LMatchingNetworks.svg
Size of this PNG preview of this SVG file:
542 × 300 pixels
.
Other resolutions:
320 × 177 pixels
|
640 × 354 pixels
|
1,024 × 567 pixels
|
1,280 × 708 pixels
|
2,560 × 1,417 pixels
.
Summary
Description LMatchingNetworks.svg |
English:
L networks to match a source or load impedance Z to a transmission line Z0. X and B may be either positive (inductors) or negative (capacitors). Use network (a) when Z/Z0 is inside the 1+jx circle on the Smith chart, or (b) when it is outside.
|
Date | |
Source | Own work |
Author | Sbyrnes321 |
After "Microwave Engineering" (3rd edition) by David Pozer, Fig. 5.2, page 223. Figure incorporates part of File:Transmission line schematic.svg by Omegatron.
Licensing
I, the copyright holder of this work, hereby publish it under the following license:
This file is licensed under the
Creative Commons
Attribution-Share Alike 3.0 Unported
license.
-
You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
-
Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.