UV_effect_on_finished_wood.jpg
Summary
Description UV effect on finished wood.jpg | A 1" x 3" x 7" pine board, finished with a UV cure resin (not sanded), then exposed to various time exposures of UVA (primarily 370nm +/-10nm, less than 3% UVB at 312-315nm). Left side was exposed 43 hours, center band was shielded and received no UVA except to cure the finish, the right side was exposed for 20 hours. Exposure done with 4 SunMaster Curall UV resin curing lamp (F32T8 reflector lamp powered at 50 watts. Total UV at surface (as measured with a UVA/B meter) was approximately 15 mW/cm2 for the duration of the tests. Demonstrates the effects of ultraviolet on finished wood surfaces. |
Date | |
Source | Own work |
Author | Dennis Brown |
Licensing
I, the copyright holder of this work, hereby publish it under the following licenses:
This file is licensed under the
Creative Commons
Attribution-Share Alike 3.0 Unported
license.
-
You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
-
Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License , Version 1.2 or any later version published by the Free Software Foundation ; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License . http://www.gnu.org/copyleft/fdl.html GFDL GNU Free Documentation License true true |
You may select the license of your choice.