillamook Bay was a large very shallow bay on the northern part of the Oregon Coast. In 1911, the yacht Bay Ocean was built in Portland to provide service from Portland to Tillamook Bay for a beach resort. Bay Ocean was designed by R.A. Ballin for the T.B. Potter real estate company, which was developing the (eventually ill-fated) resort at Bay Ocean Spit on Tillamook Bay. Bay Ocean was the largest motor passenger vessel built to that date on the Pacific Coast. She was long (150') and narrow (18' beam), with a clipper bow and bowsprit. She had three gasoline engines connected to a single shaft. She could accommodate 50 passengers on the Portland-Tillamook route but had difficulty on the run and only served in the summer. She was called up by the navy to function as a patrol boat in the First World War.^[1] After the war, Bay Ocean was sold to Crowley Launch and Tug Co., of San Francisco.^[2]

• cannery tender Susan E. Elmore entering Tillamook Bay
• steamers Harrison and Susan E. Elmore at dock in Tillamook