Utah_State_Route_273

Utah State Route 273

Utah State Route 273

State highway in Utah, United States


State Route 273 (SR-273) is a state highway completely within Davis County in the northern portion of the U.S. state of Utah that connects Farmington and US-89 to Kaysville and I-15.

Quick Facts State Route 273, Route information ...

Route description

The route begins as a continuation of SR-106 at a diamond interchange on US-89 at exit 397. The road heads northwest on Main Street in Farmington, a four-lane undivided highway. A golf course appears on the northern end of the street. The road enters Kaysville and turns north briefly before turning west on 200 North. The route continues west five blocks before a diamond interchange with I-15 at exit 328 appears. Immediately after this intersection, SR-273 terminates at the junction of 600 West, a road paralleling the freeway.[2]

History

The road from Farmington northwest through Kaysville to Layton was added to the state highway system in 1910,[3] and in the 1920s it became part of SR-1 and US-91.[4] SR-1 was moved to the present alignment of I-15 in that area in 1953, and the old route became SR-106.[5] The state legislature removed the portion of SR-106 between 200 North in Kaysville and I-15 in southern Layton from the state highway system in 1969, and instead took SR-106 west on 200 North to end at I-15.[6] 200 North had been State Route 110 since 1931, initially running west from SR-1 (later SR-106) in Kaysville to West Kaysville.[7] In 1941, it was extended east to SR-49 (US-89),[8] and in 1969 it was all eliminated except for the piece that became SR-106.[9]

However, before the 1969 amendments became effective, the State Road Commission further truncated SR-106 due to the planned reconstruction of North Farmington Junction, where SR-106 crossed SR-49 (US-89). Traffic would no longer be able to cross US-89 at that point, nor could southbound traffic turn left from US-89 to SR-106.[10] To retain full access, SR-106 was sent west on Shepard Lane in Farmington to end at US-89, while the old alignment became two new routes: State Route 272 from Shepard Lane to US-89 and State Route 273 from US-89 to I-15 in Layton. An interchange replaced the old intersection at North Farmington Junction in about 2000,[11] and in 2001 SR-272 became part of SR-273. Less than four months later, former SR-272 was deleted from the state highway system, returning SR-273 to its 1969 and present extent.[12][13]

Major intersections

The entire route is in Davis County.

More information Location, mi ...

References

KML is from Wikidata
  1. "State Route 273 Highway reference". Utah Department of Transportation.
  2. Utah Department of Transportation, Highway Resolutions: "Route 1". (35.4 MB), updated September 2007, accessed May 2008
  3. Utah State Legislature (1953). "Chapter 45: Designation of State Roads". Session Laws of Utah. Route 106. From South Bountiful on route 1 northerly and east of route 1 via Bountiful, Farmington and Kaysville to route 1 at Layton.
  4. Utah Department of Transportation, Highway Resolutions: "Route 106". (6.03 MB), updated November 2007, accessed May 2008
  5. Utah State Legislature (1931). "Chapter 55: Designation of State Roads". Session Laws of Utah. (110) From Kaysville westerly to West Kaysville.
  6. Utah State Legislature (1941). "Chapter 34". Session Laws of Utah. Rout[sic] 110. From route 49 westerly via Kaysville to West Kaysville.
  7. USGS aerial photography, accessed June 2008 via ACME Mapper
  8. Utah Department of Transportation, Highway Resolutions: "Route 272". (3.29 MB), updated December 2007, accessed May 2008
  9. Utah Department of Transportation, Highway Resolutions: "Route 273". (4.73 MB), updated December 2007, accessed May 2008

Share this article:

This article uses material from the Wikipedia article Utah_State_Route_273, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.