Image courtesy of the Carbon Capture and Storage Association.

Powering through the coming energy transition

Carbon capture and storage are key to achieving climate goals.

Mark Dwortzan | MIT Joint Program on the Science and Policy of Global Change • mit
Nov. 18, 2020 6 minSource

Aiming to avoid the worst effects of climate change, from severe droughts to extreme coastal flooding, the nearly 200 nations that signed the 2015 Paris Agreement set a long-term goal of keeping global warming well below 2 degrees Celsius. Achieving that goal will require dramatic reductions in greenhouse gas emissions, primarily through a global transition to low-carbon energy technologies. In the power sector, these include solar, wind, biomass, nuclear, and carbon capture and storage (CCS). According to more than half of the models cited in the Intergovernmental Panel on Climate Change’s (IPCC) Fifth Assessment Report , CCS will be required to realize the Paris goal, but to what extent will it need to be deployed to ensure that outcome?

A new study in Climate Change Economics , led by the MIT Joint Program on the Science and Policy of Global Change , projects the likely role of CCS in the power sector in a portfolio of low-carbon technologies. Using the Joint Program’s multi-region, multi-sector energy-economic modeling framework to quantify the economic and technological competition among low-carbon technologies as well as the impact of technology transfers between countries, the study assessed the potential of CCS and its competitors in mitigating carbon emissions in the power sector under a policy scenario aligned with the 2 C Paris goal.

The researchers found that under this scenario and the model’s baseline estimates of technology costs and performance, CCS will likely be incorporated in nearly 40 percent of global electricity production by 2100 — one-third in coal-fired power plants, and two-thirds in those run on natural gas.

“Our projections show that CCS can play a major role in the second half of this century in mitigating carbon emissions in the power sector,” says Jennifer Morris , an MIT Joint Program research scientist and the lead author of the study. “But in order for CCS to be well-positioned to provide stable and reliable power during that time frame, research and development will need to be scaled up.”

That would require a considerable expansion of today’s nearly four-dozen commercial-scale carbon capture projects around the globe, about half of which are in development.

The study also found that the extent of CCS deployment, especially coal CCS, depends on the assumed fraction of carbon captured in CCS power plants. Under a stringent climate policy with high carbon prices, the penalty on uncaptured emissions can make CCS technologies uneconomical and hinder their expansion. Adding options for higher capture rates or offsetting uncaptured emissions (e.g., by co-firing with biomass, which has already captured carbon through its cultivation and so would produce net negative emissions when combusted) can lead to greater deployment of CCS.

According to the study, CCS deployment will likely vary on a regional basis, with the United States and Europe depending primarily on gas CCS, China on coal CCS, and India embracing both options. Comparing projections of demands for CCS to an assessment of the planet’s capacity to store CO 2 , the authors found that CO 2 storage potential is larger than storage demand at both global and regional scales.

Finally, in evaluating the comparative costs of competing low-carbon technologies, the study found that nuclear generation, if public acceptance and economic issues are resolved, could substitute for CCS in providing clean dispatchable power. Renewables could also outcompete CCS, depending on how the costs of intermittency (i.e., systems that keep the lights on when the sun doesn’t shine or the wind doesn’t blow) are defined. Progress in resolving technical and economic challenges related to intermittency could reduce the need for accelerated CCS deployment.

Ultimately, the authors determined that the power sector will continue to rely on a mix of technological options, and the conditions that favor a particular mix of technologies differ by region.

“This suggests that policymakers should not pick a winner, but rather create an environment where all technologies compete on an economic basis,” says Sergey Paltsev , deputy director of the MIT Joint Program and a co-author of the study. “CCS has great potential to be a competitive option, and that potential can increase with additional research and development related to capture rates, CO 2 transport and storage, and applications of CCS technologies to areas outside of power generation.”

To that end, MIT Joint Program researchers are pursuing an in-depth analysis of the options and costs for the transportation and long-term storage of CO 2 emissions captured by CCS technology. They are also assessing the potential of CCS in hard-to-abate economic sectors such cement, iron and steel, and fertilizer production.

This research was supported by sponsors of the MIT Joint Program and by ExxonMobil through its membership in the MIT Energy Initiative .

Reprinted with permission of MIT News

Share this article:

Related Articles:

Decarbonize and diversify

July 15, 2020 • mit

Pathways to a low-carbon future

Jan. 9, 2020 • mit