3-pin_Charlieplexing_matrix_with_common_resistors.svg
Size of this PNG preview of this SVG file:
423 × 599 pixels
.
Other resolutions:
169 × 240 pixels
|
339 × 480 pixels
|
542 × 768 pixels
|
723 × 1,024 pixels
|
1,447 × 2,048 pixels
|
744 × 1,053 pixels
.
Summary
Description 3-pin Charlieplexing matrix with common resistors.svg |
English:
3-pin Charlieplexing configuration with common resistors to drive six identical LEDs with the minimal number of port signals. This variant illustrates the rows and columns in an expandable Charlieplexing matrix, however, it still does not allow to reliably power more than one LED at the same time, as multiple LEDs must not shorted in order to drive them through a common resistor. LEDs have manufacturing tolerances and shortening multiple LEDs without individual balancing resistors would significantly reduce their lifetime.
|
Date | |
Source | Own work |
Author | Matthiaspaul |
Licensing
I, the copyright holder of this work, hereby publish it under the following license:
This file is licensed under the
Creative Commons
Attribution-Share Alike 3.0 Unported
license.
-
You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
-
Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.