Jumper_cable_sequence.svg
Size of this PNG preview of this SVG file:
512 × 384 pixels
.
Other resolutions:
320 × 240 pixels
|
640 × 480 pixels
|
1,024 × 768 pixels
|
1,280 × 960 pixels
|
2,560 × 1,920 pixels
.
Summary
| Description |
English:
(1) to (4) is a safe sequence to connect jumper cables from the drained battery on the left to the working battery on the right by CMG Lee. If (2) were connected first and the loose end accidentally touches bare metal on its car, the working battery is shorted; shorting a drained battery is comparatively less risky. (4) is connected to bare metal away from the battery to keep any spark generated on circuit completion away from hydrogen released by the battery. Cables are disconnected in reverse order.
|
| Source | Own work |
| Author | Cmglee |
Licensing
I, the copyright holder of this work, hereby publish it under the following licenses:
This file is licensed under the
Creative Commons
Attribution-Share Alike 4.0 International
license.
-
You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
-
Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
|
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License , Version 1.2 or any later version published by the Free Software Foundation ; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License . |
You may select the license of your choice.